BYD L3. Service Manual — part 3
L3
Owner’s Manual
Keys and Doors 1-29
When pressing the brake or the clutch
pedal with force, the indicator on
“start/stop” switch will become green.
Press “start/stop” switch to start the
engine.
Press “start/stop” switch in a slow but
forceful way.
If the engine shuts off
Restart the engine in accordance with
correct starting procedure.
NOTICE
Do not touch the “start/stop” switch
with oil stained hands.
FRIENDLY TIPS
● If operating “start/stop” switch fails,
please stop using “start/stop” switch
and contact BYD authorized service
station immediately.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
L3
Owner’s Manual
Keys and Doors 1-30
If the engine fails to start
In the following cases, the engine will
not start.
● When pressing “start/stop” switch, if
the key position indicator lamp of the
smart key system is turned on,
buzzer in the car
rings and “key isn’t
detected” is shown on information
display on the right side of combined
meter, it indicates that the intelligent
key is not in the car.
● Even if the smart key is inside the
car (for example on the floor, in the
cup shelf, in the trunk or in the glove
box), the engine cannot be started.
Pressing “start/stop” switch does not
perform startup function normally,
possibly
due
to
the
following
reasons.
● If the smart key does not work, and
the key position indicator of the
smart key system on the combined
meter and the prompt message “key
battery voltage is low” is shown on
information display on the right side
of combined meter, the key battery
might have run out of power.
Draw the smart key up to “start/stop”
switch to start the engine. (Please
refer to “the smart entry and starting
system” for details.)
Please replace the smart key battery
as soon as possible. (Please refer to
“Replace the card smart key battery”
and “Replace the electronic smart
key battery” in this section.)
● The engine is started repeatedly in a
short period.
Start the engine 10 seconds later.
If startup fails, the orange indicator
on “start/stop” switch will blink.
● If the green indicator on “start/stop”
switch blinks, it indicates that the
steering function fails.
Please contact BYD service station
for examination of the car and all
keys.
Intelligent access and keyless startup
system cannot work normally in some
conditions other than above stated ones
due to application environment. (Please
refer t
o “the smart entry and starting
system” for details.)
Use the smart entry and starting
system to drive and park
-------------------------------------------------------------------------------------------------------------------------------------------------------------
L3
Owner’s Manual
Keys and Doors 1-31
Main Points on the Smart Entry and
Starting System
You can start the engine with your own
when using the smart entry and starting
system.
Due to this, the driver might not become
aware that someone else has taken the
key away from the car. In this situation,
the engine turned off cannot be started
again. Or the driver is not aware that
power position is not at OFF when he
left the car.
The driver should confirm whether he is
carrying the smart key when driving,
getting on car or getting off car.
NOTICE
Do not touch “start/stop” switch
while driving.
If it is necessary to turn off the engine in
emergency during driving, please hold
“start/stop” switch for more than 3
seconds.
Key position indicator lamp of the
smart key system
System Function Prompter
In the case of the following warning,
please follow corresponding description:
1.1
When pressing “start/stop”
switch to power up, instrument
warning buzzer beeps once
and “key isn’t detected” is
shown on information display
on the right side of instrument.
It indicates that the driver doesn’t carry
the smart key into the car. Key position
indicator lamp of the smart key system
on the instrument panel remains on for
up to 8 seconds while “key isn’t
detected” is shown on information
display is shown on information display
Do not operate “start/stop” switch until
you confirm that the smart key is inside
the car.
1.2
When pressing “start/stop”
switch to power off, instrument
set warning buzzer beeps once
and warning light blinks while
“key battery voltage is low” is
shown on the Information
Display on the Right Side of
instrument.
It indicates low level of the smart key
battery. Please replace the smart key
battery earlier to ensure normal work of
the smart entry and starting system.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
L3
Owner’s Manual
Keys and Doors 1-32
1.3
When pressing “start/stop”
switch to power up, the green
indicator lamp of “start/stop”
switch blinks.
It indicates that the steering lock is stuck.
To unlock it, please slightly sway the
steering
wheel
while
pressing
“start/stop”.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
L3
Owner’s Manual
Seats, Seat Belts, Steering Wheels, the Child Seat and Rearview Mirrors 1-33
Chapter 1
Section 3
Operation of Instruments and Controllers
Seats, Seat Belts, Steering Wheels, the Child Seat and
Rearview Mirrors
Seat . . . . . . . . . . . . . . . . . . . . . . ... 1-34
The Front Seat . . . . . . . . . . . . . . . . . . ... 1-34
Seat Belt . . . . . . . . . . . . . . . . . . . . . 1-35
The Children Seat . . . . . . . . . . . . . . . . . .. 1-40
Airbag Restraint System . . . . . . . . . . . . . . . 1-48
Steering Wheel . . . . . . . . . . . . . . . . . . . 1-58
Power-Driven External Rearview Mirror . . . . . . . . ... 1-59
Internal Rearview Mirror . . . . . . . . . . . . . . ... 1-60
Sunroof . . . . . . . . . . . . . . . . . . . . . .. 1-61
-------------------------------------------------------------------------------------------------------------------------------------------------------------
L3
Owner’s Manual
Seats, Seat Belts, Steering Wheels, the Child Seat and Rearview Mirrors 1-34
Seat
During driving, all passengers in the car
should make the seatbacks be in an
upright position. They should sit upright
against the seatbacks and fasten the
seat belts properly.
FRIENDLY TIPS
● Do not move the car before
passengers sit in place. Do not sit
on the upper side of folded seat
back, among luggage or on stuff.
Otherwise, passengers who are not
sitting in place or wearing seat belt
might be injured severely In the
case of emergency braking or
bumping.
● Passengers should not stand up or
move
between
seats
during
driving. Otherwise, they might be
injured severely In the case of
emergency braking or bumping.
The Front Seat
Notes on Seat adjustment
Please adjust the driver seat to put
pedal,
steering
wheel
and
the
instrument panel controller under control
of the driver.
FRIENDLY TIPS
● Do not make adjustment during
driving, as seat movement might
cause the car out of control of the
driver.
● When adjusting the seat, be sure
not to damage any passenger or
luggage.
● After adjusting the seat, please try
to slide it back and forth to confirm
the seat is locked in place.
● After adjusting seat back, please
lean
your
back
backward
to
confirm that the seat back is locked
in place.
● Do not place anything under the
seat. Otherwise, it might affect seat
locking mechanism or accidentally
push the seat position lever
upward and cause a sudden move
so that the driver might lose
control of the car.
● When adjusting the seat, do not put
your hand under the seat or near
any parts in operation to avoid
injury of your hand or finger.
Adjusting the Front Seat
1. Front and back adjustment rod
Hold the middle part of the rod and
pull it upward. Then, slide the seat to
desired position by using body
pressure and release the lever.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
L3
Owner’s Manual
Seats, Seat Belts, Steering Wheels, the Child Seat and Rearview Mirrors 1-35
2.
Hand
wheel
of
cushion
adjustment
Rotate the cushion adjustment hand
wheel to adjust the seat to a desired
height.
(Notes:
adjustment
mechanism is not available for
practical type, standard type and
co-driver seat)
3. Adjustment rod of seat back angle
Tilt the rod forward and pull it upward,
then tilt it backward to a desired
angle and release the lever.
4. Headrest height adjustment button
Raising Headrest
Slide the headrest upward to an
appropriate height and release it.
Lowering Headrest
Hold the button A to lower the headrest
to an appropriate height and release it.
Removing Headrest
Holding the button A to raise the
headrest and remove it.
Resetting Headrest
Insert the headrest connecting rod into
the bush and keep the groove forward.
Hold the button A to lower the headrest
to an appropriate height and release it.
FRIENDLY TIPS
In order to reduce the risk that the
seat belt comes off in a bumping
accident, please avoid excessive
tilting of seat back. When the driver
and passengers sit straight with their
back against seat back, seat belt will
provide the maximum protection in
an accident of the front or back
bumping. If someone leans against
the seat in an oblique way, the seat
belt at the waist might slide down the
hip and inflict pressure on the
bosom. In the case of an accident of
the front bumping, excessive tilting
of a seat might increase injury risk.
Seat Belt
Notes on Seat Belt:
It is strongly recommended that the
driver and passengers should wear seat
belt at any time. Otherwise, it might
increase the risk of injury/ severe injury
in an accident.
As seat belt is designed for adults, only
those who have reached a certain age
can wear seat belt properly.
The children must sit on back seat and
wear seat belt properly for protection. In
accordance with accident statistics, it is
safer for the children to seat in a back
seat under proper protection than in a
front seat.
If a child has to sit in a front seat, he
(she) must wear seat belt properly. If
seat belt is not used properly, the air bag
-------------------------------------------------------------------------------------------------------------------------------------------------------------
L3
Owner’s Manual
Seats, Seat Belts, Steering Wheels, the Child Seat and Rearview Mirrors 1-36
system which rapidly in an accident
might cause injury or even death to a
child.
Whether in a front seat or a back seat,
do not have a child stand or kneel on it.
Emergency braking or bumping might
cause severe injury or death to an
unprotected the child. Do not have a
child sit on an adult’s thigh to avoid any
risk.
FRIENDLY TIPS
Passengers must seat in place and
wear seat belt properly during
driving.
Otherwise,
emergency
braking or bumping might cause
severe injury or death to them.
Please follow the description below
when using seat belt:
One seat belt can only be used by
one people at a time. It is prohibited
for two or more people (including the
children) to share one seat belt.
FRIENDLY TIPS
● After inserting the seat belt into the
buckle, please check whether the
seat belt is locked by the buckle
firmly and whether the seat belt is
twisted.
● Do not insert coin, paper clip or
other objects into the buckle to
ensure correct connection between
the seat belt and the buckle.
● If seat belt does not work normally,
please contact BYD sales service
station immediately. Before the
seat belt is repaired, do not use the
corresponding seat, as it cannot
protect the passenger who uses it.
Avoid excessive tilting of seat back.
When the seat back is in a
straight-up position, seat belt exerts
the maximum protection role. (Refer
to description of seat adjustment.)
Do not damage seat belt or its
hardware. Do not stick or clamp seat
belt between seats or in a door car.
Examine seat belt regularly. Examine
whether there is scratch, wearing or
loose parts. Replace damaged parts
if necessary. Do not remove or refit
the system.
Keep the seat belt clean and dry. If
cleaning is necessary, please use
neutral soap water or slightly warm
water. Never use bleacher, dye fluid
or grinding detergent, which might
severely
undermine
seat
belt.
(Please refer to “inside cleaning” in
the instruction.)
In the case of a severe crash
accident, please replace seat belt set
(including bolt). Even if the damage
condition is not obvious, it is
necessary to replace the whole set.
FRIENDLY TIPS
Seat belt is designed for adults and
does not fit the children’s body size.
It is recommended that a child should
sit in the back row.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
L3
Owner’s Manual
Seats, Seat Belts, Steering Wheels, the Child Seat and Rearview Mirrors 1-37
3. Point-type Seat Belt
Adjust the seat as desired and sit
straight up in the seat with your back
against seat back. When fastening
seat belt, pull out seat belt from the
retractor and insert it into the buckle.
After inserting it into the buckle, a click
will be heard.
The length of seat belt can be adjusted
automatically
in
accordance
with
passenger’s body size and seat
position.
In the case of emergency braking or
bumping, the retractor will lock the seat
belt. If you move your body forward very
quickly, the seat belt will also be locked.
Slow and steady body movement will
extend seat belt free movement.
If the seat belt cannot be pulled out from
the retractor, please fasten the seat belt
once and then release it. In this way, you
can pull out seat belt from the retractor
smoothly.
When the seat belt on the shoulder a
passenger in a back seat extends to the
full, retract it slightly to lock the seat belt
at the position. To release the seat belt
again, please retract it to the full and
then pull it out again.
FRIENDLY TIPS
● A waist seat belt fastened at a
higher a position or a loosened
seat belt might slide down your
waist to cause severe injury In the
case of bumping or other accident.
Please keep the waist seat belt
down as low as your hip.
● For safety sake, do not put the
shoulder seat belt under your arm.
Seat belt with height adjustment
device
Adjust the seat belt to a position suitable
for body size with the height adjustment
device.
Raise: Slide the height adjustment
device upward.
Lower: Press the adjustment button of
the height adjustment device and slide
the height adjustment device downward.
After completing adjustment, check
whether the height adjustment device is
locked in place.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
L3
Owner’s Manual
Seats, Seat Belts, Steering Wheels, the Child Seat and Rearview Mirrors 1-38
Adjusting the positions of the waist
and shoulder seat belts.
Please keep the waist seat belt as low
as your hip. Do not fasten it in the
position of your waist. Then pull the
shoulder part upward through the latch
board and adjust the seat belt to a
proper position.
To release seat belt, please release
button on the seat belt and the seat
belt will be retracted automatically.
If the seat belt cannot be retracted
properly, please pull it out and examine
whether there is a knot or a twist. Make
sure that there is no twist when
retracting the seat belt.
FRIENDLY TIPS
Please make sure that the shoulder
seat belt cross the middle of your
shoulder. Seat belt should be away
from your neck to an extent that it will
not come off from your shoulder.
Otherwise,
it
will
undermine
protection function of the seat belt In
the case of unexpected accident and
cause severe injury In the case of a
bumping accident.
2. Point-type Seat Belt
Please keep it down as low as your hip.
Sit straight in your seat with your
back against seat back. To buckle the
seat belt, please insert it into the
buckle.
After inserting it into the buckle, a click
will be heard.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
L3
Owner’s Manual
Seats, Seat Belts, Steering Wheels, the Child Seat and Rearview Mirrors 1-39
If the seat belt is not long enough,
please pull the belt head while
maintaining a right angle between the
belt head and the seat belt.
Retract the extra part of the seat belt
and adjust the seat belt position.
When retracting the seat belt, please
pull at the unfixed end of the seat belt.
Please keep the waist seat belt in a
position as low as your hip instead of
your waist, and then adjust the seat belt
to a proper position.
FRIENDLY TIPS
A waist seat belt fastened at a higher
a position or a loosened seat belt
might slide down your waist to cause
severe injury In the case of bumping
or other accident. Please keep the
waist seat belt down as low as your
hip.
FRIENDLY TIPS
● After inserting the seat belt into the
buckle, please check whether the
seat belt is locked by the buckle
firmly and whether the seat belt is
twisted.
● Do not insert coin, paper clip or
other objects into the buckle to
ensure correct connection between
the seat belt and the buckle.
● If seat belt does not work normally,
please contact BYD authorized
service station immediately. Before
repairing the seat belt, do not use
the corresponding seat. It cannot
provide
protection
for
the
passenger who uses it and might
cause injury.
To release the seat belt, please press
the releasing button on the buckle.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
L3
Owner’s Manual
Seats, Seat Belts, Steering Wheels, the Child Seat and Rearview Mirrors 1-40
The Children Seat
It is strongly recommended to use the
children protection device.
FRIENDLY TIPS
● According to a research, it is safer
to install a child protection device
on a back seat than on a front seat.
● Please select a child protection
device in accordance with age and
body size of your child.
● For related installation details,
please refer to the instruction
attached to the child protection
device.
The manual provides a common
installation instruction.
Type of the Child Protection Device
The child protection device falls into the
following 3 types in accordance with age
and body size of the children.
1. Baby Seat (infant seat)
2. The Child Seat (convertible seat)
3. Youth Seat (auxiliary seat)
Select a Suitable Child Protection
Device
Please select a suitable child protection
device. If your child cannot use a child
protection device due to large body size,
please use seat belt on the back seat.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
L3
Owner’s Manual
Seats, Seat Belts, Steering Wheels, the Child Seat and Rearview Mirrors 1-41
Notes on the child protection device
● Please use seat belt or the child
protection device in accordance with
age and body size of a child to
provide effective restriction and
protection in order to protect the
children In the case of emergent
accident
or
emergent
braking.
Embracing a child cannot substitute
a child protection device. In the case
of accident, a child might be bumped
onto shield glass or squeezed
between you and car body.
● Never install a back seat the child
protection device on the front seat.
Otherwise,
impacting
strength
caused by rapidly inflating air bag
might cause severe damage or
death to a child.
● Install a child protection device on a
front seat only when there is no other
choice. As air bag in the front of the
front seat might inflate in quite a
rapid speed and generates quite a
great impact, please move the seat
backward as much as possible to
avoid risk of the child injury or death.
● For a car equipped with a side airbag
or a curtain type air bag, even if you
have place a child in the child
protection device, do not let his (her)
head or any body part rest on the car
door, the seat, front/rear pole or side
roof beam (inflation range of side air
bag or curtain type air bag).
Otherwise, the strong impact of
inflating side air bag or curtain type
air bag might cause severe damage
or even death to a child.
● Be sure to follow installation
instruction provided by the child
protection device the manufacturer
to install the child protection device
correctly. Otherwise, it might cause
severe damage or even death to a
child In the case of emergency
braking or accident.
Installing the Child Protection Device
Please
follow
the
installation
instruction provided by the child
protection device the manufacturer.
Use the seat belt or the fastening belt
under the child protection device to
fix the child protection device to the
outside seat of the back row. Please
fix the top belt when installing the
child protection device.
Seat belt equipped with the child
protection device
(ALR/ELR seat belt on back row seat)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
L3
Owner’s Manual
Seats, Seat Belts, Steering Wheels, the Child Seat and Rearview Mirrors 1-42
ISOFIX rigid fixing anchor (ISOFIX the
child protection device)
A dedicated fixing lever is provided on
the outside seat in the back row. (The
tag indicating anchoring position is
attached to the seat.)
Fixing anchor support (used for top belt)
Fixed anchor support is provided on
outside seat of the back row.
The child protection device using
Seat belt (the child protection device
locking seat belt)
1. The child seat facing behind
— baby
seat
(infant
seat)/the
child
seat
(convertible seat)
Put the child seat on the back row seat
and face it to the back.
Pass the seat belt through the child seat
and insert the belt head into the buckle.
Ensure that the seat belt is not twisted.
2. The child seat facing forward
(convertible seat)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
L3
Owner’s Manual
Seats, Seat Belts, Steering Wheels, the Child Seat and Rearview Mirrors 1-43
Install the child seat on the seat and
make it face forward.
Pass the seat belt through the child seat
and insert the belt head into the buckle.
Ensure that the seat belt is not twisted.
Pull out the shoulder seat belt to the full
and then retract it slightly to enter ALR
locking mode.
It is not allowed to retract seat belt in
locking mode.
Place the child seat on the back row
seat closely and retract the shoulder
seat belt to the full until the child seat
belt is fixed in place.
Retract shoulder seat belt to the full and
then confirm that it cannot be pulled out
by trying to pull it.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
L3
Owner’s Manual
Seats, Seat Belts, Steering Wheels, the Child Seat and Rearview Mirrors 1-44
Youth Seat (auxiliary seat)
Install the child seat on the seat and
make it face forward.
The child should use the child seat. Fix
the child seat with seat belt and insert
the belt head into the buckle in
accordance with installation instruction
provided by the manufacturer. Ensure
that the seat belt is not twisted.
Check and confirm that the shoulder
seat belt crosses a child’s shoulder
properly and lower the waist seat belt as
much as possible.
Remove the child protection device fixed
with seat belt and press buckle releasing
button to retract the seat belt to the full.
Install the child protection device
with ISOFIX rigid fixing anchor
(ISOFIX the child protection device)
Check the position of dedicated fixing
lever and install the child protection
device to the seat.
Install fixing lever between cushion and
seat back.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст