Nissan Armada (2022 year). Manual in english — page 14
SPA2450-A
Automatic anti-glare type (if so
equipped)
The inside mirror is designed so that it
automatically changes reflection accord-
ing to the intensity of the headlights of
the following vehicle.
The anti-glare system will be automati-
cally turned on when the ignition switch is
placed in the ON position.
When the anti-glare system is turned on,
the indicator light
will illuminate and
excessive glare from the headlights of the
vehicle behind you will be reduced.
Push the “
*
” switch
to make the inside
rearview mirror operate normally. The
indicator light will turn off. Push the “I”
switch
to turn the system on.
Do not allow any object to cover the
sensors
or apply glass cleaner on
them. Doing so will reduce the sensitiv-
ity of the sensor, resulting in improper
operation.
For the HomeLink® Universal Transceiver
operation, see “HomeLink® Universal
Transceiver (Type A)” (P.2-83).
Intelligent Rear View Mirror (if so
equipped)
WARNING
Failure to follow the warnings and
instructions for proper use of the
Intelligent Rear View Mirror could
result in serious injury or death.
.
The Intelligent Rear View Mirror is
a convenience feature but it is not
a substitute for proper vehicle
operation. The system has areas
where objects cannot be viewed.
Check the blind spot of the In-
telligent Rear View Mirror before
vehicle operation. The driver is
always responsible for safe driv-
ing.
.
Do not disassemble or modify the
Intelligent Rear View Mirror, the
camera unit or wirings. If you do,
it may result in accidents or fire.
In case you notice smoke or smell
coming from the Intelligent Rear
View Mirror, stop using the sys-
tem immediately. It is recom-
mended that you see a NISSAN
dealer for servicing.
.
Do not operate the Intelligent
Rear View Mirror while driving.
Doing so can be a distraction
and it could lose control of your
vehicle and cause an accident or
serious injury.
.
Do not gaze into the Intelligent
Rear View Mirror display during
driving. It may cause a distraction
and it could lose control of your
vehicle and cause an accident or
serious injury.
.
Do not put a cigarette or flames
to the Intelligent Rear View Mir-
ror, the camera unit or wirings. It
may cause a fire.
.
Be sure to adjust the Intelligent
Rear View Mirror before driving.
Switch the system to the conven-
tional rearview mirror mode and
be properly seated on the driver’s
Pre-driving checks and adjustments
3-31
-------------------------------------------------------------------------------------------------------------------------------------------------------------
3-32
Pre-driving checks and adjustments
seat. Then adjust the mirror so as
to see the rear window properly.
Driving without adjusting the mir-
ror may cause difficulty in watch-
ing the display at Intelligent Rear
View Mirror mode (camera view
mode) due to the reflection from
the surface of the mirror.
.
If the Intelligent Rear View Mirror
malfunctions, immediately switch
the system to the conventional
rearview mirror mode.
.
When strong light (for example,
sunlight or high beams from fol-
lowing vehicles) enters the cam-
era, a light beam or a glaring light
may appear on the monitor
screen of the Intelligent Rear
View Mirror. In that case, switch
the system to the conventional
rearview mirror mode appropri-
ately.
.
If dirt, rain or snow accumulates
on the exterior glass surface cov-
ering the camera, the Intelligent
Rear View Mirror may not display
objects clearly. Use of the rear
window wiper/washer may im-
prove visibility, but if not, switch
the Intelligent Rear View Mirror to
the conventional rearview mirror
mode until a time the glass cov-
ering the camera can be cleaned.
WAD0190X
MENU button
Left button
Right button
Mode select lever
HomeLink® buttons (1-3)
Components:
Intelligent Rear View Mirror provides a
clear rearview from a camera located on
the rear of the vehicle. Intelligent Rear
View Mirror has two modes: conventional
rearview mirror mode and Intelligent Rear
View Mirror mode (camera view mode).
You can switch these two modes by the
mode select lever
.
When the Intelligent Rear View Mirror
mode is selected, the indicator
is
-------------------------------------------------------------------------------------------------------------------------------------------------------------
displayed.
For the operation of the HomeLink®
buttons
, see “HomeLink® Universal
Transceiver (Type B)” (P.2-87).
WAD0191X
How to change the mode:
The mode can be switched when the
ignition switch is in the ON position.
.
Pull the mode select lever
to switch
to the Intelligent Rear View Mirror
mode (camera view mode).
.
Push the mode select lever
to
switch to the conventional rearview
mirror mode.
WAD0192X
How to make settings of Intelligent Rear
View Mirror:
You can choose display settings of the
Intelligent Rear View Mirror such as
brightness, camera angle, textual indica-
tion ON or OFF and language.
When the Intelligent Rear View Mirror
mode is on, setting menu can be selected
by pushing the MENU button . Each time
the MENU button
is pushed, the setting
menu will change as follows:
MENU (initial screen)
?
BRIGHTNESS
?
DOWN/UP
?
LEFT/RIGHT
?
ROTATION
?
INDICATION
?
DIMMING MIRROR
?
LANGUAGE
?
MENU (initial screen)
Pre-driving checks and adjustments
3-33
-------------------------------------------------------------------------------------------------------------------------------------------------------------
3-34
Pre-driving checks and adjustments
NOTE:
.
To switch the image quality adjust-
ment items with the MENU button ,
push the button within 5 seconds
after completing the adjustment of
the previous item. If 5 seconds or
more pass, the monitor will return to
MENU (initial screen).
.
When one of the HomeLink® buttons
is pushed, the monitor will display
the HomeLink® screen.
WAD0193X
BRIGHTNESS
The brightness of the display screen can
be adjusted.
.
Push the left button
to dim the
screen.
.
Push the right button
to brighten
the screen.
WAD0194X
DOWN/UP
The vertical camera angle of the display
screen can be adjusted.
.
Push the left button
to down the
camera angle.
.
Push the right button
to up the
camera angle.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WAD0199X
LEFT/RIGHT
The horizontal camera angle of the dis-
play screen can be adjusted.
.
Push the left button
to move the
camera angle to the left.
.
Push the right button
to move the
camera angle to the right.
WAD0195X
ROTATION
The camera angle of the display screen
can be rotated.
.
Push the left button
to rotate the
camera angle to the left.
.
Push the right button
to rotate the
camera angle to the right.
WAD0196X
INDICATION
The textual indication can be turned on or
off on the Intelligent Rear View Mirror
display screen.
.
Push the right button
to disable the
textual indication on the display
screen.
.
Push the left button
to enable the
textual indication on the display
screen.
Pre-driving checks and adjustments
3-35
-------------------------------------------------------------------------------------------------------------------------------------------------------------
3-36
Pre-driving checks and adjustments
WAD0197X
DIMMING MIRROR
The mirror is designed so that it auto-
matically changes reflection according to
the intensity of the headlights of the
following vehicle. You can enable or
disable the automatic anti-glare mode.
.
Push the left button
to enable the
automatic anti-glare mode.
.
Push the right button
to disable the
automatic anti-glare mode.
WAD0198X
LANGUAGE
The language of the textual indication
can be selected on the Intelligent Rear
View Mirror display screen.
Select the language by using the
or
button. You can select English, French or
Spanish. The language setting will be
retained even if the engine is restarted.
Intelligent Rear View Mirror system
precautions:
NOTE:
.
Long-term use of this system in
stopping engine may cause battery
to be discharged.
.
Do not attach an antenna of wireless
device near the Intelligent Rear View
Mirror. Electric wave from wireless
device may cause disturbed image
in Intelligent Rear View Mirror.
.
Do not push buttons excessively or
operating the lever roughly may
cause a system failure or the Intelli-
gent Rear View Mirror itself to drop.
.
Never turn the body of Intelligent
Rear View Mirror by 90° or more. It
may damage the Intelligent Rear
View Mirror.
.
Do not apply strong shocks to the
body of Intelligent Rear View Mirror.
It may cause a system failure.
.
Do not apply heavy load to the
camera and camera-cover on the
rear of the vehicle. It may cause the
camera to be removed or may cause
a system failure.
.
If it is difficult to see the Intelligent
Rear View Mirror display screen be-
cause of a strong external light,
switch the mode to the conventional
rearview mirror mode for better use.
.
Close the sunshade (if so equipped)
when the Intelligent Rear View Mir-
ror display screen is unclear due to
strong external light.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
JVP0559X
Flicker image (example)
.
When LED headlights are viewed on
the Intelligent Rear View Mirror dis-
play, the images may flicker. This is
normal.
.
Due to diffused reflection from ex-
ternal environment, images on the
screen may flicker. This is not a
malfunction.
.
A quick movement of a thing may
not be able to display on the camera
view screen. This is not a malfunc-
tion.
.
Turn on the headlights at twilight or
in a tunnel, etc.
.
The Intelligent Rear View Mirror
mode (camera view mode) display
is different from the conventional
rearview mirror. Objects in the dis-
play may differ from actual distance.
Do not solely rely on the Intelligent
Rear View Mirror. Always rely on
your own operation to avoid acci-
dents.
.
If the brightness of the camera view
display is adjusted to excessive
bright level, it may cause an eye-
strain in the driving. Adjust the
brightness properly.
.
Use the rear window wiper when it
rains. If the camera view image is
still unclear when the rear window
wiper is in operation, check the
deterioration of the rear window
wiper blade.
.
When using the rear window wiper,
images on the screen may flicker.
This is not a malfunction.
.
Defog the rear window with defros-
ter when rear window is fogged. Use
the conventional rearview mirror
mode until the rear window is fully
defogged.
.
The display of the Intelligent Rear
View Mirror may become hot. This is
not a malfunction.
.
The color of an object in the distance
or in the dark may be difficult to be
recognized. This is not a malfunc-
tion.
System maintenance (Intelligent Rear
View Mirror):
.
Always keep the mirror and camera
area of the rear window clean.
.
Clean the mirror and the camera lens
with a dry soft cloth.
.
When clean the camera area of the
rear window, using a soft cloth dam-
pend with water and a few neutral
detergent. And after, the dry it up with
dry soft cloth.
.
If the image on the Intelligent Rear
View Mirror display screen is still un-
clear even after cleaning the camera
area of the rear window, an oil film
may be adhering to the rear window
glass. Clean the rear window glass
with an oil film remover.
.
Never use alcohol, benzine, thinner, or
any similar material to clean the
mirror or camera lens. It will cause a
discoloration, deterioration or a sys-
tem malfunction.
.
Do not attach a sticker (including
transparent material) on the camera
area of the rear window.
Pre-driving checks and adjustments
3-37
-------------------------------------------------------------------------------------------------------------------------------------------------------------
3-38
Pre-driving checks and adjustments
OUTSIDE MIRRORS
WARNING
.
Objects viewed in the outside
mirror on the passenger side are
closer than they appear. Be care-
ful when moving to the right.
Using only this mirror could cause
an accident. Use the inside mirror
or glance over your shoulder to
properly judge distances to other
objects.
.
Do not adjust the mirrors while
driving. You could lose control of
your vehicle and cause an acci-
dent.
SPA2739
Adjusting outside mirrors
The outside mirror control switch is
located on the driver’s door armrest.
The outside mirror will operate only when
the ignition switch is in the ACC or ON
position.
Move the switch right or left to select the
right or left side mirror
, then adjust
using the control switch
.
Defrosting outside mirrors
The outside mirrors will be heated when
the rear window defroster switch is
operated. (See “Rear window and outside
mirror defroster switch” (P.2-45).)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SPA2738
Power foldable outside mirrors
CAUTION
.
Do not touch the mirrors while
they are moving. Your hand may
be pinched, and the mirror may
malfunction.
.
Do not drive with the mirrors
stored. You will be unable to see
behind the vehicle.
.
If the mirrors were folded or
unfolded by hand, there is a
chance that the mirror will move
forward or backward during driv-
ing. If the mirrors were folded or
unfolded by hand, be sure to
adjust them again electrically be-
fore driving.
The outside mirror remote control oper-
ates when the ignition switch is in the
ACC or ON position.
To fold the outside mirrors, push the
outside mirror folding switch to the
“CLOSE” position
. To unfold, push to
the “OPEN” position
.
If mirrors are manually operated or
bumped, the mirror body can become
loose at the pivot point. To correct
electronic mirror operation, cycle the
mirrors by pushing “CLOSE” until comple-
tely closed, then push “OPEN” until the
mirrors are in the open position.
Reverse tilt-down feature (if so
equipped)
When backing up the vehicle, the right
and left outside mirrors will turn down-
ward automatically to provide better rear
visibility.
1. Place the ignition switch in the ON
position.
2. Move the shift lever to the R (Reverse)
position.
3. Choose either the right or left outside
mirror by operating the outside mirror
control switch.
4. The outside mirror surfaces move
downward.
When one of the following conditions has
occurred, the outside mirror surfaces will
return to their original positions.
.
The shift lever is moved to any posi-
tion other than R (Reverse).
.
The outside mirror control switch is
set to the center position.
.
The ignition switch is placed in the
OFF position.
Automatic anti-glare (if so
equipped)
The outside rearview mirrors are de-
signed so that its automatically change
reflection according to the intensity of
the headlights of the vehicle following
you.
The anti-glare system will be automati-
cally turned on when the ignition switch is
placed in the ON position.
Pre-driving checks and adjustments
3-39
-------------------------------------------------------------------------------------------------------------------------------------------------------------
3-40
Pre-driving checks and adjustments
SIC4448
VANITY MIRROR
To use the front vanity mirror, pull down
the sun visor and pull up the cover.
JVP0247X
SET/memory switches
The memory seat system has three
features:
.
Entry/exit function
.
Memory storage
.
Setting memory function
ENTRY/EXIT FUNCTION
This system is designed so that the
driver’s seat and steering column will
automatically move when the automatic
transmission shift lever is in the P (Park)
position. This allows the driver to get into
and out of the driver’s seat more easily.
The driver’s seat will slide backward and
the steering wheel will move up when the
driver’s door is opened with the ignition
switch in the LOCK position.
The driver’s seat and steering wheel will
return to the previous positions when the
ignition switch is pushed to the ACC
position.
The driver’s seat will not return to the
previous positions if the seat or steering
adjusting switch is operated when the
seat is at the exit position.
Cancel or activate entry/exit func-
tion
The shift lever must be in the P (Park)
position with the ignition switch in the
OFF position.
The entry/exit function can be activated
or canceled by pressing and holding the
SET switch for more than 10 seconds.
The entry/exit function can be canceled
through “Vehicle settings” in the vehicle
information display by performing the
following:
.
Switch the “Exit Seat Slide” ON to OFF.
For additional information, refer to
“Vehicle settings” (P.2-24).
.
Switch the “Exit Steering Up” ON to
OFF. For additional information, refer
to “Vehicle settings” (P.2-24).
MEMORY SEAT (if so equipped)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Initialize entry/exit function
If the battery cable is disconnected, or if
the fuse opens, the entry/exit function
will not work though this function was set
on before. In such a case, after connect-
ing the battery or replacing with a new
fuse, open and close the driver’s door
more than two times after the ignition
switch is turned from the ON position to
the LOCK position. The entry/exit func-
tion will be activated.
MEMORY STORAGE
Two positions for the driver’s seat, steer-
ing column and outside mirrors can be
stored in the memory switch. Follow
these procedures to use the memory
system.
1. Move the shift lever to the P (Park)
position.
2. Adjust the driver’s seat, steering col-
umn and outside mirrors to the de-
sired positions by manually operating
each adjusting switch. For additional
information, see “Seats” (P.1-3) and
“Tilt/telescopic steering” (P.3-29) and
“Outside mirrors” (P.3-38).
3. Push the SET switch and, within 5
seconds, push the memory switch (1
or 2) fully for at least 1 second.
The indicator light for the pushed
memory switch will stay on for ap-
proximately 5 seconds after pushing
the switch.
When the memory is stored in the
memory switch (1 or 2), a buzzer will
sound.
If memory is stored in the same
memory switch, the previous memory
will be deleted.
Linking Intelligent Key to a stored
memory position
The Intelligent Key can be linked to a
stored memory position with the follow-
ing procedure.
1. Follow the steps for storing a memory
position.
2. While the indicator light for the mem-
ory switch being set is illuminated for
5 seconds, push the
button on the
Intelligent Key. If the indicator light
blinks, the Intelligent Key is linked to
that memory setting.
Push the ignition switch to the OFF
position, and then push the
button
on the Intelligent Key. The driver’s seat,
steering wheel and outside mirrors will
move to the memorized position.
Confirming memory storage
.
Push the ignition switch to the ON
position and push the SET switch. If
the main memory has not been
stored, the indicator light will come
on for approximately 0.5 second.
When the memory has stored in posi-
tion, the indicator light will stay on for
approximately 5 seconds.
.
If the battery cable is disconnected, or
if the fuse opens, the memory will be
canceled. In this case, reset the de-
sired position using the previous pro-
cedure.
.
If optional Intelligent Keys are added
to your vehicle, the memory storage
procedure to switch 1 or 2 and linking
Intelligent Key procedure to a stored
memory position should be per-
formed again for each Intelligent Key.
For additional Intelligent Key informa-
tion, see “Keys” (P.3-2).
Selecting the memorized position
1. Move the shift lever to the P (Park)
position.
2. Use one of the following methods to
move the driver’s seat, the outside
mirrors and the steering wheel.
.
Push the memory switch (1 or 2)
fully for at least 1 second.
Pre-driving checks and adjustments
3-41
-------------------------------------------------------------------------------------------------------------------------------------------------------------
3-42
Pre-driving checks and adjustments
The driver’s seat, steering column and
outside mirrors will move to the
memorized position or to the exit
position when the entry/exit function
is set to active with the indicator light
flashing, and then the light will stay on
for approximately 5 seconds.
SETTING MEMORY FUNCTION
The status of the following settings can
be linked to the Intelligent Key and the
memorized settings can be available for
each Intelligent Key.
.
Air conditioner system
.
Navigation system (if so equipped)
.
Audio system
To use the memory function, lock the
doors with the Intelligent Key that is
linked to the settings.
To enable the memorized settings:
1. Carry the Intelligent Key that is linked
to the settings, and unlock the doors
by pushing the driver’s door handle
request switch or “UNLOCK”
but-
ton on the Intelligent Key.
2. Place the ignition switch in the ON
position. “Connection with the key has
been done” will be displayed on the
screen and the memorized settings
are available (only when a new Intel-
ligent Key is used).
SYSTEM OPERATION
The memory seat system will not work or
will stop operating under the following
conditions:
.
When the vehicle speed is above 0
MPH (0 km/h) or 4 MPH (7 km/h) for
some limited functions such linking an
Intelligent Key to the vehicle when the
power source is turned on from off or
during the Exit function.
.
When any of the memory switches are
pushed while the memory seat is
operating.
.
When the adjusting switch for the
driver’s seat and steering column is
turned on while the memory seat is
operating.
.
When the seat has already been
moved to the memorized position.
.
When no seat position is stored in the
memory switch.
.
When the shift lever is moved from the
P (Park) position to any other position.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
4 Monitor, heater, air conditioner, audio,
phone and voice recognition systems
NissanConnect® Owner’s Manual . . . . . . . . . 4-3
Safety note . . . . . . . . . . . . . . . . . . . . . . 4-3
RearView Monitor (if so equipped) . . . . . . . . . 4-4
RearView Monitor system operation . . . . . . 4-5
How to read the displayed lines . . . . . . . . 4-5
Difference between predictive and
actual distances . . . . . . . . . . . . . . . . . .. 4-6
How to park with predictive course lines . . .. 4-7
RearView Monitor settings . . . . . . . . . . . . 4-9
RearView Monitor system limitations. . . . . 4-10
System maintenance . . . . . . . . . . . . . ... 4-11
Intelligent Around View® Monitor (if
so equipped) . . . . . . . . . . . . . . . . . . . . .. 4-12
Intelligent Around View® Monitor
system operation . . . . . . . . . . . . . . . . 4-13
Intelligent Around View® Monitor settings . .. 4-21
Intelligent Around View® Monitor
system limitations . . . . . . . . . . . . . . . .. 4-23
System maintenance . . . . . . . . . . . . . ... 4-25
Camera aiding sonar function (models with
Intelligent Around View® Monitor) . . . . . . . ... 4-26
Sonar system operation . . . . . . . . . . . . 4-26
Turning on and off the sonar function . . . . 4-27
Sonar function settings . . . . . . . . . . . . . 4-28
Sonar system limitations . . . . . . . . . . . .. 4-30
System maintenance . . . . . . . . . . . . . ... 4-30
Moving Object Detection (MOD) . . . . . . . . ... 4-31
MOD system operation . . . . . . . . . . . . 4-32
Turning on and off the MOD system . . . ... 4-33
MOD function settings . . . . . . . . . . . . . 4-34
MOD system limitations . . . . . . . . . . . .. 4-34
System maintenance . . . . . . . . . . . . . 4-35
Ventilators . . . . . . . . . . . . . . . . . . . . . .. 4-36
Heater and air conditioner . . . . . . . . . . . . 4-37
Automatic air conditioner . . . . . . . . . . . 4-38
Rear automatic air conditioning system . ... 4-40
Operating tips . . . . . . . . . . . . . . . . . . 4-43
Linking Intelligent Key (if so equipped). . ... 4-43
In-cabin microfilter . . . . . . . . . . . . . . .. 4-43
Servicing air conditioner. . . . . . . . . . . . 4-43
Antenna . . . . . . . . . . . . . . . . . . . . . . . 4-43
Window antenna . . . . . . . . . . . . . . . ... 4-43
Satellite antenna . . . . . . . . . . . . . . . ... 4-44
Car phone or CB radio . . . . . . . . . . . . . . . 4-44
Rear Seat Infotainment (RSI) (if so equipped) . .. 4-45
Welcome . . . . . . . . . . . . . . . . . . . . .. 4-45
Getting started . . . . . . . . . . . . . . . . ... 4-46
Control description . . . . . . . . . . . . . . . 4-50
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Remote control operation . . . . . . . . . . ... 4-52
Remote control buttons. . . . . . . . . . . . 4-52
Wireless headphone operation . . . . . . . . 4-54
General operation. . . . . . . . . . . . . . . ... 4-55
Video operation. . . . . . . . . . . . . . . . . 4-56
HDMI/MHL connection . . . . . . . . . . . . . 4-57
USB/SD card operation . . . . . . . . . . . . .. 4-57
Slingplayer® . . . . . . . . . . . . . . . . . . . . 4-64
Miracast® . . . . . . . . . . . . . . . . . . . . . 4-66
Using the mobile application on your
mobile device. . . . . . . . . . . . . . . . . ... 4-67
SmartStream . . . . . . . . . . . . . . . . . . 4-67
Settings . . . . . . . . . . . . . . . . . . . . . 4-69
Troubleshooting . . . . . . . . . . . . . . . . 4-76
Specifications. . . . . . . . . . . . . . . . . ... 4-78
Compliance information . . . . . . . . . . . . 4-79
-------------------------------------------------------------------------------------------------------------------------------------------------------------
For models with NissanConnect® and
Services, refer to the NissanConnect®
Owner’s Manual regarding the following
information.
.
Audio system
.
Bluetooth® Hands-Free Phone
.
NissanConnect® Services
.
SiriusXM Traffic
TM
.
SiriusXM® Travel Link
.
SiriusXM® Radio
.
Navigation system
.
Voice Recognition System
.
Information and settings viewable on
NissanConnect®
.
Android Auto
TM
.
Apple CarPlay®
WARNING
.
Do not disassemble or modify
this system. If you do, it may
result in accidents, fire, or electric
shock.
.
Do not use this system if you
notice any abnormality, such as
a frozen screen or lack of sound.
Continued use of the system may
result in accident, fire or electric
shock.
.
In case you notice any foreign
object in the system hardware,
spill liquid on it, or notice smoke
or smell coming from it, stop
using the system immediately. It
is recommended you visit a
NISSAN dealer for servicing.
Ignoring such conditions may
lead to accidents, fire, or electric
shock.
.
Park the vehicle in a safe location
and apply the parking brake to
view the images on the touch
screen display.
CAUTION
Do not use the system when the
engine is not running for extended
periods of time to prevent battery
discharge.
Do not attempt to operate the system in
extreme temperature conditions [below
−4°F (−20°C) and above 158°F (70°C)].
Operating this system under these con-
ditions may result in system malfunc-
tions.
Monitor, heater, air conditioner, audio, phone and voice recognition systems
4-3
NISSANCONNECT® OWNER’S MANUAL
SAFETY NOTE
-------------------------------------------------------------------------------------------------------------------------------------------------------------
4-4
Monitor, heater, air conditioner, audio, phone and voice recognition systems
WAE0655X
1. Touch screen display
2. MENU button
3. CAMERA button
WARNING
.
Failure to follow the warnings
and instructions for proper use
of the RearView Monitor could
result in serious injury or death.
.
RearView Monitor is a conveni-
ence feature and is not a sub-
stitute for proper backing. Always
turn and look out the windows,
and check mirrors to be sure that
it is safe to move before operat-
ing the vehicle. Always back up
slowly.
.
The system is designed as an aid
to the driver in showing large
stationary objects directly behind
the vehicle, to help avoid dama-
ging the vehicle.
.
The distance guide line and the
vehicle width line should be used
as a reference only when the
vehicle is on a level paved sur-
face. The distance viewed on the
monitor is for reference only and
may be different than the actual
distance between the vehicle and
displayed objects.
CAUTION
Do not scratch the camera lens when
cleaning dirt or snow from the front
of the camera.
The RearView Monitor system automati-
REARVIEW MONITOR (if so equipped)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст