Nissan Pathfinder (2009 year). Manual — part 21
PRE-INSPECTION FOR DIAGNOSTIC
ADP-155
< ON-VEHICLE MAINTENANCE >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
ON-VEHICLE MAINTENANCE
PRE-INSPECTION FOR DIAGNOSTIC
Basic Inspection
INFOID:0000000003935607
1.
CHECK POWER SUPPLY AND DROUND CIRCUIT
Check the power supply and ground circuit as shown below.
• Driver seat control unit :Refer to
ADP-42, "DRIVER SEAT CONTROL UNIT : Diagnosis Procedure"
• Automatic drive positioner control unit: Refer to
ADP-42, "AUTOMATIC DRIVE POSITIONER CONTROL
.
Is the inspection result normally?
YES
>> GO TO 2
NO
>> Repair or replace the malfunctioning part.
2.
CHECK MANUAL FUNCTION
Check the manual function operations by operating the relevant switches as shown below.
• Seat (slide, reclining, lifting front, lifting rear)
• Pedal assembly (forward, backward)
• Door mirror
Do all manual functions operate normally?
YES
>> GO TO 3
NO (Seat, pedal, door mirror)>>Go to SYMPTOM 1, refer to
. And, GO TO 4 if
the result of SYMPTOM 1 is OK.
3.
CHECK MEMORY FUNCTION 1
Register the seat positions (refer to Owner’s Manual) and check that all parts of the seat, pedals, and door mir-
rors move to their memory positions correctly.
Are the operations normal?
YES
>> Check each malfunction according to the instruction of the SYMPTOM 4, refer to
NO (memory indicator operates normally)>> Go to SYMPTOM 2, refer to
NO (memory indicator does not operate normally either)>> GO TO 5
4.
CHECK MEMORY FUNCTION 2
Register the seat positions (refer to Owner’s Manual) and check that all parts of the seat, pedals, and door mir-
rors move to their memory positions correctly.
Are the operations normal?
YES
>> Check intermittent incident. Refer to
GI-49, "Intermittent Incident"
.
NO
>> GO TO 7
5.
CHECK SEAT MEMORY SWITCH/MEMORY INDICATOR
Check the seat memory switch/memory switch indicator of the SYMPTOM 5, refer to
.
Is the inspection result normal?
YES
>> GO TO 6
NO
>> Repair or replace the malfunctioning part.
6.
CHECK OPERATION CONDITION
Check the memory operation conditions (refer to
ADP-10, "AUTOMATIC DRIVE POSITIONER SYSTEM :
Are all operation conditions fulfilled?
YES
>> Go to SYMPTOM 6, refer to
.
NO
>> Fulfill the operation conditions. Refer to
ADP-10, "AUTOMATIC DRIVE POSITIONER SYSTEM :
.
7.
CHECK MECHANISM
2009 Pathfinder
ADP-156
< ON-VEHICLE MAINTENANCE >
PRE-INSPECTION FOR DIAGNOSTIC
Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.
Is any malfunction present in the relevant parts?
YES
>> Go to SYMPTOM 3, refer to
NO
>> Repair or replace the malfunctioning part.
2009 Pathfinder
PREPARATION
ADP-157
< PREPARATION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
PREPARATION
PREPARATION
Special Service Tool
INFOID:0000000003935608
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Commercial Service Tool
INFOID:0000000003935609
Tool number
(Kent-Moore No.)
Tool name
Description
—
(J-39570)
Chassis ear
Locating the noise
—
(J-43980)
NISSAN Squeak and Rattle
Kit
Repairing the cause of noise
SIIA0993E
SIIA0994E
(Kent-Moore No.)
Tool name
Description
(J-39565)
Engine ear
Locating the noise
SIIA0995E
2009 Pathfinder
ADP-158
< ON-VEHICLE REPAIR >
DRIVER SEAT CONTROL UNIT
ON-VEHICLE REPAIR
DRIVER SEAT CONTROL UNIT
Removal and Installation
INFOID:0000000003935610
for removal and installation of driver seat control unit.
2009 Pathfinder
AUTOMATIC DRIVE POSITIONER CONTROL UNIT
ADP-159
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
AUTOMATIC DRIVE POSITIONER CONTROL UNIT
Removal and Installation
INFOID:0000000003935611
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove the battery negative terminal.
2.
Remove the instrument driver lower panel. Refer to
IP-11, "Removal and Installation"
.
3.
Remove the screw (A).
4.
Remove automatic drive positioner control unit (1) from bracket
and disconnect electrical connectors.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Clamp the harness in position.
NOTE:
After installing the automatic drive positioner control unit, perform additional service when disconnecting bat-
tery negative terminal. Refer to
ADP-8, "Special Repair Requirement"
ALIIA0210GB
2009 Pathfinder
ADP-160
< ON-VEHICLE REPAIR >
SEAT MEMORY SWITCH
SEAT MEMORY SWITCH
Removal and Installation
INFOID:0000000003935612
INT-14, "Removal and Installation"
for removal and installation of seat memory switch.
2009 Pathfinder
DOOR MIRROR REMOTE CONTROL SWITCH
ADP-161
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
DOOR MIRROR REMOTE CONTROL SWITCH
Removal and Installation
INFOID:0000000003935613
MIR-15, "Door Mirror Assembly"
for removal and installation of door mirror remote control switch.
2009 Pathfinder
ADP-162
< ON-VEHICLE REPAIR >
PEDAL ADJUSTING MOTOR
PEDAL ADJUSTING MOTOR
Removal and Installation
INFOID:0000000003935614
ACC-4, "Removal and Installation"
BR-23, "Removal and Installation"
brake pedal when removing pedal adjusting motors.
2009 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст