Nissan Murano Z50 (2004 year). Manual — part 161
CAN SYSTEM (TYPE 12)
LAN-393
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision: 2004 November
2004 Murano
TKWB0052E
LAN-394
[CAN]
CAN SYSTEM (TYPE 12)
Revision: 2004 November
2004 Murano
Work Flow
AKS00A5Q
1.
When there are no indications of “TRANSMISSION”, “BCM”, “METER A/C AMP”, “AUTO DRIVE POS.”,
or “IPDM E/R” on “SELECT SYSTEM” display of CONSULT-II, print the “SELECT SYSTEM”.
2.
Print all the data of “SELF-DIAG RESULTS” for “ENGINE”, “TRANSMISSION”, “BCM”, “METER A/C
AMP”, “AUTO DRIVE POS.”, “ALL MODE AWD/4WD”, “ABS”, and “IPDM E/R” displayed on CONSULT-II.
3.
Print all the data of “CAN DIAG SUPPORT MNTR” for “ENGINE”, “TRANSMISSION”, “BCM”, “METER A/
C AMP”, “AUTO DRIVE POS.”, “ALL MODE AWD/4WD”, “ABS”, and “IPDM E/R” displayed on CON-
SULT-II.
4.
Attach the printed sheet of “SELECT SYSTEM”, “SELF-DIAG RESULTS” and “CAN DIAG SUPPORT
MNTR” onto the check sheet. Refer to
5.
Based on the indications of “SELECT SYSTEM” and the results of “CAN DIAG SUPPORT MNTR”, put
marks “v” onto the items with “No indication”, “NG”, or “UNKWN” in the check sheet table. Refer to
NOTE:
●
If “NG” is displayed on “INITIAL DIAG (Initial diagnosis)” as “CAN DIAG SUPPORT MNTR” for the diag-
nosed control unit, replace the control unit.
●
The “CAN DIAG SUPPORT MNTR” items, which are not in check sheet table, are not related to diag-
nostic procedure on service manual.
So it is not necessary to check the status of “CAN DIAG SUPPORT MNTR” items which are not indi-
cated in check sheet table.
6.
Check CAN communication line of the navigation system. Refer to
AV-175, "CAN Communication Line
7.
Attach the CAN DIAG SUPPORT MONITOR check sheet onto the check sheet. Refer to
PKIA2093E
PKIA8260E
PKIA8343E
CAN SYSTEM (TYPE 12)
LAN-395
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision: 2004 November
2004 Murano
8.
Mark the “NG” or “UNKWN” item of the check sheet table with “v” from the result of CAN DIAG SUPPORT
MONITOR check sheet. Refer to
NOTE:
If “NG” is displayed on “CAN COMM” as “CAN DIAG SUPPORT MONITOR” for the diagnosed control
unit, replace the control unit. Refer to
AV-175, "CAN Communication Line Check"
9.
According to the check sheet results (example), start inspection. Refer to
LAN-396
[CAN]
CAN SYSTEM (TYPE 12)
Revision: 2004 November
2004 Murano
CHECK SHEET
NOTE:
If “NG” is displayed on “INITIAL DIAG (Initial diagnosis)” or “CAN COMM” for the diagnosed control unit,
replace the control unit.
PKIA8525E
CAN SYSTEM (TYPE 12)
LAN-397
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision: 2004 November
2004 Murano
PKIA8508E
LAN-398
[CAN]
CAN SYSTEM (TYPE 12)
Revision: 2004 November
2004 Murano
CHECK SHEET RESULTS (EXAMPLE)
NOTE:
If “NG” is displayed on “INITIAL DIAG (Initial diagnosis)” or “CAN COMM” for the diagnosed control unit,
replace the control unit.
Case 1
Check harness between TCM and data link connector. Refer to
LAN-412, "Circuit Check Between TCM and
PKIA8526E
SKIA5409E
CAN SYSTEM (TYPE 12)
LAN-399
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision: 2004 November
2004 Murano
Case 2
Check harness between data link connector and driver seat control unit. Refer to
Between Data Link Connector and Driver Seat Control Unit"
.
PKIA8527E
SKIA5410E
LAN-400
[CAN]
CAN SYSTEM (TYPE 12)
Revision: 2004 November
2004 Murano
Case 3
Check harness between driver seat control unit and ABS actuator and electric unit (control unit). Refer to
.
PKIA8528E
SKIA5411E
CAN SYSTEM (TYPE 12)
LAN-401
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision: 2004 November
2004 Murano
Case 4
Check ECM circuit. Refer to
PKIA8529E
SKIA5412E
LAN-402
[CAN]
CAN SYSTEM (TYPE 12)
Revision: 2004 November
2004 Murano
Case 5
Check TCM circuit. Refer to
.
PKIA8530E
SKIA5413E
CAN SYSTEM (TYPE 12)
LAN-403
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision: 2004 November
2004 Murano
Case 6
Check display control unit circuit. Refer to
LAN-415, "Display Control Unit Circuit Check"
PKIA8531E
SKIA5414E
LAN-404
[CAN]
CAN SYSTEM (TYPE 12)
Revision: 2004 November
2004 Murano
Case 7
Check data link connector circuit. Refer to
LAN-416, "Data Link Connector Circuit Check"
PKIA8532E
SKIA5415E
CAN SYSTEM (TYPE 12)
LAN-405
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision: 2004 November
2004 Murano
Case 8
Check BCM circuit. Refer to
PKIA8533E
SKIA5416E
LAN-406
[CAN]
CAN SYSTEM (TYPE 12)
Revision: 2004 November
2004 Murano
Case 9
Check unified meter and A/C amp. circuit. Refer to
LAN-417, "Unified Meter and A/C Amp. Circuit Check"
PKIA8534E
SKIA5417E
CAN SYSTEM (TYPE 12)
LAN-407
[CAN]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
Revision: 2004 November
2004 Murano
Case 10
Check driver seat control unit circuit. Refer to
LAN-417, "Driver Seat Control Unit Circuit Check"
PKIA8535E
SKIA5418E
LAN-408
[CAN]
CAN SYSTEM (TYPE 12)
Revision: 2004 November
2004 Murano
Case 11
Check AWD control unit circuit. Refer to
LAN-418, "AWD Control Unit Circuit Check"
.
PKIA8536E
SKIA5419E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст