Murano Cross Cabriolet Z51 (2013 year). Manual — part 8
MANUAL FUNCTION DOES NOT OPERATE
ADP-109
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
SYMPTOM DIAGNOSIS
MANUAL FUNCTION DOES NOT OPERATE
ALL COMPONENT
ALL COMPONENT : Diagnosis Procedure
INFOID:0000000008463650
1.
CHECK DRIVER SEAT CONTROL UNIT POWER SUPPLY AND GROUND CIRCUIT
Check driver seat control unit power supply and ground circuit.
Refer to
ADP-50, "DRIVER SEAT CONTROL UNIT : Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunction parts.
2.
CHECK AUTOMATIC DRIVE POSITIONER CONTROL UNIT POWER SUPPLY AND GROUND CIRCUIT
Check automatic drive positioner control unit power supply and ground circuit.
Refer to
ADP-50, "AUTOMATIC DRIVE POSITIONER CONTROL UNIT : Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
POWER SEAT
POWER SEAT : Diagnosis Procedure
INFOID:0000000008463651
1.
CHECK POWER SEAT SWITCH GROUND CIRCUIT
Check power seat switch ground circuit.
Refer to
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness or connector.
2.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
TILT & TELESCOPIC
TILT & TELESCOPIC : Diagnosis Procedure
INFOID:0000000008463652
1.
CHECK TILT & TELESCOPIC SWITCH GROUND CIRCUIT
Check tilt & telescopic switch ground circuit.
Refer to
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness or connector.
2.
CONFIRM THE OPERATION
Confirm the operation again.
Revision: 2012 October
2013 Murano CrossCabriolet
ADP-110
< SYMPTOM DIAGNOSIS >
MANUAL FUNCTION DOES NOT OPERATE
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
SEAT SLIDING
SEAT SLIDING : Diagnosis Procedure
INFOID:0000000008463653
1.
CHECK SLIDING MECHANISM
Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunction parts.
2.
CHECK SLIDING SWITCH
Check sliding switch.
Refer to
ADP-52, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CHECK SLIDING MOTOR
Check sliding motor.
Refer to
ADP-91, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunction parts.
4.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
SEAT RECLINING
SEAT RECLINING : Diagnosis Procedure
INFOID:0000000008463654
1.
CHECK RECLINING MECHANISM
Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunction parts.
2.
CHECK RECLINING SWITCH
Check reclining switch.
Refer to
ADP-55, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CHECK RECLINING MOTOR
Check reclining motor.
Refer to
ADP-93, "Component Function Check"
Revision: 2012 October
2013 Murano CrossCabriolet
MANUAL FUNCTION DOES NOT OPERATE
ADP-111
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunction parts.
4.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
SEAT LIFTING (FRONT)
SEAT LIFTING (FRONT) : Diagnosis Procedure
INFOID:0000000008463655
1.
CHECK LIFTING (FRONT) MECHANISM
Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunction parts.
2.
CHECK LIFTING SWITCH (FRONT)
Check lifting switch (front).
Refer to
ADP-58, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CHECK LIFTING MOTOR (FRONT)
Check lifting motor (front).
Refer to
ADP-96, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunction parts.
4.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
SEAT LIFTING (REAR)
SEAT LIFTING (REAR) : Diagnosis Procedure
INFOID:0000000008463656
1.
CHECK LIFTING (REAR) MECHANISM
Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunction parts.
2.
CHECK LIFTING SWITCH (REAR)
Check lifting switch (rear).
Refer to
ADP-60, "Component Function Check"
Is the inspection result normal?
Revision: 2012 October
2013 Murano CrossCabriolet
ADP-112
< SYMPTOM DIAGNOSIS >
MANUAL FUNCTION DOES NOT OPERATE
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CHECK LIFTING MOTOR (REAR)
Check lifting motor (rear).
Refer to
ADP-98, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunction parts.
4.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
STEERING TILT
STEERING TILT : Diagnosis Procedure
INFOID:0000000008463657
1.
CHECK STEERING TILT MECHANISM
Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunction parts.
2.
CHECK TILT SWITCH
Check tilt switch.
Refer to
ADP-62, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CHECK TILT MOTOR
Check tilt motor.
Refer to
ADP-100, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunction parts.
4.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
STEERING TELESCOPIC
STEERING TELESCOPIC : Diagnosis Procedure
INFOID:0000000008463658
1.
CHECK STEERING TELESCOPIC MECHANISM
Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.
Is the inspection result normal?
YES
>> GO TO 2.
Revision: 2012 October
2013 Murano CrossCabriolet
MANUAL FUNCTION DOES NOT OPERATE
ADP-113
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
NO
>> Repair or replace the malfunction parts.
2.
CHECK TELESCOPIC SWITCH
Check telescopic switch.
Refer to
ADP-64, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CHECK TELESCOPIC MOTOR
Check telescopic motor.
Refer to
ADP-102, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunction parts.
4.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
DOOR MIRROR
DOOR MIRROR : Diagnosis Procedure
INFOID:0000000008463659
1.
CHECK DOOR MIRROR MECHANISM
Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunction parts.
2.
CHECK DOOR MIRROR REMOTE CONTROL SWITCH
Check door mirror remote control switch. Refer to the following.
• Mirror switch: Refer to
ADP-68, "MIRROR SWITCH : Component Function Check"
.
• Changeover switch: Refer to
ADP-69, "CHANGEOVER SWITCH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CHECK DOOR MIRROR MOTOR
Check door mirror motor.
Refer to
ADP-104, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunction parts.
4.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
Revision: 2012 October
2013 Murano CrossCabriolet
ADP-114
< SYMPTOM DIAGNOSIS >
MEMORY FUNCTION DOES NOT OPERATE
MEMORY FUNCTION DOES NOT OPERATE
ALL COMPONENT
ALL COMPONENT : Diagnosis Procedure
INFOID:0000000008463660
1.
CHECK MANUAL OPERATION
Check manual operation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunction parts.
2.
PERFORM MEMORY STORING PROCEDURE
1.
Perform memory storing procedure.
Refer to
.
2.
Check memory function.
Refer to
ADP-15, "MEMORY FUNCTION : System Description"
.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> GO TO 3.
3.
CHECK SEAT MEMORY SWITCH
Check seat memory switch.
Refer to
ADP-66, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace seat memory switch. Refer to
ADP-123, "Removal and Installation"
.
4.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
SEAT SLIDING
SEAT SLIDING : Diagnosis Procedure
INFOID:0000000008463661
1.
CHECK MANUAL OPERATION
Check manual operation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
ADP-110, "SEAT SLIDING : Diagnosis Procedure"
2.
CHECK SLIDING SENSOR
Check sliding sensor.
Refer to
ADP-74, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
SEAT RECLINING
Revision: 2012 October
2013 Murano CrossCabriolet
MEMORY FUNCTION DOES NOT OPERATE
ADP-115
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
SEAT RECLINING : Diagnosis Procedure
INFOID:0000000008463662
1.
CHECK MANUAL OPERATION
Check manual operation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
ADP-110, "SEAT RECLINING : Diagnosis Procedure"
2.
CHECK RECLINING SENSOR
Check reclining sensor.
Refer to
ADP-76, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
SEAT LIFTING (FRONT)
SEAT LIFTING (FRONT) : Diagnosis Procedure
INFOID:0000000008463663
1.
CHECK MANUAL OPERATION
Check manual operation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
ADP-111, "SEAT LIFTING (FRONT) : Diagnosis Procedure"
2.
CHECK LIFTING SENSOR (FRONT)
Check lifting sensor (front).
Refer to
ADP-78, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
SEAT LIFTING (REAR)
SEAT LIFTING (REAR) : Diagnosis Procedure
INFOID:0000000008463664
1.
CHECK MANUAL OPERATION
Check manual operation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
ADP-111, "SEAT LIFTING (REAR) : Diagnosis Procedure"
2.
CHECK LIFTING SENSOR (REAR)
Check lifting sensor (rear).
Refer to
ADP-80, "Component Function Check"
Revision: 2012 October
2013 Murano CrossCabriolet
ADP-116
< SYMPTOM DIAGNOSIS >
MEMORY FUNCTION DOES NOT OPERATE
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
STEERING TILT
STEERING TILT : Diagnosis Procedure
INFOID:0000000008463665
1.
CHECK MANUAL OPERATION
Check manual operation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
ADP-112, "STEERING TILT : Diagnosis Procedure"
2.
CHECK TILT SENSOR
Check steering tilt sensor.
Refer to
ADP-82, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
STEERING TELESCOPIC
STEERING TELESCOPIC : Diagnosis Procedure
INFOID:0000000008463666
1.
CHECK MANUAL OPERATION
Check manual operation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
ADP-112, "STEERING TELESCOPIC : Diagnosis Procedure"
2.
CHECK TELESCOPIC SENSOR
Check steering telescopic sensor.
Refer to
ADP-84, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
DOOR MIRROR
Revision: 2012 October
2013 Murano CrossCabriolet
MEMORY FUNCTION DOES NOT OPERATE
ADP-117
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
DOOR MIRROR : Diagnosis Procedure
INFOID:0000000008463667
1.
CHECK MANUAL OPERATION
Check manual operation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
ADP-113, "DOOR MIRROR : Diagnosis Procedure"
2.
CHECK MIRROR SENSOR
Check mirror sensor. Refer to the following.
• Driver side:
ADP-87, "DRIVER SIDE : Component Function Check"
• Passenger side:
ADP-88, "PASSENGER SIDE : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
Revision: 2012 October
2013 Murano CrossCabriolet
ADP-118
< SYMPTOM DIAGNOSIS >
MEMORY INDICATE DOES NOT OPERATE
MEMORY INDICATE DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000008463668
1.
CHECK SEAT MEMORY INDICATOR
Check seat memory indicator.
Refer to
ADP-107, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunction parts.
2.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
Revision: 2012 October
2013 Murano CrossCabriolet
INTELLIGENT KEY INTERLOCK FUNCTION DOES NOT OPERATE
ADP-119
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
INTELLIGENT KEY INTERLOCK FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000008463669
1.
PERFORM INTELLIGENT KEY INTERLOCK STORING PROCEDURE
1.
Perform Intelligent Key interlock storing procedure.
Refer to
.
2.
Check the operation.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> GO TO 2.
2.
CHECK DOOR LOCK FUNCTION
Check door lock function.
Refer to
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check the intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
Revision: 2012 October
2013 Murano CrossCabriolet
ADP-120
< SYMPTOM DIAGNOSIS >
NORMAL OPERATING CONDITION
NORMAL OPERATING CONDITION
Description
INFOID:0000000008463670
The following symptoms are normal operations, and they do not indicate a malfunction.
Symptom
Cause
Action to take
Reference page
Lumbar support does not per-
form memory operation.
The lumbar support system are con-
trolled independently with no link to the
automatic drive positioner system.
—
Lumbar support system:
SE-10, "LUMBAR SUP-
PORT SYSTEM : Sys-
tem Description"
Memory function or Intelligent
Key interlock function does not
operate.
The operating conditions are not fulfilled.
Fulfill the operation
conditions.
Memory function:
ADP-15, "MEMORY
FUNCTION : System
Description"
Intelligent Key interlock
function:
TELLIGENT KEY IN-
TERLOCK FUNCTION :
System Description"
Revision: 2012 October
2013 Murano CrossCabriolet
DRIVER SEAT CONTROL UNIT
ADP-121
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
REMOVAL AND INSTALLATION
DRIVER SEAT CONTROL UNIT
Removal and Installation
INFOID:0000000008463671
REMOVAL
1.
Remove driver seat. Refer to
SE-28, "Removal and Installation"
2.
Remove mounting nuts (A).
3.
Remove driver seat control unit (2) from driver seat (1).
INSTALLATION
Install in the reverse order of removal.
NOTE:
After installing the driver seat, perform additional service when replacing control unit. Refer to
JMJIA1449ZZ
Revision: 2012 October
2013 Murano CrossCabriolet
ADP-122
< REMOVAL AND INSTALLATION >
AUTOMATIC DRIVE POSITIONER CONTROL UNIT
AUTOMATIC DRIVE POSITIONER CONTROL UNIT
Removal and Installation
INFOID:0000000008463672
REMOVAL
1.
Remove instrument lower panel LH. Refer to
2.
Remove screw (A).
3.
Remove automatic drive positioner control unit (1).
INSTALLATION
Install in the reverse order of removal.
NOTE:
After installing the driver seat, perform additional service when replacing control unit. Refer to
JMJIA1388ZZ
Revision: 2012 October
2013 Murano CrossCabriolet
SEAT MEMORY SWITCH
ADP-123
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
SEAT MEMORY SWITCH
Removal and Installation
INFOID:0000000008463673
REMOVAL
1.
Remove seat memory switch finisher. Refer to
2.
Press pawls and remove seat memory switch (2) from seat
memory finisher (1).
INSTALLATION
Install in the reverse order of removal.
:
Pawl
JMJIA1450ZZ
Revision: 2012 October
2013 Murano CrossCabriolet
ADP-124
< REMOVAL AND INSTALLATION >
POWER SEAT SWITCH
POWER SEAT SWITCH
Removal and Installation
INFOID:0000000008463674
REMOVAL
1.
Remove seat cushion outer finisher. Refer to
2.
Remove screws (A), and then remove power seat switch (2)
from seat cushion outer finisher (1).
INSTALLATION
Install in the reverse order of removal.
JMJIA1451ZZ
Revision: 2012 October
2013 Murano CrossCabriolet
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст