Nissan Pathfinder (2009 year). Manual — part 608
DIAGNOSIS SENSOR UNIT
SRC-71
< ECU DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
ABHIA0062GB
2009 Pathfinder
SRC-72
< ECU DIAGNOSIS >
DIAGNOSIS SENSOR UNIT
ABHIA0063GB
2009 Pathfinder
DIAGNOSIS SENSOR UNIT
SRC-73
< ECU DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
ABHIA0064GB
2009 Pathfinder
SRC-74
< ECU DIAGNOSIS >
DIAGNOSIS SENSOR UNIT
ABHIA0065GB
2009 Pathfinder
DIAGNOSIS SENSOR UNIT
SRC-75
< ECU DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
Trouble Diagnosis with CONSULT-III
INFOID:0000000003937639
DIAGNOSTIC CODE CHART
NOTE:
Follow the procedures in numerical order when repairing malfunctioning parts. Confirm whether malfunction is
eliminated using air bag warning lamp or CONSULT-III each time repair is finished. If malfunction is still
observed, proceed to the next step. When malfunction is eliminated, further repair work is not required.
ABHIA0066GB
2009 Pathfinder
SRC-76
< ECU DIAGNOSIS >
DIAGNOSIS SENSOR UNIT
CONSULT-III name
DTC
DTC detecting condition
Repair order
DRIVER AIRBAG MODULE
[OPEN]
B1049
Driver air bag module circuit (DR1) is
open
(including the spiral cable).
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the driver air bag module.
4.
Replace the spiral cable.
5.
Replace the air bag diagnosis sensor unit.
6.
Replace the related harness.
B1054
Driver air bag module circuit (DR2) is
open
(including the spiral cable).
DRIVER AIRBAG MODULE
[VB-SHORT]
B1050
Driver air bag module circuit (DR1) is
shorted to a power supply circuit
(including the spiral cable).
B1055
Driver air bag module circuit (DR2) is
shorted to a power supply circuit
(including the spiral cable).
DRIVER AIRBAG MODULE
[GND-SHORT]
B1051
Driver air bag module circuit (DR1) is
shorted to ground
(including the spiral cable).
B1056
Driver air bag module circuit (DR2) is
shorted to ground
(including the spiral cable).
DRIVER AIRBAG MODULE
[SHORT]
B1052
Driver air bag module circuits (DR1) are
shorted to each other
(including the spiral cable).
B1057
Driver air bag module circuits (DR2) are
shorted to each other
(including the spiral cable).
ASSIST A/B MODULE
[OPEN]
B1065
Front passenger air bag module circuit
(AS1) is open.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the front passenger air bag module.
4.
Replace the air bag diagnosis sensor unit.
5.
Replace the related harness.
B1070
Front passenger air bag module circuit
(AS2) is open.
ASSIST A/B MODULE
[VB-SHORT]
B1066
Front passenger air bag module circuit
(AS1) is shorted to a power supply cir-
cuit.
B1071
Front passenger air bag module circuit
(AS2) is shorted to a power supply cir-
cuit.
ASSIST A/B MODULE
[GND-SHORT]
B1067
Front passenger air bag module circuit
(AS1) is shorted to ground.
B1072
Front passenger air bag module circuit
(AS2) is shorted to ground.
ASSIST A/B MODULE
[SHORT]
B1068
Front passenger air bag module circuits
(AS1) are shorted to each other.
B1073
Front passenger air bag module circuits
(AS2) are shorted to each other.
SIDE MODULE LH
[OPEN]
B1134
Front LH side air bag module circuit is
open.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the front LH seat back assembly.
4.
Replace the air bag diagnosis sensor unit.
5.
Replace the related harness.
SIDE MODULE LH
[VB-SHORT]
B1135
Front LH side air bag module circuit is
shorted to a power supply circuit.
SIDE MODULE LH
[GND-SHORT]
B1136
Front LH side air bag module circuit is
shorted to ground.
SIDE MODULE LH
[SHORT]
B1137
Front LH side air bag module circuits are
shorted to each other.
2009 Pathfinder
DIAGNOSIS SENSOR UNIT
SRC-77
< ECU DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
SIDE MODULE RH
[OPEN]
B1129
Front RH side air bag module circuit is
open.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the front RH seat back assembly.
4.
Replace the air bag diagnosis sensor unit.
5.
Replace the related harness.
SIDE MODULE RH
[VB-SHORT]
B1130
Front RH side air bag module circuit is
shorted to a power supply circuit.
SIDE MODULE RH
[GND-SHORT]
B1131
Front RH side air bag module circuit is
shorted to ground.
SIDE MODULE RH
[SHORT]
B1132
Front RH side air bag module circuits
are shorted to each other.
FR CURTN MODULE LH
[OPEN]
B1198
LH side curtain air bag module (front)
circuit is open.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the LH side curtain air bag module.
4.
Replace the air bag diagnosis sensor unit.
5.
Replace the related harness.
FR CURTN MODULE LH
[VB-SHORT]
B1199
LH side curtain air bag module (front)
circuit is shorted to a power supply cir-
cuit.
FR CURTN MODULE LH
[GND-SHORT]
B1200
LH side curtain air bag module (front)
circuit is shorted to ground.
FR CURTN MODULE LH
[SHORT]
B1201
LH side curtain air bag module (front)
circuits are shorted to each other.
FR CURTN MODULE RH
[OPEN]
B1193
RH side curtain air bag module (front)
circuit is open.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the RH side curtain air bag module.
4.
Replace the air bag diagnosis sensor unit.
5.
Replace the related harness.
FR CURTN MODULE RH
[VB-SHORT]
B1194
RH side curtain air bag module (front)
circuit is shorted to a power supply cir-
cuit.
FR CURTN MODULE RH
[GND-SHORT]
B1195
RH side curtain air bag module (front)
circuit is shorted to ground.
FR CURTN MODULE RH
[SHORT]
B1196
RH side curtain air bag module (front)
circuits are shorted to each other.
CURTAIN MODULE LH
[OPEN]
B1150
LH side curtain air bag module (rear) cir-
cuit is open.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the LH side curtain air bag module.
4.
Replace the air bag diagnosis sensor unit.
5.
Replace the related harness.
CURTAIN MODULE LH
[VB-SHORT]
B1151
LH side curtain air bag module (rear) cir-
cuit is shorted to a power supply circuit.
CURTAIN MODULE LH
[GND-SHORT]
B1152
LH side curtain air bag module (rear) cir-
cuit is shorted to ground.
CURTAIN MODULE LH
[SHORT]
B1153
LH side curtain air bag module (rear) cir-
cuits are shorted to each other.
CURTAIN MODULE RH
[OPEN]
B1145
RH side curtain air bag module (rear)
circuit is open.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the RH side curtain air bag module.
4.
Replace the air bag diagnosis sensor unit.
5.
Replace the related harness.
CURTAIN MODULE RH
[VB-SHORT]
B1146
RH side curtain air bag module (rear)
circuit is shorted to a power supply cir-
cuit.
CURTAIN MODULE RH
[GND-SHORT]
B1147
RH side curtain air bag module (rear)
circuit is shorted to ground.
CURTAIN MODULE RH
[SHORT]
B1148
RH side curtain air bag module (rear)
circuits are shorted to each other.
PRE-TEN FRONT LH
[OPEN]
B1086
LH seat belt pre-tensioner circuit is
open.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the front LH seat belt pre-tensioner.
4.
Replace the air bag diagnosis sensor unit.
5.
Replace the related harness.
PRE-TEN FRONT LH
[VB-SHORT]
B1087
LH seat belt pre-tensioner circuit is
shorted to a power supply circuit.
PRE-TEN FRONT LH
[GND-SHORT]
B1088
LH seat belt pre-tensioner circuit is
shorted to ground.
PRE-TEN FRONT LH
[SHORT]
B1089
LH seat belt pre-tensioner circuits are
shorted to each other.
CONSULT-III name
DTC
DTC detecting condition
Repair order
2009 Pathfinder
SRC-78
< ECU DIAGNOSIS >
DIAGNOSIS SENSOR UNIT
PRE-TEN FRONT RH
[OPEN]
B1081
RH seat belt pre-tensioner circuit is
open.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the front RH seat belt pre-tensioner.
4.
Replace the air bag diagnosis sensor unit.
5.
Replace the related harness.
PRE-TEN FRONT RH
[VB-SHORT]
B1082
RH seat belt pre-tensioner circuit is
shorted to a power supply circuit.
PRE-TEN FRONT RH
[GND-SHORT]
B1083
RH seat belt pre-tensioner circuit is
shorted to ground.
PRE-TEN FRONT RH
[SHORT]
B1084
RH seat belt pre-tensioner circuits are
shorted to each other.
CRASH ZONE SEN
[UNIT FAIL]
B1033
Crash zone sensor has malfunctioned.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the crash zone sensor.
4.
Replace the air bag diagnosis sensor unit.
5.
Replace the related harness.
B1034
CRASH ZONE SEN
[COMM FAIL]
B1035
Crash zone sensor communication er-
ror.
SATELLITE SENS LH
[UNIT FAIL]
B1118
LH side air bag satellite sensor has mal-
functioned.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the LH side air bag satellite sensor.
4.
Replace the air bag diagnosis sensor unit.
5.
Replace the related harness.
B1119
SATELLITE SENS LH
[COMM FAIL]
B1120
LH side air bag satellite sensor commu-
nication error.
SATELLITE SENS RH
[UNIT FAIL]
B1113
RH side air bag satellite sensor has mal-
functioned.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the RH side air bag satellite sensor.
4.
Replace the air bag diagnosis sensor unit.
5.
Replace the related harness.
B1114
SATELLITE SENS RH
[COMM FAIL]
B1115
RH side air bag satellite sensor commu-
nication error.
CONTROL UNIT
B1XXX
Air bag diagnosis sensor unit is malfunc-
tioning.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the air bag diagnosis sensor unit.
4.
Replace the related harness.
PASS A/B INDCTR CKT
B1023
Front passenger air bag OFF indicator is
malfunctioning.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the front passenger air bag OFF in-
dicator.
4.
Replace the air bag diagnosis sensor unit.
5.
Replace the related harness.
OCCUPANT SENS C/U
[UNIT FAIL]
B1017
The OCS control unit is malfunctioning.
1.
Replace the RH front seat cushion assembly.
Do not disassemble the seat cushion assem-
bly.
B1020
B1021
OCCUPANT SENS
[UNIT FAIL]
B1018
The OCS sensor is malfunctioning.
BELT TENSION SENS
[UNIT FAIL]
B1019
The belt tension sensor is malfunction-
ing.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the RH front seat belt assembly.
4.
Replace the RH front seat cushion assembly.
Do not disassemble the seat cushion assem-
bly.
5.
Replace the related harness.
OCCUPANT SENS C/U
[COMM FAIL]
B1022
Communication between the OCS con-
trol unit and the air bag diagnosis sensor
unit is interrupted.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the RH front seat cushion assembly.
Do not disassemble the seat cushion assem-
bly.
4.
Replace the air bag diagnosis sensor unit.
5.
Replace the related harness.
FRONTAL COLLISION DE-
TECTION
B1209
Driver and/or front passenger air bag
modules are deployed.
Refer to
SR-18, "For Frontal Collision"
.
CONSULT-III name
DTC
DTC detecting condition
Repair order
2009 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст