Dongfeng DFA1101GZ5AD6J-907. Manual — part 55
Cab
BF-3
Door
Front Door
When disassembling the front door, it is better to disassemble the cover at front side first.
Afler adjusting the door or door lock, check the door lock open and lock condit ion
.
Cab
BF-4
Instrument Panel
Caution:
Before disassembling the instrument panel, switch off the power-supply.
Be careful not to scratch pad and other parts.
These parts are made of plactic. Excessive force will damage them.
The structune of the instrument panel in shown as below:
•
Cab Internal Trims and External Trims
Internal trims
Side ard floor trims-Passenger area
Caution:
Wrap the tip of flat-bladed screwdriver with a cloth when removing metal clips from garnishes.
Disassembly of the side inner trims:
①
Disassemble the sun visor.
②
Disassemble the rearview mirror.
1.Instrument frame welding ass'y.
2.Oil can cap
3.Instrument frame welding ass'y.
4.Instrument panel upper cover ass'y.
5.Ashtray assy.
6.Block cover, Small glove box ass'y.
7.Block cover, warm air control
8.Lower trim grille ass'y.
9.Glove box cover
10.Glove box ass'y.
Cab
BF-5
③
Disassemble the roof lamp ass'y.
④
Disassemble the handrail.
⑤
Disassemble the seats.
⑥
Disassemble the safely belt.
⑦
Disassemble the door guardrail.
⑧
Disassemble the rear window glass.
Door trims
Disassembly of the door trims:
①
Disassemble lock knob.
②
Disassemble inside seal.
③
Disassemble inside handle escutcheon rear door).
④
Disassemble pull handle.
⑤
Pull out regulator handle.
Cab
BF-6
⑥
Disassemble inner guard board of door (front door).
⑦
Disassemble inner guard board of door (rear door)
.
Roof trims
Disassembly of the roof trims
Single seater cab
①
Remove part of headlining from corner and gradually peel headlining off.
Double seater cab
①
Disassemble the screw and roof bow.
②
Remove headlining by peeling if off, starting with middle portion
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст