Nissan Silvia. Manual — part 193
CONSTRUCTION
NMEL0043S02
FEL263Y
GI
MA
EM
LC
EC
FE
CL
MT
AT
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
METERS AND GAUGES
Combination Meter (Cont’d)
EL-61
Schematic
NMEL0324
TEL801B
METERS AND GAUGES
Schematic
EL-62
Wiring Diagram — METER —
NMEL0045
TEL802B
GI
MA
EM
LC
EC
FE
CL
MT
AT
PD
AX
SU
BR
ST
RS
BT
HA
SC
IDX
METERS AND GAUGES
Wiring Diagram — METER —
EL-63
Meter/Gauge Operation and Odo/Trip Meter
Segment Check in Diagnosis Mode
NMEL0151
DIAGNOSIS FUNCTION
NMEL0151S01
I
Odo/trip meter segment can be checked in diagnosis mode.
I
Meters/gauges can be checked in diagnosis mode.
HOW TO ALTERNATE DIAGNOSIS MODE
NMEL0151S02
1.
Turn ignition switch to ON and change odo/trip meter to “TRIP
A” or “TRIP B”.
2.
Turn ignition switch to OFF.
3.
Turn ignition switch to ON when pushing odo/trip meter switch.
4.
Confirm that trip meter indicates “0000.0”.
5.
Push odo/trip meter switch more than three times within 5
seconds.
SEL110V
6.
All odo/trip meter segments should be turned on.
NOTE:
If some segments are not turned on, unified meter control unit with
odo/trip meter should be replaced.
At this point, the unified control meter is turned to diagnosis
mode.
SEL248Y
7.
Push odo/trip meter switch. Indication of each meter/gauge
should be as shown left during pushing odo/trip meter switch
if it is no malfunctioning.
NOTE:
It takes about a few seconds for indication of fuel gauge and water
temperature gauge to become stable.
METERS AND GAUGES
Meter/Gauge Operation and Odo/Trip Meter Segment Check in Diagnosis Mode
EL-64
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст