Nissan Juke (2012 year). Service Repair Manual — part 58
DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK SWITCH
DLK-211
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
SYMPTOM DIAGNOSIS
DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK
SWITCH
ALL DOOR
ALL DOOR : Description
INFOID:0000000007579016
All doors do not lock/unlock using door lock and unlock switch.
ALL DOOR : Diagnosis Procedure
INFOID:0000000007579017
1.
CHECK DOOR LOCK AND UNLOCK SWITCH
Check door lock and unlock switch.
Refer to
DLK-199, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK DOOR LOCK ACTUATOR
Check front door lock assembly (driver side).
Refer to
DLK-194, "DRIVER SIDE : Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-141, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-43, "Intermittent Incident"
.
DRIVER SIDE
DRIVER SIDE : Description
INFOID:0000000007579018
Driver side door does not lock/unlock using door lock and unlock switch.
DRIVER SIDE : Diagnosis Procedure
INFOID:0000000007579019
1.
CHECK DOOR LOCK ACTUATOR
Check front door lock assembly (driver side).
Refer to
DLK-194, "DRIVER SIDE : Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-141, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-43, "Intermittent Incident"
.
PASSENGER SIDE
Revision: 2011 October
2012 JUKE
DLK-212
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK SWITCH
PASSENGER SIDE : Description
INFOID:0000000007579020
Passenger side door does not lock/unlock using door lock and unlock switch.
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000007579021
1.
CHECK DOOR LOCK ACTUATOR
Check front door lock assembly (passenger side).
Refer to
DLK-195, "PASSENGER SIDE : Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-141, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-43, "Intermittent Incident"
.
REAR LH
REAR LH : Description
INFOID:0000000007579022
Rear LH side door does not lock/unlock using door lock and unlock switch.
REAR LH : Diagnosis Procedure
INFOID:0000000007579023
1.
CHECK DOOR LOCK ACTUATOR
Check rear door lock assembly LH.
Refer to
DLK-196, "REAR LH : Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-141, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-43, "Intermittent Incident"
.
REAR RH
REAR RH : Description
INFOID:0000000007579024
Rear RH side door does not lock/unlock using door lock and unlock switch.
REAR RH : Diagnosis Procedure
INFOID:0000000007579025
1.
CHECK DOOR LOCK ACTUATOR
Check rear door lock assembly RH
Refer to
DLK-197, "REAR RH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-141, "Removal and Installation"
.
Revision: 2011 October
2012 JUKE
DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK SWITCH
DLK-213
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-43, "Intermittent Incident"
.
Revision: 2011 October
2012 JUKE
DLK-214
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
DOOR DOES NOT LOCK/UNLOCK WITH DOOR KEY CYLINDER OPERATION
DOOR DOES NOT LOCK/UNLOCK WITH DOOR KEY CYLINDER OPERA-
TION
Diagnosis Procedure
INFOID:0000000007579026
1.
CHECK POWER DOOR LOCK OPERATION
Check power door lock operation.
Does door lock/unlock with door lock and unlock switch?
YES
>> GO TO 2.
NO
>> Go to
DLK-211, "ALL DOOR : Diagnosis Procedure"
2.
CHECK DOOR KEY CYLINDER SWITCH
Check door key cylinder switch.
Refer to
DLK-192, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-141, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-43, "Intermittent Incident"
.
Revision: 2011 October
2012 JUKE
DOOR DOES NOT LOCK/UNLOCK WITH KEYFOB
DLK-215
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR DOES NOT LOCK/UNLOCK WITH KEYFOB
Diagnosis Procedure
INFOID:0000000007579027
1.
CHECK POWER DOOR LOCK OPERATION
Check power door lock operation.
Does door lock/unlock with door lock and unlock switch?
YES
>> GO TO 2.
NO
>> Go to
DLK-211, "ALL DOOR : Diagnosis Procedure"
2.
CHECK REMOTE KEYLESS ENTRY RECEIVER
Check remote keyless entry receiver.
Refer to
DLK-208, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK DOOR KEY CYLINDER SWITCH
Check door key cylinder switch.
Refer to
DLK-192, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK DOOR SWITCH
Check door switch.
Refer to
DLK-201, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK KEYFOB BATTERY
Check keyfob battery.
Refer to
DLK-207, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-141, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-43, "Intermittent Incident"
.
Revision: 2011 October
2012 JUKE
DLK-216
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
BACK DOOR DOES NOT OPENED
BACK DOOR DOES NOT OPENED
Diagnosis Procedure
INFOID:0000000007579028
1.
CHECK BACK DOOR OPENER SWITCH
Check back door opener switch.
Refer to
DLK-190, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK BACK DOOR OPENER ACTUATOR
Check back door opener actuator.
Refer to
DLK-189, "Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK VEHICLE SPEED SIGNAL
Check vehicle speed signal.
Refer to
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-141, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-43, "Intermittent Incident"
.
Revision: 2011 October
2012 JUKE
SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE
DLK-217
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000007579029
1.
CHECK “DOOR LOCK–UNLOCK SET” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT.
2.
Select “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT” mode.
3.
Check “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”
Refer to
DLK-177, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"
Is the inspection result normal?
YES
>> GO TO 2
NO
>> Set “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”
2.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-141, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-43, "Intermittent Incident"
.
Revision: 2011 October
2012 JUKE
DLK-218
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
VEHICLE SPEED SENSING AUTO LOCK OPERATION DOES NOT OPERATE
VEHICLE SPEED SENSING AUTO LOCK OPERATION DOES NOT OPER-
ATE
Diagnosis Procedure
INFOID:0000000007579030
1.
CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT.
2.
Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode.
3.
Check “AUTOMATIC LOCK/UNLOCK SELECT” setting in “WORK SUPPORT”.
Refer to
DLK-177, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “Lock Only” or “Lock/Unlock” in “WORK SUPPORT”.
2.
CHECK “AUTOMATIC DOOR LOCK SELECT” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT.
2.
Select “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT” mode.
3.
Check “AUTOMATIC DOOR LOCK SELECT” setting in “WORK SUPPORT”.
Refer to
DLK-177, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set “VH SPD” in “AUTOMATIC DOOR LOCK SELECT”.
3.
REPLACE BCM
• Replace BCM. Refer to
BCS-141, "Removal and Installation"
.
• Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-43, "Intermittent Incident"
.
Revision: 2011 October
2012 JUKE
IGN OFF INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE
DLK-219
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
IGN OFF INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000007579031
1.
CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT.
2.
Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode.
3.
Check “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
Refer to
DLK-177, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
2.
CHECK “AUTOMATIC DOOR UNLOCK SELECT” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT.
2.
Select “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT” mode.
3.
Check “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.
Refer to
DLK-177, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.
3.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-141, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-43, "Intermittent Incident"
.
Revision: 2011 October
2012 JUKE
DLK-220
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
P RANGE INTERLOCK DOOR LOCK/UNLOCK FUNCTION DOES NOT OPER-
ATE
P RANGE INTERLOCK DOOR LOCK/UNLOCK FUNCTION DOES NOT OP-
ERATE
Diagnosis Procedure
INFOID:0000000007579032
1.
CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT.
2.
Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode.
3.
Check “AUTOMATIC LOCK/UNLOCK SELECT” setting in “WORK SUPPORT”.
Refer to
DLK-177, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “Unlock Only”, “Lock Only” or “Lock/Unlock” in “AUTOMATIC LOCK/UNLOCK SELECT”.
2.
CHECK “AUTOMATIC DOOR LOCK SELECT” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT.
2.
Select “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT” mode.
3.
Check “AUTOMATIC DOOR LOCK SELECT” setting in “WORK SUPPORT”.
Refer to
DLK-177, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set “P RANGE” in “AUTOMATIC DOOR LOCK SELECT”.
3.
CHECK “AUTOMATIC DOOR UNLOCK SELECT” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT.
2.
Select “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT” mode.
3.
Check “AUTOMATIC DOOR UNLOCK SELECT” setting in “WORK SUPPORT”.
Refer to
DLK-177, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Set “MODE 2” or “MODE 4” in “AUTOMATIC DOOR UNLOCK SELECT”.
4.
CHECK TCM
Check TCM for DTC.
Refer to
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-141, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-43, "Intermittent Incident"
.
Revision: 2011 October
2012 JUKE
AUTO DOOR LOCK OPERATION DOES NOT OPERATE
DLK-221
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
AUTO DOOR LOCK OPERATION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000007579033
1.
CHECK “AUTO LOCK SET” SETTING WITH CONSULT
1.
Select “MULTI REMOTE ENT” of “BCM” using CONSULT.
2.
Select “AUTO LOCK SET” in “WORK SUPPORT” mode.
3.
Check “AUTO LOCK SET” in “WORK SUPPORT”.
Refer to
DLK-179, "MULTI REMOTE ENT : CONSULT Function (BCM - MULTI REMOTE ENT)"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “AUTO LOCK SET” in “WORK SUPPORT”.
2.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-141, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-43, "Intermittent Incident"
.
Revision: 2011 October
2012 JUKE
DLK-222
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
UNLOCK LINK FUNCTION DOES NOT OPERATE
UNLOCK LINK FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000007579034
1.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-141, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-43, "Intermittent Incident"
.
Revision: 2011 October
2012 JUKE
KEY OUT INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE
DLK-223
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
KEY OUT INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000007579035
1.
CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT.
2.
Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode.
3.
Check “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
Refer to
DLK-177, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
2.
CHECK “AUTOMATIC DOOR UNLOCK SELECT” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT.
2.
Select “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT” mode.
3.
Check “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.
Refer to
DLK-177, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.
3.
CHECK KEY SWITCH
Check key switch.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-141, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-43, "Intermittent Incident"
.
Revision: 2011 October
2012 JUKE
DLK-224
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
KEY REMINDER FUNCTION DOES NOT OPERATE
KEY REMINDER FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000007579036
1.
CHECK DOOR LOCK AND UNLOCK SWITCH
Check door lock and unlock switch.
Refer to
DLK-199, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK KEY SWITCH
Check key switch.
Refer to
DLK-205, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK DRIVER SIDE DOOR SWITCH
Check driver side door switch.
Refer to
DLK-201, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-141, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-43, "Intermittent Incident"
.
Revision: 2011 October
2012 JUKE
HAZARD REMINDER OPERATION DOES NOT OPERATE
DLK-225
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
HAZARD REMINDER OPERATION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000007579037
1.
CHECK DTC WITH BCM AND COMBINATION METER
Check that DTC is not detected with BCM and combination meter.
Is the inspection result normal?
YES
>> GO TO 2.
NO-1
>> Refer to
NO-2
>> Refer to
. (Combination meter)
2.
CHECK “HAZARD LAMP SET” SETTING IN “WORK SUPPORT”
1.
Select “MULTI REMOTE ENT” of “BCM” using CONSULT.
2.
Select “HAZARD LAMP SET” in “WORK SUPPORT” mode.
3.
Check “HAZARD LAMP SET” in “WORK SUPPORT”.
Refer to
DLK-179, "MULTI REMOTE ENT : CONSULT Function (BCM - MULTI REMOTE ENT)"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set “HAZARD LAMP SET” in “WORK SUPPORT”.
3.
CHECK HAZARD WARNING LAMP
Check hazard warning lamp.
Refer to
DLK-204, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-141, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-43, "Intermittent Incident"
.
Revision: 2011 October
2012 JUKE
DLK-226
< SYMPTOM DIAGNOSIS >
[WITHOUT INTELLIGENT KEY SYSTEM]
SQUEAK AND RATTLE TROUBLE DIAGNOSES
SQUEAK AND RATTLE TROUBLE DIAGNOSES
Work Flow
INFOID:0000000007579038
CUSTOMER INTERVIEW
Interview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diag-
nostic Worksheet during the interview to document the facts and conditions when the noise occurs and any of
customer's comments; refer to
DLK-230, "Diagnostic Worksheet"
. This information is necessary to duplicate
the conditions that exist when the noise occurs.
• The customer may not be able to provide a detailed description or the location of the noise. Attempt to obtain
all the facts and conditions that exist when the noise occurs (or does not occur).
• If there is more than one noise in the vehicle, perform a diagnosis and repair the noise that the customer is
concerned about. This can be accomplished by performing a cruise test on the vehicle with the customer.
• After identifying the type of noise, isolate the noise in terms of its characteristics. The noise characteristics
are provided so the customer, service adviser and technician are all speaking the same language when
defining the noise.
• Squeak – (Like tennis shoes on a clean floor)
Squeak characteristics include the light contact/fast movement/brought on by road conditions/hard surfaces
= higher pitch noise/softer surfaces = lower pitch noises/edge to surface = chirping
• Creak – (Like walking on an old wooden floor)
Creak characteristics include firm contact/slow movement/twisting with a rotational movement/pitch depen-
dent on materials/often brought on by activity.
• Rattle – (Like shaking a baby rattle)
Rattle characteristics include the fast repeated contact/vibration or similar movement/loose parts/missing
clip or fastener/incorrect clearance.
• Knock – (Like a knock on a door)
Knock characteristics include hollow sounding/sometimes repeating/often brought on by driver action.
• Tick – (Like a clock second hand)
Tick characteristics include gentle contacting of light materials/loose components/can be caused by driver
action or road conditions.
• Thump – (Heavy, muffled knock noise)
Thump characteristics include softer knock/dead sound often brought on by activity.
• Buzz – (Like a bumblebee)
Buzz characteristics include high frequency rattle/firm contact.
• Often the degree of acceptable noise level will vary depending up on the person. A noise that a technician
may judge as acceptable may be very irritating to the customer.
• Weather conditions, especially humidity and temperature, may have a great effect on noise level.
DUPLICATE THE NOISE AND TEST DRIVE
If possible, drive the vehicle with the customer until the noise is duplicated. Note any additional information on
the Diagnostic Worksheet regarding the conditions or location of the noise. This information can be used to
duplicate the same conditions when the repair is reconfirmed.
SBT842
Revision: 2011 October
2012 JUKE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст