Nissan Murano Z50 (2005 year). Manual — part 19
NAVIGATION SYSTEM
AV-111
C
D
E
F
G
H
I
J
L
M
A
B
AV
Revision: 2005 August
2005 Murano
Display with Pressed “SETTING” Button
The function of each icon is as follows:
Display Settings
How To Perform Display Settings.
1.
Start the engine.
2.
Press “SETTING” button.
3.
Select “Display”.
Application Items
Brightness/Contrast/Map Background
Select “Brightness/Contrast/Map Background”.
●
Brightness, Contrast and Back ground are shown at the lower part of the screen, and it can be set by
pressing joystick.
Display Off
Select “Display Off”.
●
When setting is turned on (Indicator light ON), the display will be under sleep mode.
Setting Of the Under Section Display
Select “Setting of the under section display”.
●
The setting status that is selected from A/C or AV is shown at the lower part of the screen.
SKIA4496E
Icon
Description
Display
Settings of display can be performed.
Vehicle Electronic Systems
Settings of vehicle electrical equipment can be performed.
System Settings
Settings of linguistic select, time adjusting and beep sound can be performed.
Navigation
Settings and adjusting of navigation can be performed.
Short Menus
Easy Mode and Expert Easy Mode can be switched.
Guidance Volume
The volume and/or on/off of voice prompt can be controlled by the joystick.
Help (only easy mode)
Explanation of navigational functions appear on the display.
SKIA5791E
Icon
Description
Reference
page
Brightness/Contrast/Map Background
Brightness, Contrast and Map Background can be set.
Display Off
Display sleep mode ON/OFF can be switched.
Setting of the under section display
The setting status of A/C or AV can be shown.
AV-112
NAVIGATION SYSTEM
Revision: 2005 August
2005 Murano
Vehicle Electronic Systems
How To Perform Vehicle Electronic Systems.
1.
Start the engine.
2.
Press “SETTING” button.
3.
Select “Vehicle Electronic Systems”.
Application Items
*1: If so equipped
*2: If Intelligent Key is equipped
*3: Even if you change the horn chirp or the hazard flash with the keyfob or the Intelligent Key, the change may not be reflected in the
display. Use the keyfob or the Intelligent Key to return to the previous mode.
SKIA9490E
Icon
Description
Adjust Driver Seat When Exiting Vehicle
*1
The driver's seat automatically moves back and returns to the original position for ease
of exit and entry.
Selective Door Unlock
*2
/Remote Unlock
Driver's Door First
This key can switch the unlock doors of the 1st unlocking operation as follows:
ON (Only the driver side door)
⇔
OFF (All the doors)
Keyless Remote Response - Horn
*3
This key changes the horn chirp mode that occurs when pressing the LOCK button on
the Intelligent Key or the keyfob.
Keyless Remote Response - Lights
*3
This key changes the hazard indicator flash mode that occurs when pressing the LOCK
or UNLOCK button on the Intelligent Key or the keyfob.
Auto Re-Lock Time
The length of the auto door re-lock time can be set. Select the “Auto Re-Lock time” key,
then move the joystick and press the ENTER button to adjust the time.
Sensitivity of Automatic Headlights
Automatic light illumination can be set as desired. Select the “Sensitivity of Automatic
Headlights” key, then move joystick to the left (lower) or right (higher).
Automatic Headlights Off Delay
You can control how long it takes the automatic turn off timer to extinguish the head-
lights in the AUTO position. Select the “Automatic Headlights Off Delay” key, then move
the joystick to the left or right to adjust the timer.
Speed Dependent Wiper
This key turns on and off the driving speed dependent intermittent wiper function.
Intelligent Key Lock Response - Sound
*2
The sound pattern of the Intelligent request switch operation can be set as desired.
Select the “Intelligent Key lock response - Sound” key, then press the ENTER button to
change the sound pattern.
Intelligent Key Unlock Response - Sound
*2
The beep sounds when unlocking door with the Intelligent request switch can be turned
on or off.
Return All Settings to Default
When this key is selected and turned on using the “ENTER” button, all settings made
by VEHICLE ELECTRONICS will return to the initial conditions.
NAVIGATION SYSTEM
AV-113
C
D
E
F
G
H
I
J
L
M
A
B
AV
Revision: 2005 August
2005 Murano
System Settings
How To Perform System Settings.
1.
Start the engine.
2.
Press “SETTING” button.
3.
Select “System Settings”.
Application Items
Language Setting
Select “Language/ Unit”.
●
Language setting can be switched.
●
Unit setting can be changed.
Clock Settings
Select “Clock”.
●
Select the “Hours” or “Minutes” key and tilt the joystick to the
right or left to adjust the time.
●
Turn ON and OFF daylight saving time.
●
Select the “Auto Adjust” key. The time will be reset to the GPS
time.
●
Select the “Select Time Zone” key. The [TIME ZONE] screen will
appear.
SKIA4536E
Icon
Description
Reference
page
Language/Unit
Settings of Language or unit can be performed.
Clock
Settings of clock can be performed.
Beep Setting
Settings of Beep sound can be performed.
SKIA2065E
SKIA2063E
AV-114
NAVIGATION SYSTEM
Revision: 2005 August
2005 Murano
Beep Setting
Select “Beep Setting”.
●
When Beep Setting is on (indicator light on), a beep will sound if
the button is pressed.
NOTE:
Items in exception of Beep Setting ON/OFF.
●
An error beep.
●
An interrupted-screen beep.
Navigation Settings
How To Perform Navigation Settings.
1.
Start the engine.
2.
Press “SETTING” button.
3.
Select “Navigation”.
Application Items
SKIA4829E
SKIA0551E
Icon
Description
Reference
page
View
Map display mode can be switched.
Heading
Heading of the map display can be customized for either north heading or the
actual driving direction of the vehicle.
Nearby Display Icons
Icons of facilities can be displayed.
Facilities to be displayed can be selected from the variety selections.
Save Current Location
Current vehicle location can be registered in Address Book.
Adjust Current Location
Current location of position marker can be adjusted. Direction of position marker
also can be calibrated when heading direction of the vehicle on the display is
not matched with the actual direction.
Auto Re-route On/Off
ON/OFF of Auto Re-route can be switched.
Avoid Area Setting
A particular area can be avoided when routing.
Clear Memory
Address Book, Previous destination or Avoid area can be deleted.
Edit Address Book
Address Book can be edited.
GPS Information
The GPS data includes longitude, latitude and altitude (distance above sea
level) of the present vehicle position, and current date and time for the area in
which the vehicle is being driven.
Also indicated are the GPS reception conditions and the GPS satellite position.
Quick Stop Customer Setting
One facility of your selection can be added to your Quick Stop.
Set Average Speed for Estimated
Journey Time
Average vehicle speed can be set to calibrate estimated journey time for the
destination.
Tracking On/Off
Tracking to the present vehicle position can be displayed.
NAVIGATION SYSTEM
AV-115
C
D
E
F
G
H
I
J
L
M
A
B
AV
Revision: 2005 August
2005 Murano
“VIEW” MODE
●
To open the map screen display with BIRDVIEW
™
, select
“BIRDVIEW”
●
To open the map screen display with Plan View, select “Plan
View”.
“HEADING” MODE
●
To display North up, select “North up”.
●
To display the car heading up, select “Heading up”.
“NEARBY DISPLAY ICONS” MODE
●
Select an icon to display on the map screen.
“SAVE CURRENT LOCATION” MODE
●
The current vehicle location can be registered in “Address
Book”.
NOTE:
“Address Book” can store 50 items max.
SKIA0554E
SKIA0561E
SKIA0562E
SKIA0556E
AV-116
NAVIGATION SYSTEM
Revision: 2005 August
2005 Murano
“ADJUST CURRENT LOCATION” MODE
●
Select an icon “right” or “left” to calibrate the heading direction.
(Arrow marks will rotate corresponding to the calibration key.)
●
Select “Set”. Then the vehicle mark will be matched to the arrow
mark.
“AUTO RE-ROUTE” MODE
●
To activate “AUTO RE-ROUTE” mode, select “On”.
●
To disactivate “AUTO RE-ROUTE” mode, select “Off”.
“AVOID AREA SETTINGS” MODE
●
Areas to avoid can be registered.
SKIA0563E
SKIA0564E
SKIA0558E
SKIA0563E
NAVIGATION SYSTEM
AV-117
C
D
E
F
G
H
I
J
L
M
A
B
AV
Revision: 2005 August
2005 Murano
“CLEAR MEMORY” MODE
●
To delete all the stored places in “Address Book”, “Avoid Area”
and “Previous Dest”, select “Yes”.
“EDIT ADDRESS BOOK” MODE
●
Edit the items registered in Address Book.
“GPS INFORMATION” MODE
●
Latitude, longitude, altitude, astrometric state, and satellite loca-
tion are displayed as GPS information.
NOTE:
Altitude is displayed only in three–dimensional status.
“QUICK STOP CUSTOMER SETTING” MODE
●
Select a category for the “Quick Stop” menu.
SKIA3572E
SKIA3511E
SKIA0555E
SKIA5820E
AV-118
NAVIGATION SYSTEM
Revision: 2005 August
2005 Murano
“SET AVERAGE SPEED” MODE
●
Set the average vehicle speed to calibrate the estimated journey
time for the destination.
●
Set three items; “Freeway”, “Main Roads”, and “Ordinary
Roads”.
“TRACKING” MODE
●
To delete the tracking marks on the map, select “Off”.
●
To leave the tracking marks on the map, select “On”.
NOTE:
When a trail display is turned Off, trail data is erased from the mem-
ory.
GUIDANCE VOLUME
Description
Following guidance volume setting can be changed.
Activation/Deactivation Setting
●
The voice prompt can be turned on/off by pressing the “Guidance Volume” button.
Voice Volume Setting
●
Volume of the voice can be controlled by bending the joystick to left/right.
SKIA0565E
SKIA0559E
SKIA4497E
NAVIGATION SYSTEM
AV-119
C
D
E
F
G
H
I
J
L
M
A
B
AV
Revision: 2005 August
2005 Murano
DISPLAY WITH PRESSED “TRIP” BUTTON
●
When the “TRIP” button is pressed, the following models will display on the screen.
●
Warning message (if there are any)
→
TRIP 1
→
TRIP 2
→
FUEL ECONOMY
→
MAINTENANCE
→
OFF.
TRIP 1 OR TRIP 2
●
Elapsed time, Driving distance and Average speed are dis-
played as Trip 1 information or Trip 2 information.
●
The way to reset is by pressing the “Reset” switch or by keeping
pressing “TRIP” button more than 1.5 seconds.
FUEL ECONOMY
●
Average Fuel Economy, Distance to Empty, Fuel Economy are
displayed as Fuel Economy information.
●
The way to reset is by pressing the “Reset” switch or by keeping
pressing “TRIP” button more than 1.5 seconds.
Display items
Display/Setting contents
Reference
page
Trip 1 or Trip 2
Elapsed Time
Displays driving time with a range of 0000:00:00 to
9999:59:59.
Driving Distance
[(miles) or (km)]
Displays driving distance with a range of 00000.0 to
99999.9.
Average speed
[(MPH) or (km/h)]
Displays average speed with a range of 000.0 to 999.9.
Fuel Economy
Average Fuel Economy
[(MPG) or (l/100km)]
Displays fuel economy with ignition switch ON, average
fuel economy each 30 minutes.
Distance to Empty
[(miles) or (km)]
Displays possible driving distance with remaining fuel.
Fuel Economy
[(MPG) or (l/100km)]
Displays fuel economy each approx. 100 ms.
Maintenance
Engine oil
Maintenance intervals of engine oil and setting of oil
change cycle.
Tire rotation
Maintenance intervals of tire and setting of tire replace-
ment cycle.
Tire pressure
Tire pressure displayed as tire pressure information.
SKIA4526E
SKIA4527E
AV-120
NAVIGATION SYSTEM
Revision: 2005 August
2005 Murano
MAINTENANCE
●
Engine Oil, Tire Rotation and Tire pressure are displayed as
Maintenance information.
NOTE:
In a case of a vehicle with Low tire pressure warning control unit,
“Tire Pressure” switch is displayed.
ENGINE OIL OR TIRE ROTATION
●
Possible to set up interval of engine oil and tire rotation by mov-
ing joystick right and left.
TIRE PRESSURE
●
Pressure indication in
psi on the screen indicates that the
pressure is being measured. After a few driving trips, the pres-
sures for all four tires will be displayed.
●
The order of tire pressure figures displayed on the screen does
not correspond with the actual order of the tire position.
●
Tire pressure rises and falls depending on the heat caused by
the vehicle's traveling condition and the temperature.
●
In case of low tire pressure, the low tire pressure warning light
will come on and/or a warning is displayed on the screen.
●
FLAT TIRE–very low tire air pressure.
NOTE:
●
In a case of FLAT TIRE pressure, interrupt screen is not shown on the display.
●
On the screen of TIRE PRESSURE, “FLAT TIRE”, “Check”, “All tire” is displayed.
SKIA4528E
SKIA4650E
SKIA4651E
NAVIGATION SYSTEM
AV-121
C
D
E
F
G
H
I
J
L
M
A
B
AV
Revision: 2005 August
2005 Murano
WARNING INDICATIONS
Warning signal (Door switch signal) is received from BCM through
CAN communication line.
REAR VIEW SCREEN
When A/T selector lever is in R position, rear view image is dis-
played on the display.
Image Quality Adjustment
●
When pressing “SETTING” switch at rear view image, image
quality can be adjusted.
●
The image quality of the rear view image and the image quality
of the RGB screen can be separately set. And then, it can be
separately set when lighting switch is ON or OFF.
CAN Communication System Description
AKS007PX
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Modern
vehicles are equipped with many electronic control units and each control unit shares information and links
with other control units during operation (not independent). In CAN communication, control units are con-
nected with 2 communication lines (CAN H line, CAN L line) allowing a high rate of information transmission
with less wiring. Each control unit transmits/receives data but selectively reads required data only.
CAN Communication Unit
AKS007PY
Refer to
LAN-29, "CAN Communication Unit"
SKIA5609E
Warning indicators
Warning lamps in
instrument panel
Warning detection and cancel conditions
Cases of malfunction
DOOR OPEN
Door
Detection condition
Vehicle is running [approx. 5 km/h
(3 MPH) or faster] and door ajar of
any of the doors is detected.
Door is open
Cancel condition
Vehicle is stopped and all the
doors lock.
SKIB3094E
SKIB3095E
AV-122
NAVIGATION SYSTEM
Revision: 2005 August
2005 Murano
Component Parts and Harness Connector Location
AKS004R6
SKIB2700E
NAVIGATION SYSTEM
AV-123
C
D
E
F
G
H
I
J
L
M
A
B
AV
Revision: 2005 August
2005 Murano
Schematic — NAVI —
AKS004R8
TKWB0518E
AV-124
NAVIGATION SYSTEM
Revision: 2005 August
2005 Murano
TKWB0905E
NAVIGATION SYSTEM
AV-125
C
D
E
F
G
H
I
J
L
M
A
B
AV
Revision: 2005 August
2005 Murano
Wiring Diagram — NAVI —
AKS004R9
TKWB0906E
AV-126
NAVIGATION SYSTEM
Revision: 2005 August
2005 Murano
TKWB0519E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст