Nissan Pathfinder (2009 year). Manual — part 209
DLN-154
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ATX14B]
TRANSFER ASSEMBLY
10. Remove the companion flange using suitable tool.
11. Remove the center case bolts, harness bracket and air breather.
12. Remove the filler plug and gasket.
13. Separate the center case from the front case. Then remove the
center case from the front case by prying it up using suitable
tool.
CAUTION:
Do not damage the mating surfaces.
14. Remove the shift rod components together with the 2-4 sleeve
and L-H sleeve.
15. Remove the shift cross from the front case, using shift rod (A).
16. Remove the 2-4 sleeve and L-H sleeve from the 2-4 fork and L-
H fork respectively.
WDIA0133E
SDIA2100E
SDIA2101E
AWDIA0015ZZ
SMT992C
2009 Pathfinder
TRANSFER ASSEMBLY
DLN-155
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ATX14B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
17. Drive out the retaining pin from the shift rod using suitable tool.
18. Remove the L-H fork, 2-4 fork, shift fork spring and fork guide
from the shift rod.
19. Remove the input oil seal from the front case using suitable tool.
CAUTION:
Do not damage front case or sun gear.
20. Remove the snap ring from the sun gear.
CAUTION:
Do not damage front case or sun gear.
21. Remove the sun gear assembly and planetary carrier assembly
from the front case using Tool.
WDIA0134E
SDIA2142E
SDIA3382E
SDIA2144E
Tool munber
: ST35300000 (
—
)
SDIA2145E
2009 Pathfinder
DLN-156
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ATX14B]
TRANSFER ASSEMBLY
22. Remove the snap ring and internal gear using suitable tool.
23. Remove the front oil seal using suitable tool.
CAUTION:
Do not damage front case.
24. Remove the snap ring from the front case.
25. Remove the input bearing from the front case using Tool.
26. Remove the snap ring from the planetary carrier assembly using
suitable tool.
SMT004D
SDIA2170E
SDIA2171E
Tool number
: ST33200000 (J-26082)
SDIA2178E
SDIA2792E
2009 Pathfinder
TRANSFER ASSEMBLY
DLN-157
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ATX14B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
27. Remove the sun gear assembly from the planetary carrier
assembly.
28. Remove the snap ring from the sun gear assembly using suit-
able tool.
29. Remove the carrier bearing from the sun gear using Tools.
30. Remove the needle bearing from the sun gear using Tool.
31. Remove the metal bushing from the sun gear using Tools.
SDIA2147E
SDIA2148E
Tool number
A: ST35300000 (
—
)
B: ST30031000 (
—
)
SDIA2149E
Tool number
: ST33710000 (
—
)
SDIA2354E
Tool number
A: ST33710000 (
—
)
B: ST35325000 (
—
)
C: ST3329000 (J-34286)
SDIA2168E
2009 Pathfinder
DLN-158
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ATX14B]
TRANSFER ASSEMBLY
Center Case
1.
Remove the rear case assembly. Refer to
DLN-150, "Disassembly and Assembly"
2.
Remove the front case assembly. Refer to
DLN-150, "Disassembly and Assembly"
.
3.
Hold the front drive shaft with one hand and tap to remove the
front drive shaft with the drive chain.
CAUTION:
Do not tap drive chain.
4.
Remove the front drive shaft front bearing using Tools.
5.
Remove the front drive shaft rear bearing using suitable tools.
6.
Remove the neutral-4LO and ATP switches.
SMT900C
Tool number
A: ST33052000 (
—
)
B: ST30031000 (
—
)
SDIA2106E
Tool number
A: ST33052000 (
—
)
B: ST30031000 (
—
)
SDIA2107E
SDIA2096E
2009 Pathfinder
TRANSFER ASSEMBLY
DLN-159
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ATX14B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
7.
Remove the bolts and main oil pump cover.
8.
Remove the outer gear, inner gear and main oil pump housing
from the center case.
9.
Remove the seal ring from the main oil pump cover.
10. Remove the stem bleeder from the bleed hole.
11. Remove the snap ring and washer holder from the mainshaft.
SDIA2130E
SDIA2131E
SDIA2783E
SDIA2780E
SDIA2104E
2009 Pathfinder
DLN-160
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ATX14B]
TRANSFER ASSEMBLY
12. Remove the C-rings from the mainshaft using suitable tool.
13. Set the center case on the press stand. Remove the mainshaft
from the center case.
14. Remove the snap ring from the mainshaft using suitable tool.
15. Remove the thrust needle bearing from the press flange.
16. Press the press flange until the snap ring is out of place using
Tools.
SDIA2105E
SDIA2108E
SDIA2110E
SDIA2109E
Tool number
A: ST22452000 (J-34335)
B: ST30911000 (
—
)
C: KV31103300 (
—
)
SDIA2111E
2009 Pathfinder
TRANSFER ASSEMBLY
DLN-161
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ATX14B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
17. Remove the snap ring from the mainshaft using suitable tool.
18. Remove the press flange from the mainshaft.
19. Remove the return spring assembly from the clutch hub.
20. Remove each plate from the clutch drum.
21. Remove the snap ring from the mainshaft.
SDIA2112E
SMT910C
SMT911C
SMT912C
SDIA2113E
2009 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст