Nissan Silvia. Manual — part 16
3
CHECK SHIFT UP (D
2
TO D
3
)
Does A/T shift from D
2
to D
3
at the specified speed?
Read gear position, throttle opening and vehicle speed.
Specified speed when shifting from D
2
to D
3
:
Refer to Shift schedule, AT-288.
SAT955I
Yes or No
Yes
©
GO TO 4.
No
©
Go to “13. A/T Does Not Shift: D
2
,
D
3
”, AT-171.
4
CHECK SHIFT UP (D
3
TO D
4
)
Does A/T shift from D
3
to D
4
at the specified speed?
Read gear position, throttle opening and vehicle speed.
Specified speed when shifting from D
3
to D
4
:
Refer to Shift schedule, AT-288.
SAT956I
Yes or No
Yes
©
GO TO 5.
No
©
Go to “14. A/T Does Not Shift: D
3
,
D
4
”, AT-174.
GI
MA
EM
LC
EC
FE
CL
MT
PD
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
TROUBLE DIAGNOSIS — BASIC INSPECTION
Road Test (Cont’d)
AT-61
5
CHECK LOCK-UP (D
4
TO D
4
L/U)
Does A/T perform lock-up at the specified speed?
Read vehicle speed, throttle position when lock-up duty becomes 94%.
Specified speed when lock-up occurs:
Refer to Shift schedule, AT-288.
SAT957I
Yes or No
Yes
©
GO TO 6.
No
©
Go to “15. A/T Does Not Perform Lock-up”, AT-177.
6
CHECK HOLD LOCK-UP
Does A/T hold lock-up condition for more than 30 seconds?
Yes or No
Yes
©
GO TO 7.
No
©
Go to “16. A/T Does Not Hold Lock-up Condition”, AT-179.
7
CHECK LOCK-UP OFF (D
4
L/U TO D
4
)
1. Release accelerator pedal.
2. Is lock-up released when accelerator pedal is released?
SAT958I
Yes or No
Yes
©
GO TO 8.
No
©
Go to “17. Lock-up Is Not Released”, AT-181.
TROUBLE DIAGNOSIS — BASIC INSPECTION
Road Test (Cont’d)
AT-62
8
CHECK SHIFT DOWN (D
4
TO D
3
)
1. Decelerate vehicle by applying foot brake lightly.
2. Does engine speed return to idle smoothly when A/T is shifted from D
4
to D
3
?
Read gear position and engine speed.
SAT959I
Yes or No
Yes
©
1. Stop vehicle.
2. Go to “Cruise test — Part 2”, AT-64.
No
©
Go to “18. Engine Speed Does Not Return To Idle (Light Braking D
4
,
D
3
)”, AT-182.
GI
MA
EM
LC
EC
FE
CL
MT
PD
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
TROUBLE DIAGNOSIS — BASIC INSPECTION
Road Test (Cont’d)
AT-63
Cruise Test — Part 2
=NMAT0024S0405
1
CHECK STARTING GEAR (D
1
) POSITION
1. Confirm overdrive control switch is in “ON” position.
2. Confirm selector lever is in “D” position.
3. Accelerate vehicle by half throttle again.
4. Does vehicle start from D
1
?
Read gear position.
SAT495G
Yes or No
Yes
©
GO TO 2.
No
©
Go to “19. Vehicle Does Not Start From D
1
”, AT-184.
2
CHECK SHIFT UP AND SHIFT DOWN (D
3
TO D
4
TO D
2
)
1. Accelerate vehicle to 80 km/h (50 MPH) as shown in illustration.
2. Release accelerator pedal and then quickly depress it fully.
3. Does A/T shift from D
4
to D
2
as soon as accelerator pedal is depressed fully?
Read gear position and throttle position.
SAT404H
Yes or No
Yes
©
GO TO 3.
No
©
Go to “12. A/T Does Not Shift: D
3
,
D
4
Or Does Not Kickdown: D
4
,
D
2
”, AT-168.
TROUBLE DIAGNOSIS — BASIC INSPECTION
Road Test (Cont’d)
AT-64
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст