BYD E6. Service Manual — part 2
BYD e6A AUTO Owner's Manual
Operation of Instruments and Controllers 1-5
EPS Malfunction Indicator
Power Battery Overheat Indicator *
Power Battery Charging Connective Indicator *
Power Battery Low Power Indicator *
READY Indicator *
Power Battery Fault Indicator
Motor Overheat Indicator *
Reversing radar information
Smart key, key position indicator
Front passenger airbag on and off indicator *
Sport mode indicator
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD e6A AUTO Owner's Manual
1-6 Operation of Instruments and Controllers
Speedometer
This meter will indicate the vehicle speed
while the power switch is on
Battery power meter
This meter will indicate the remaining power
of the power battery while the power switch is
on. The indication is symmetrical on both left
and right sides and changes simultaneously.
Tips
The power battery must be charged as
soon as possible when the indicator bar has
entered or is going to enter into the red
zone.
Power meter
The power meter indicated the power of the
vehicle in kw.
The power indication might be negative while
the vehicle is driving downhill or running on
inertia. That is a normal condition.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD e6A AUTO Owner's Manual
Operation of Instruments and Controllers 1-7
Odometer and Dual Trip Odometer
This screen displays the following
information.
a. Odometer - display the total mileage of the
car.
b. Dual Trip Odometer - display the different
mileages since the two trip odometers
were reset to zero respectively.
You can use one to calculate remaining
battery power (TRIP A) and use the other to
record the mileage of each trip (TRIP B).
c. Trip odometer reset button - reset the
reading of the dual trip odometer to zero;
rotate the display.
To rotate the display of the odometer, press
and then release the switch quickly. For each
press, the meter display will rotate from
odometer to Trip A, from Trip A to Trip B, or
from Trip B to odometer.
To reset a trip odometer to zero, first switch the
information displayed on the screen to the
desired reading (Trip A/Trip B), and then press
the button until it is reset to zero.
Remaining Mileage Meter
The remaining mileage is the driving distance
that can be supported by the remaining power,
which is calculated based on the remaining
power and the vehicle operating conditions.
Tips
Please charge the vehicle promptly when
the power indicator bar has dropped into
the red zone.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD e6A AUTO Owner's Manual
1-8 Operation of Instruments and Controllers
Service Reminder Indicators & Warning Buzzers
If an indicator comes on or the buzzer buzzes
What to do
(a)
If the parking brake is not applied, please stop the car immediately and contact a BYD
authorized service station.
(b)
(Indicator and buzzer)
Fasten the driver's safety belt.
(c)
Send the car to a specified service station. Please contact a BYD authorized service
station.
(d)
Send the car to a specified service station. If the braking system warning light also
illuminates, please contact a BYD authorized service station.
(e)
Close all doors.
(f)
Contact a BYD authorized service station.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD e6A AUTO Owner's Manual
Operation of Instruments and Controllers 1-9
If an indicator comes on or the buzzer buzzes
What to do
(g)
Please drive the car to a specified service station, and park the car to let the power motor
cool down. Please contact BYD staff in event of frequent occurrence.
(h)
Please drive the car to a specified service station; Please contact BYD staff for inspection.
(i)
Please drive the car to a specified service station if such a fault is detected; check whether
the coolant is sufficient and park the car to let the power motor cool down. Please contact
BYD staff in event of frequent occurrence.
(j)
Please drive the car to a specified service station; please contact BYD staff.
(k)
Please send the car to a specified service station; please contact BYD staff.
(l)
Please drive the car to a specified service station; Please contact BYD staff for inspection.
(m)
The power battery must be charged.
(n)
The vehicle is ready to drive; pay attention to the surrounding conditions.
(o)
Turn on the airbag for the front passenger seat if that seat is occupied by an adult.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD e6A AUTO Owner's Manual
1-10 Operation of Instruments and Controllers
(a) Braking system Warning Light
This light will come on in the following
conditions when the power switch is at "ON"
position.
● When the brake fluid level is low.
● When the parking brake is applied.
● When there is a fault with the vacuum
pressure.
● When there is an EBD fault.
● When the brake fluid level is low.
Tips
It is very dangerous to continue to drive
while the brake fluid level is low.
Please have the vehicle inspected by a BYD
authorized service station in the following
conditions:
● When the power position is "ON", this light
does not come on even if the parking
brake is applied.
● When the parking brake is released, this
light keeps turning on even if the power
position is switched to "ON.
The instantaneous flashing of the warning
light during operation is a normal condition.
(b) Seat Belt Indicator
This indicator light will remind the driver to
fasten the seat belt.
When the ignition key is turned to "ON"
position, this indicator light will come on if the
driver's seat belt is not fastened. The light will
remain on unless the driver's seat belt is
fastened.
(c) DC fault warning light
The function of this light is to warn of the
operating condition of the DC module.
If this light comes on while driving, it suggests
that there is problem with the DC system.
Turn off the A/C system, fan and radio, etc.
Drive the vehicle to the nearest BYD service
station for repair.
Tips
Please park the vehicle in the safe place
immediately and contact a BYD service
station if any of the following conditions
occur.
● When the power position is ON, this
light does not go off even if the parking
brake is released.
That might indicate that the brake does
not work properly and the braking
distance will be extended. Step on the
brake pedal with force to stop the vehicle.
● The braking system warning light
remains on while the ABS warning light
comes on.
The anti-lock braking system will not
work when braking and the vehicle will
also become extremely unstable in such
a condition.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD e6A AUTO Owner's Manual
Operation of Instruments and Controllers 1-11
(d) "ABS" warning light
This light will come on when the power
position is switched "ON". It will go out in a
few seconds if the ABS system is working
properly. This light will come on again if there
is a fault with the system.
When the "ABS" warning light comes on (and
the braking system warning light is off), the
ABS system will not work but the braking
system will still work normally.
When the "ABS" warning light comes on (and
the braking system warning light is off), the
wheels will lock in event of emergency
braking or braking on a slippery road because
the ABS system will not work.
If any of the following conditions occur, it
suggests that there is a fault with the
components monitored by the warning
indicator system. Please contact a BYD
service station for an inspection of the vehicle:
● This light does not come on or remains on
when the power is switched to "ON"
position.
● This light comes on while driving.
The instantaneous flashing of the warning
light during operation is a normal condition.
Tips
If the "ABS" warning light is still on when the
braking system warning light comes on,
please park the vehicle in a safe place
immediately and contact a BYD service
station.
The anti-lock braking system will not work
when braking and the vehicle will also
become extremely unstable in such a
condition.
(e) Door ajar warning light
This light will remain on until all the doors are
closed properly.
(f) SRS Warning Indicator*
This light will come on when the power is
switched to "ON" position. It will go off in
approximately 5 seconds, which indicates
that the airbag system is working properly.
The warning indicator system monitors the
airbag ECU, collision sensor, air inflation
device, wiring and power supply.
If any of the following conditions occur, it
suggests that there is a fault with the
components monitored by the warning
indicator system. Please contact a BYD
service station for an inspection of the
vehicle:
● This light does not come on or remains on
when the power is switched to "ON"
position.
● This light comes on or flashes while driving.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD e6A AUTO Owner's Manual
1-12 Operation of Instruments and Controllers
(g) Motor Coolant Overheat
Indicator
When this light comes on, it means that the
motor coolant temperature is too high. The
vehicle must be stopped to let the motor cool
down.
The motor may get overheated in the
following operating conditions:
● Driving uphill for a long distance in hot
whether.
● Frequent sudden braking and harsh
acceleration.
● When the vehicle is used to tow another
one.
(h) Power System Malfunction
Indicator
This light will come on when the power
position is switched "ON". It will distinguish in
a few seconds if the power system works
properly. This light will come on again if there
a fault with the system afterwards.
If any of the following conditions occur, it
suggests that there is a fault with the
components monitored by the warning
indicator system. Please contact a BYD
service station for an inspection of the
vehicle:
● This light does not come on or remains on
when the power is switched to "ON" position.
● This light comes on while driving.
The instantaneous flashing of the warning
light during operation is a normal condition.
NOTE
Do not drive the vehicle while the warning
indicator is on - even for a short distance.
Otherwise the motor could be damaged.
(i) Motor Overheat Warning
Indicator
When this light comes on, it means that the
motor temperature is too high. The vehicle
must be stopped to let the motor cool down.
The motor may get overheated in the
following operating conditions:
● Driving uphill for a long distance in hot
whether.
● The vehicle stops and starts frequently in
jammed traffic; frequent harsh
acceleration and sudden braking; or the
vehicle keeps running for a long time
without a break.
● When the car is used to tow another one.
(j) EPS Malfunction Indicator
This light will come on when the power
position is switched "ON". It will go out in a
few seconds if the EPS system works
properly. This light will come on if there a fault
with the system.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD e6A AUTO Owner's Manual
Operation of Instruments and Controllers 1-13
If any of the following conditions occur, it
suggests that there is a fault with the
components monitored by the warning
indicator system. Please contact a BYD
service station for an inspection of the
vehicle:
● This light does not come on or remains on
when the power is switched to "ON" position.
● This light comes on while driving.
The instantaneous flashing of the warning
light during operation is a normal condition.
Tips
Please park the vehicle in a safe place
immediately and contact a BYD service
station if the following conditions occur.
● This light does not come on or remains
on when the power is switched to "ON"
position.
That means that the EPS system may
not work properly; please park the
vehicle in a safe place immediately.
● This light comes on while driving.
(k) Power Battery Fault Indicator
If this indicator comes on, it suggests that
there is a fault with the power battery. Please
contact a BYD service station as soon as
possible for an inspection of the vehicle.
(l) Power Battery Overheat
Indicator
When this light comes on, it means that the
power battery temperature is too high. The
vehicle must be stopped to let the battery cool
down.
The power battery may overheat in the
following operating conditions:
● Driving uphill for a long distance in hot
whether.
● The vehicle stops and starts frequently in
heavy traffic; frequent harsh acceleration
and sudden braking; or the vehicle keeps
running for a long time without a break.
● When the vehicle is used to tow another one.
(m) Power Battery Charging
Connection Status Indicator
This light will come on when the power
battery is nearly out of power. The power
battery must be charged as soon as possible.
(n) READY Indicator
This light indicates that all the vehicle
systems are in a proper condition and the
vehicle is ready to go.
(o) Front passenger airbag on
and off indicator
If this indicator comes on, it means that the
airbag system at the front passenger seat is
in the off status.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD e6A AUTO Owner's Manual
1-14 Operation of Instruments and Controllers
Tips
● Please turn on the airbag system for the
front passenger seat when that seat is
occupied by an adult to ensure the
safety of the passenger.
● Please turn off the airbag system for the
front passenger seat when that seat is
occupied by a child to ensure the safety
of the passenger, because inflation of
the airbag might cause injury to the
child.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD e6A AUTO Owner's Manual
Doors and Keys 1-15
Chapter 1
Section 2
Doors and Keys
Keys . . . . . . . . . . . . . . . . . .. 1-16
Intelligent Access and Starting System . . . . 1-22
Front Doors. . . . . . . . . . . . . . ... 1-26
Trunk lid . . . . . . . . . . . . . . . . 1-27
Charger socket cover . . . . . . . . . . ... 1-28
Front motor compartment cover . . . . . . ... 1-28
Power windows . . . . . . . . . . . . . . 1-33
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD e6A AUTO Owner's Manual
1-16 Doors and Keys
Keys
Intelligent Keys and Mechanical Keys
1. Intelligent Key - used to open/lock all doors
and available in two types: electronic
intelligent key and card-type intelligent key.
Electronic intelligent key can be used to
open/lock doors, make an emergency
alarm and search for the car at a distance.
2. Mechanical key (in electronic intelligent key
and car-type intelligent key) - is used to
open/lock doors and trunk.
WARNING
● People with heart pacemakers and
defibrillators must be kept away from the
antenna of intelligent access and starting
system, as the electromagnetic wave
may affect normal use of these devices.
For information on the position of the
antenna, please refer to "Antenna
Position" in this section.
● Drivers with heart pacemakers and
defibrillators and people using other
medical electronic devices must ask
manufacturer about the dangers of
interference to these device posed by
electromagnetic waves. Electromagnetic
wave may cause unexpected results to
these devices.
NOTE
Pay attention to the following items when
using intelligent keys:
Do not attach any object which may
block electromagnetic waves (such as
a metal container) to the key.
Do not knock the key forcibly on other
projects.
Do not place the intelligent key in high
temperature, direct sunlight or on
motor hood for a long time.
Do not clean the key in water or an
ultrasonic washer.
Do not put the intelligent key near any
device which may produce
electromagnetic wave, such as a cell
phone.
Using the Mechanical Key inside the
Electronic Intelligent Key
To use mechanical key in electronic intelligent
key, pull down the switch to release the key as
shown in the figure. Make sure to put back the
mechanical key after use.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD e6A AUTO Owner's Manual
Doors and Keys 1-17
Using the Mechanical Key inside the
Card-type Intelligent Key
To use mechanical key in card-type intelligent
key, pull out the key as shown in the figure.
Make sure to put back the mechanical key
after use.
Key Number Plate
The key number is indicated on the number
plate, which must be kept separately in a safe
place other than in the vehicle.
If the key is lost or you need to make a spare
key, the BYD authorized service station can
reproduce a key according to the key number.
It is recommended to take note of the key
number and keep it at a safe place.
Wireless Remote Control
Electronic Intelligent Key
1. Lock UP Switch
2. Unlock Switch
3. Remote trunk lid switch
4. Mechanical key
5. Indicator
Wireless remote control system is designed to
open/lock all side doors at a distance of some
1 m from the car together with some additional
functions. It is available only on electronic
intelligent key.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD e6A AUTO Owner's Manual
1-18 Doors and Keys
When operating, please press the switch
slowly and firmly.
Electronic intelligent key includes electronic
components. Please follow the following
instructions to avoid any damage to the key.
Do not place the key in high
temperature, such as on the instrument
panel.
Do not disassemble it.
Do not knock the key forcibly and drop it
to ground.
Do not submerge the key in water.
You can register spare keys for the car. For
more detailed information, please contact a
BYD authorized service station.
If the electronic key cannot function well in
normal operation range, or when the indicator
on the key is dim or off:
Check whether there is radio station or
transmitter nearby which may interfere
with the key.
Battery may have depleted. Check the
battery in the key. To replace the
battery, please see "Replace Battery of
Electronic Intelligent Key".
If you lose the electronic intelligent key,
please contact a BYD authorized
service station as soon as possible to
prevent the car from being stolen.
Locking Operation
Unlocking Operation
When locking/unlocking, press down the
switch on the key slowly and firmly.
Lock: press down locking switch to lock all
doors. The turn signal lights will flash once.
Check whether all doors have been locked up
firmly.
If any door is still open, use lock-up switch to
unlock all door locks. When unlocking, the turn
signal lights will not flash but the warning
buzzer beeps once.
Unlock: press down unlocking switch to unlock
all doors. The turn signal lights will flash twice.
Locking
Unlocking
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD e6A AUTO Owner's Manual
Doors and Keys 1-19
If power supply is at ACC or ON, the doors
cannot be opened/locked by the key.
When unlocking all doors with electronic
intelligent key, even if the doors are not opened,
the interior lights will be turned on and remain
on for 15 seconds before going out.
When using electronic intelligent key to unlock
doors, please pull open a door manually in 30
seconds. Otherwise all doors will be locked up
automatically.
If you press and hold the locking/unlocking
switch, the key will not function repeatedly.
You must release the switch first for repeated
operation.
Finding Car Operation
When the car is under anti-theft state, press
down locking switch and the car will give out a
long sound with the turning signal lights
flashing for 15 seconds. When you can not
find your car, this function is useful to locate it.
Under searching state, press the locking
switch again to enter into the search state for
the second time.
Replace Card-type Intelligent Key Battery
The replacement of battery for the card-type
key is simple and you can do it yourself. You
must use CR2025 lithium battery or equivalent
for replacement.
WARNING
Pay close attention to prevent the battery
from being swallowed by children.
NOTE
Only use batteries recommended by
BYD service station or their
equivalent for replacement.
Dispose of depleted batteries
according to local laws.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD e6A AUTO Owner's Manual
1-20 Doors and Keys
Replace the battery for the card-type
intelligent key in the following steps.
a. Pull out the mechanical key in the arrow
direction.
b. Take out battery.
c. Insert the new battery into the intelligent key,
and then put back the mechanical key into
the card-type intelligent key.
NOTE
Make sure that the battery poles are
installed properly.
Do not operate the battery with wet
hands, which may cause rusting.
The card-type key is not waterproof; do
not let water enter it.
After battery replacement, check whether the
card-type intelligent key can work normally. If
it still cannot work, please contact a BYD
authorized service station.
NOTE
Do not alter the emission frequency,
increase the emission power
(including but not limited to adding
emission frequency amplifiers), equip
with an external antenna or use other
emission antennas without
permission.
Use of the electronic intelligent key
should not produce any harmful
interference to any legal wireless
communication services; stop use of
it immediately if any interference is
found and do not use it until the
interference has been eliminated.
When using a micropower radio
device, there might be interference
from radio services and radiation
interference from industrial, scientific
and medical devices.
Do not use the electronic intelligent
key on board aircraft or at airports.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст