Nissan Murano Z50 (2004 year). Manual — part 140
CAN SYSTEM (TYPE 2)
LAN-57
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision: 2004 November
2004 Murano
Work Flow
AKS00A4O
1.
When there are no indications of “TRANSMISSION”, “BCM”, “METER A/C AMP”, or “IPDM E/R” on
“SELECT SYSTEM” display of CONSULT-II, print the “SELECT SYSTEM”.
2.
Print all the data of “SELF-DIAG RESULTS” for “ENGINE”, “TRANSMISSION”, “BCM”, “METER A/C
AMP”, “ABS”, and “IPDM E/R” displayed on CONSULT-II.
3.
Print all the data of “CAN DIAG SUPPORT MNTR” for “ENGINE”, “TRANSMISSION”, “BCM”, “METER A/
C AMP”, “ABS”, and “IPDM E/R” displayed on CONSULT-II.
4.
Attach the printed sheet of “SELECT SYSTEM”, “SELF-DIAG RESULTS” and “CAN DIAG SUPPORT
MNTR” onto the check sheet. Refer to
5.
Based on the indications of “SELECT SYSTEM” and the results of “CAN DIAG SUPPORT MNTR”, put
marks “v” onto the items with “No indication”, “NG”, or “UNKWN” in the check sheet table. Refer to
.
NOTE:
●
If “NG” is displayed on “INITIAL DIAG (Initial diagnosis)” as “CAN DIAG SUPPORT MNTR” for the diag-
nosed control unit, replace the control unit.
●
The “CAN DIAG SUPPORT MNTR” items, which are not in check sheet table, are not related to diag-
nostic procedure on service manual.
So it is not necessary to check the status of “CAN DIAG SUPPORT MNTR” items which are not indi-
cated in check sheet table.
6.
Check CAN communication line of the navigation system. Refer to
AV-175, "CAN Communication Line
.
7.
Attach the CAN DIAG SUPPORT MONITOR check sheet onto the check sheet. Refer to
PKIA2093E
PKIA8260E
PKIA8343E
LAN-58
[CAN]
CAN SYSTEM (TYPE 2)
Revision: 2004 November
2004 Murano
8.
Mark the “NG” or “UNKWN” item of the check sheet table with “v” from the result of CAN DIAG SUPPORT
MONITOR check sheet. Refer to
NOTE:
If “NG” is displayed on “CAN COMM” as “CAN DIAG SUPPORT MONITOR” for the diagnosed control
unit, replace the control unit. Refer to
AV-175, "CAN Communication Line Check"
9.
According to the check sheet results (example), start inspection. Refer to
.
CAN SYSTEM (TYPE 2)
LAN-59
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision: 2004 November
2004 Murano
CHECK SHEET
NOTE:
If “NG” is displayed on “INITIAL DIAG (Initial diagnosis)” or “CAN COMM” for the diagnosed control unit,
replace the control unit.
PKIA8359E
LAN-60
[CAN]
CAN SYSTEM (TYPE 2)
Revision: 2004 November
2004 Murano
PKIA8345E
CAN SYSTEM (TYPE 2)
LAN-61
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision: 2004 November
2004 Murano
CHECK SHEET RESULTS (EXAMPLE)
NOTE:
If “NG” is displayed on “INITIAL DIAG (Initial diagnosis)” or “CAN COMM” for the diagnosed control unit,
replace the control unit.
Case 1
Check harness between TCM and data link connector. Refer to
LAN-72, "Circuit Check Between TCM and
PKIA8360E
SKIA5129E
LAN-62
[CAN]
CAN SYSTEM (TYPE 2)
Revision: 2004 November
2004 Murano
Case 2
Check harness between data link connector and ABS actuator and electric unit (control unit). Refer to
"Circuit Check Between Data Link Connector and ABS Actuator and Electric Unit (Control Unit)"
PKIA8361E
SKIA5130E
CAN SYSTEM (TYPE 2)
LAN-63
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision: 2004 November
2004 Murano
Case 3
Check ECM circuit. Refer to
.
PKIA8362E
SKIA5131E
LAN-64
[CAN]
CAN SYSTEM (TYPE 2)
Revision: 2004 November
2004 Murano
Case 4
Check TCM circuit. Refer to
PKIA8363E
SKIA5132E
CAN SYSTEM (TYPE 2)
LAN-65
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision: 2004 November
2004 Murano
Case 5
Check display control unit circuit. Refer to
LAN-74, "Display Control Unit Circuit Check"
PKIA8364E
SKIA5133E
LAN-66
[CAN]
CAN SYSTEM (TYPE 2)
Revision: 2004 November
2004 Murano
Case 6
Check data link connector circuit. Refer to
LAN-75, "Data Link Connector Circuit Check"
PKIA8365E
SKIA5134E
CAN SYSTEM (TYPE 2)
LAN-67
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision: 2004 November
2004 Murano
Case 7
Check BCM circuit. Refer to
.
PKIA8366E
SKIA5135E
LAN-68
[CAN]
CAN SYSTEM (TYPE 2)
Revision: 2004 November
2004 Murano
Case 8
Check unified meter and A/C amp. circuit. Refer to
LAN-76, "Unified Meter and A/C Amp. Circuit Check"
.
PKIA8367E
SKIA5136E
CAN SYSTEM (TYPE 2)
LAN-69
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision: 2004 November
2004 Murano
Case 9
Check ABS actuator and electric unit (control unit) circuit. Refer to
LAN-76, "ABS Actuator and Electric Unit
.
PKIA8368E
SKIA5137E
LAN-70
[CAN]
CAN SYSTEM (TYPE 2)
Revision: 2004 November
2004 Murano
Case 10
Check IPDM E/R circuit. Refer to
LAN-77, "IPDM E/R Circuit Check"
.
Case 11
Check CAN communication circuit. Refer to
LAN-77, "CAN Communication Circuit Check"
.
PKIA8369E
SKIA5138E
PKIA8370E
CAN SYSTEM (TYPE 2)
LAN-71
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision: 2004 November
2004 Murano
Case 12
Check IPDM E/R ignition relay circuit continuously sticks “OFF”. Refer to
LAN-80, "IPDM E/R Ignition Relay
Case 13
Check IPDM E/R ignition relay circuit continuously sticks “ON”. Refer to
LAN-80, "IPDM E/R Ignition Relay Cir-
.
PKIA8371E
PKIA8372E
LAN-72
[CAN]
CAN SYSTEM (TYPE 2)
Revision: 2004 November
2004 Murano
Circuit Check Between TCM and Data Link Connector
AKS00A4P
1.
CHECK HARNESS FOR OPEN CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect the negative battery terminal.
3.
Disconnect ECM connector and harness connector M82.
4.
Check continuity between harness connector M82 terminals 8
(L), 9 (Y) and data link connector M24 terminals 6 (L), 14 (Y).
OK or NG
OK
>> Connect all the connectors and diagnose again. Refer to
.
NG
>> Repair harness.
Circuit Check Between Data Link Connector and ABS Actuator and Electric Unit
(Control Unit)
AKS00A4Q
1.
CHECK CONNECTOR
1.
Turn ignition switch OFF.
2.
Disconnect the negative battery terminal.
3.
Check following terminals and connectors for damage, bend and loose connection (connector side and
harness side).
–
Harness connector M9
–
Harness connector B2
–
Harness connector B4
–
Harness connector E105
OK or NG
OK
>> GO TO 2.
NG
>> Repair terminal or connector.
2.
CHECK HARNESS FOR OPEN CIRCUIT
1.
Disconnect harness connector M9.
2.
Check continuity between data link connector M24 terminals 6
(L), 14 (Y) and harness connector M9 terminals 1 (L), 10 (Y).
OK or NG
OK
>> GO TO 3.
NG
>> Repair harness.
8 (L) - 6 (L)
: Continuity should exist.
9 (Y) - 14 (Y)
: Continuity should exist.
SKIA5014E
6 (L) - 1 (L)
: Continuity should exist.
14 (Y) - 10 (Y)
: Continuity should exist.
SKIA5015E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст