Qashqai J11. Power window control system — part 5
AUTO OPERATION DOES NOT OPERATE BUT MANUAL OPERATE NORMAL-
LY (DRIVER SIDE)
PWC-65
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
AUTO OPERATION DOES NOT OPERATE BUT MANUAL OPERATE NOR-
MALLY (DRIVER SIDE)
Diagnosis Procedure
INFOID:0000000010286518
1.
PERFORM INITIALIZATION PROCEDURE
Initialization procedure is executed and operation is confirmed.
Refer to
.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> GO TO 2.
2.
CHECK ENCODER CIRCUIT
Check encoder circuit.
Refer to
PWC-51, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> GO TO 1.
PWC-66
< SYMPTOM DIAGNOSIS >
ANTI-PINCH SYSTEM DOES NOT OPERATE NORMALLY (DRIVER SIDE)
ANTI-PINCH SYSTEM DOES NOT OPERATE NORMALLY (DRIVER SIDE)
Diagnosis Procedure
INFOID:0000000010286519
1.
PERFORM INITIALIZATION PROCEDURE
Initialization procedure is executed and operation is confirmed.
Refer to
.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> GO TO 2.
2.
CHECK ENCODER CIRCUIT
Check encoder circuit.
Refer to
PWC-51, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection normal?
YES
>> Check intermittent incident. Refer to
GI-44, "Intermittent Incident"
.
NO
>> GO TO 1.
POWER WINDOW LOCK SWITCH DOES NOT FUNCTION
PWC-67
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
POWER WINDOW LOCK SWITCH DOES NOT FUNCTION
Diagnosis Procedure
INFOID:0000000010286520
1.
REPLACE POWER WINDOW MAIN SWITCH
Replace power window main switch. Refer to
PWC-68, "POWER WINDOW MAIN SWITCH : Removal and
>> INSPECTION END
PWC-68
< REMOVAL AND INSTALLATION >
FRONT POWER WINDOW SWITCH
REMOVAL AND INSTALLATION
FRONT POWER WINDOW SWITCH
POWER WINDOW MAIN SWITCH
POWER WINDOW MAIN SWITCH : Removal and Installation
INFOID:0000000010286521
CAUTION:
Never bend the pawl of power window main switch finisher.
REMOVAL
1.
Disconnect the battery negative terminal. Refer to
PG-155, "Removal and Installation"
2.
Remove power window main switch finisher. Refer to
INT-12, "FRONT DOOR FINISHER : Removal and
.
3.
Remove power window main switch
from power window main
switch finisher
using remover tool (A).
INSTALLATION
Note the following items, and then install in the reverse order of removal.
NOTE:
If power window main switch is replaced or is removed, it is necessary to perform the initialization procedure.
Refer to
.
FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
FRONT POWER WINDOW SWITCH (PASSENGER SIDE) : Removal and Installation
INFOID:0000000010286550
CAUTION:
Never bend the pawl of front power window switch (passenger side) finisher.
REMOVAL
1.
Remove front power window switch (passenger side) finisher. Refer to
.
2.
Remove front power window switch (passenger side)
from
front power window switch (passenger side) finisher
using
remover tool (A).
INSTALLATION
Install in the reverse order of removal.
: Pawl
JMKIB2995ZZ
: Pawl
JMKIB2996ZZ
REAR POWER WINDOW SWITCH
PWC-69
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
REAR POWER WINDOW SWITCH
Removal and Installation
INFOID:0000000010286547
CAUTION:
Never bend the pawl of rear power window switch finisher.
REMOVAL
1.
Remove rear power window switch finisher. Refer to
INT-15, "REAR DOOR FINISHER : Removal and
.
2.
Remove rear power window switch
from rear power window
switch finisher
using remover tool (A).
INSTALLATION
Install in the reverse order of removal.
: Pawl
JMKIB2997ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст