Nissan Silvia. Manual — part 286
the dye with the system oil. Depending on the leak size, oper-
ating conditions and location of the leak, it may take from min-
utes to days for the dye to penetrate a leak and become visible.
Belt
TENSION ADJUSTMENT
NMHA0103
I
Refer to EM-16, “Checking Drive Belt”.
Idle Air Control Valve (IACV) — Auxiliary Air
Control (AAC) Valve
INSPECTION
NMHA0104
I
Refer to EC-209, “System Description” and HA-14.
ZHA028H
A/C Control System
REMOVAL AND INSTALLATION
NMHA0290
1.
Remove cluster lid C.
I
Refer to BT-22, “Removal and Installation”.
2.
Remove audio (radio).
3.
Remove four screws of A/C control unit.
4.
Disconnect A/C control unit harness connectors.
5.
Remove A/C control unit.
6.
Installation is the reverse order of removal.
GI
MA
EM
LC
EC
FE
CL
MT
AT
PD
AX
SU
BR
ST
RS
BT
SC
EL
IDX
SERVICE PROCEDURE
Fluorescent Dye Leak Detector (Cont’d)
HA-95
DISASSEMBLY
NMHA0291
ZHA087H
RHA042G
Ventilation Air Filter
FUNCTION
NMHA0268
Air inside passenger compartment is kept clean at either recircula-
tion or fresh mode by installing ventilation air filter into cooling unit.
NOTE:
To replace ventilation air filter, refer to MA-7, “PERIODIC
MAINTENANCE”.
Caution label is fixed inside the glove box.
ZHA082H
REPLACEMENT PROCEDURE
NMHA0269
1.
Remove glove box.
2.
Remove
the
instrument
panel
reinforcement.
Refer
to
“REMOVAL”, HA-89.
3.
Remove filter cover fix clip.
4.
Disconnect the thermal amp. connector.
ZHA083H
5.
Slide the filter cover to the upper side and then remove it.
6.
Remove the ventilation air filter from cooling unit.
7.
Replace with new one and reinstall on cooling unit.
8.
Reinstall filter cover, clip, instrument panel reinforcement and
glove box.
SERVICE PROCEDURE
A/C Control System (Cont’d)
HA-96
ZHA084H
9.
Fill in the necessary details on the label and attach it to the
glove box in the position shown at left.
ZHA088H
WASHING
NMHA0294
1.
Dip the filter into water containing detergent.
2.
Move the filter gently to wash it.
3.
Dip the filter into clean water to rinse it.
4.
Dry the filter using shop air.
CAUTION:
I
A dirty filter is the cause of mould and offensive odors.
I
The filter can only be washed and reused 1 to 2 times.
I
If filter performance is not improved, replace the filter with
a new one.
GI
MA
EM
LC
EC
FE
CL
MT
AT
PD
AX
SU
BR
ST
RS
BT
SC
EL
IDX
SERVICE PROCEDURE
Ventilation Air Filter (Cont’d)
HA-97
Manual
COMPRESSOR
NMHA0105
Model
ZEXEL make DKV-11G
Type
Vane rotary
Displacement
cm
3
(cu in)/rev.
110 (6.71)
Direction of rotation
Clockwise (viewed from drive end)
Drive belt
Poly V
LUBRICANT
NMHA0106
Model
ZEXEL make DKV-11G
Name
Nissan A/C System Oil Type R
Part number*
KLH00-PAGR0
Capacity
m
(US fl oz, Imp fl oz)
Total in system
180 (6.1, 6.3)
Compressor (Service part) charging
amount
180 (6.1, 6.3)
*: Always check with Parts Department for the latest part information.
REFRIGERANT
NMHA0107
Type
HFC-134a (R-134a)
Capacity
kg (lb)
0.45 - 0.55 (0.99 - 1.21)
ENGINE IDLING SPEED (WHEN A/C IS ON)
NMHA0108
I
Refer to EC-225, “Idle Speed and Ignition Timing”.
BELT TENSION
NMHA0109
I
Refer to EM-16, “Checking Drive Belt”.
SERVICE DATA AND SPECIFICATIONS (SDS)
Manual
HA-98
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст