DongFeng RICH. Service Manual — part 2
Contents
Heater, air conditioner and audio system
Pre-driving checks and adjustments
Starting and driving
In case of emergency
Appearance and interior care
Maintenance and Do-it-yourself
Instruments and controls
3
2
4
5
6
7
1
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Technical information
Mainternance schedule
Index
8
9
10
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls 1-1
1. INSTRUMENTS AND CONTROLS
INSTRUMENT PANEL . . . . . . . . 1-2
METERS AND GAUGES . . . . . . . 1-3
SPEEDOMETER AND ODOMETER . . .. 1-4
TACHOMETER . . . . . . . . . . ... 1-4
ENGINE COOLANT TEMPERATURE GAUGE
. . . . . . . . . . . . . . . . . . 1-5
FUEL GAUGE . . . . . . . . . . . . 1-5
WARNING/IDICATOR LIGHTS AND AUDIBLE
REMINDERS . . . . . . . . . . . ... 1-6
SWITCH . . . . . . . . . . . . . 1-10
HEAD LIGHT, DIMMER AND TURN SIGHAL
SWITCH . . . . . . . . . . . . . . 1-11
HAZARD WARNING FLASHER SWITCH 1-12
CIGARETTE LIGHTER AND ASH TRAYS 1-13
POWER WINDOW . . . . . . . . . 1-13
INTERIOR LIGHT . . . . . . . . . .. 1-14
INSPECTION LIGHT (IF SO EQUIPPED) 1-15
REAR
FOG
LIGHT
SWITCH
(IF
SO
EQUIPPED) . Error! Bookmark not defined.
OBD(IF SO EQUIPPED) . . . . . . ... 1-16
-------------------------------------------------------------------------------------------------------------------------------------------------------------
1-2 Instruments and controls
INSTRUMENT PANEL
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls 1-3
METERS AND GAUGES
1. Fuel gauge
2.
speedometer
3.
turn signal/warning/indicator light
4.
tachometer
5.
engine coolant temperature
gauge
6.
warning/indicator light
7.
odometer/meter odometer
8.
reset knob
9.
AT shift indicator
(automatic
transmission models
)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
1-4 Instruments and controls
SPEEDOMETER AND
ODOMETER
The
speedometer
indicates
vehicle speed.
Odometer/twin trip odometer
The odometer records the total
distance the vehicle has been
driven.
The trip odometer records the
distance of individual trips.
Changing the display
Push the reset knob to change
the display as follows:
ODO→TRIP A→TRIP B→ODO
Resetting the trip odometer
Push the reset knob for more
than 1 second to reset the trip
odometer to zero.
TACHOMETER
The tachometer indicates engine
speed
in
revolutions
per
minute(r/min).
Caution
When
engine
speed
approaches the red zone, shift
to a higher gear. Operating the
engine in the red zone may
cause serious engine damage.
Red zone
Don’t run engine into red zone
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls 1-5
ENGINE COOLANT
TEMPERATURE GAUGE
The gauge indicates the engine
coolant temperature.
The engine coolant temperature
will vary with the outside air
temperature
and
driving
conditions.
Caution
When towing a trailer or
driving uphill, if the needle
nears the hot end of the
normal range, reduce the
vehicle speed as soon as
safely possible to decrease
the
engine
coolant
temperature.
It
is
recommended to use the 2nd
gears under speeds of 15
km/h ,use the 3rd gears under
speeds
of
30
km/h
respectively.
●
If the gauge indicates over
the normal range, stop the
vehicle as soon as safely
possible.
●
If the engine is overheated,
continued operation of the
vehicle may seriously damage
the engine. See “In case of
emergency”
section
for
immediate action required.
Warning
Allow the engine to cool
before removing the radiator
cap to avoid the danger of
being scaled.
FUEL GAUGE
The
gauge
indicates
the
APPROXIMATE fuel level in the
tank.
The gauge may move slightly
during
braking,
turning,
acceleration, or going up or
down hill.
The gauge needle is designed to
remain in approximately the
same position, even when the
ignition key is turned “OFF”.
Caution
Refill the fuel tank before the
gauge registers empty.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
1-6 Instruments and controls
WARNING/IDICATOR LIGHTS AND AUDIBLE REMINDERS
Turn shgnal/hazard indicator lights
Rear fog light indicator light (If so
equipped)
Charge warning light
Brake warning light
Oil pressure warning light
Fault Indicator light
Fuel warning light
High beam indicator light (blue)
Air bag warning light
Anti-lock brake warning light
(if so
equipped
)
4-wheel
drive
indicator
light
(4×4model)
Seat belt warning lights
Alarm lamp door open
Engine fault alarm lamp
Overspeed alarm lamp
Checking the alarm lamp
Apply the parking brake and turn
the
ignition key to “ON” without
starting the engine. The following
lights will come on:
,
,
,
.
If any light fails to come on, it
may indicate a burned-out or an
open circuit in the electrical
system.
Have
the
system
repaired promptly.
Turn signal/hazard
indicator lights
The light flashes when the turn
signal switch lever or hazard
switch is turned on.
Brake warning light
This light functions for both the
parking brake and the foot brake
systems.
Parking brake indicator
The light comes on when the
parking brake is applied.
The light warns of a low brake
fluid level.
If the light comes on while the
engine is running, stop the
vehicle
and
perform
the
following:
Check the brake fluid level. Add
brake fluid as necessary. See
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls 1-7
“Brake and clutch fluid” in the
“Do-it-yourself
operations”
section.
Warning
If the level is blow the
MINMUM mark on the brake
fluid reservoir, do not drive
until the brake system has
been checked at a Zhengzhou
NISSAN dealer.
If the brake fluid level is correct:
Let Zhengzhou NISSAN dealer
check the warning system.
Warning
●
Although you judge it to be
safe, towed it, for driving it
could be dangerous.
●
Press the brake pedal with
the engine stopped and / or
low brake fluid level could
increase
your
stopping
distance and require greater
pedal effort as well as pedal
travel.
Fuel warning light
This light comes on when the
fuel tank is almost empty. Refuel
at the nearest gas station.
Rear fog light indicator
light (If so equipped)
The light comes on when the
rear fog light switch is turned on.
Oil pressure warning
light
This light warns of low engine oil
pressure. If the light flickers or
comes on during normal driving,
pull off the road in a safe area,
stop the engine immediately and
call
a
Zhengzhou
NISSAN
dealer or other authorized repair
shop. Running the engine with
the oil pressure warning light on
could causes serious damage to
the engine.
The oil pressure warning light is
not designed to indicate a low oil
level. Use the dipstick to check
the oil level. See “Engine oil” in
the
“Maintenance
and
do-it-
yourself” section.
Charge warning light
If the light comes on while the
engine is running, it may indicate
the charging system is not
functioning properly. Turn the
engine
off
and
check
the
alternator belt. If the belt is
loose, broken, missing or if the
light remains on, see your
Zhengzhou
NISSAN
dealer
immediately.
Caution
Do not continue driving if the
belt
is
loose,
broken
or
missing.
Air bag warning light(if
so equipped)
After turning the ignition key to
the ON position, the air bag
warning light will illuminate. The
air bag warning light will turn off
-------------------------------------------------------------------------------------------------------------------------------------------------------------
1-8 Instruments and controls
after about 7 seconds if the
system is operational.
If any of the following conditions
occur,
the
air
bag
(and
pre-tensioner seat belt, in the
case of needs servicing and
the vehicle must be taken to your
nearest authorized Zhengzhou
NISSAN dealer.
The
air
bag warning light
remains on after approximately 7
seconds.
The air bag warning light flashes
intermittently.
The air bag warning light does
not come on at all.
Unless checked and repaired,
the
supplemental
restraint
system (and/or the pre-tensioner
seat belt) may not function
properly. For additional details
on the Air Bag System, see the
“Pre-driving
checks
and
adjustments” section.
High beam indicator
light (Blue)
This light comes on when the
headlight high beam is on, and
goes out when the low beams
are selected.
Fault Indicator light
This light functions for the
engine
control
malfunction
indicator.
Malfunction
indicator
light
function for engine control:
If this light comes on while the
engine is running, it may indicate
a
potential
engine
control
malfunction. Although the vehicle
is still driveable, see your
Zhengzhou NISSAN dealer for
service as soon as possible. You
do not need to have your vehicle
towed to the dealer. Continued
operation without having the
engine control system checked
and repaired as necessary could
lead to poor driveability, reduced
fuel economy, and possible
damage to the engine control
system.
Incorrect setting of the engine
control system may lead to
non-compliance of local and
national emission laws and
regulations.
Anti-lock brake warning
light
After turning the ignition key to
the ON position, the light will
illuminate. The anti-lock brake
warning light will turn off after
about 1.7 second if the system is
operational.
If the light comes on while the
engine is running, it may indicate
the anti-lock brake system is not
functioning properly. Have the
system checked by your dealer.
However if the light illuminates
while starting the engine, it does
not
indicate
a
system
malfunction.
If an abnormality occurs in the
system, the anti-lock function will
cease but the ordinary brakes
will continue to operate normally.
●
If the light comes on while
you are driving, contact your
dealer for repair.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls 1-9
4-wheel drive indicator
light
This light comes on when the
transfer shift control switch is in
the “4H” or “4L” position.
For the ELEC. Transfer vehicles,
w
hen the switch is in the “4H”
position, green indicator light
comes on; when the switch is in
“4L” position, yellow indicator
light comes on (For more details,
see Character 4). If the light
remains on when shifting from
“4H” to “2H”, the 2-wheel drive is
not selected.
Ensure
safety
and
either
accelerate, decelerate or back
up the vehicle to change to
2-wheel drive.
Seat belt warning lights
Warning light is used to remind
you to fasten your seat belt.
Whenever the ignition key is
located in the "ON",the Light will
being on until the driver wearing
a seat belt.
Alarm lamp door open
Warning light is used to remind
you to close the door, when the
vehicle starts, any door is not
closed, the alarm lamp lights up.
Engine fault alarm lamp
When the engine running, the
light turns up saying there is
potential problem of engine
control. At this point, although
cars can continue to drive, also
please going to the zhengzhou
nissan
service
network
maintenance
as
soon
as
possible. Don't let your car was
towed to the depot for failure. If
not check and repair the engine
control problem, continuing to
drive
will
lead
to
bad
performance,
reduce
fuel
economy, and cause damage to
the engine control system.
Overspeed alarm lamp
This lamp is used to remind
users of not overspeeding more
than the current system setting
speed limit (120 km/h), when the
speed is greater than this value,
the alarm lamp lights up, when
the speed is less than 118 km/h,
alarm lights went out.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
1-10 Instruments and controls
WINDSHIELD WIPER AND
WASHER SWITCH
Turn the ignition switch to ”ACC”
or “ON” and push the lever down
to operate the wiper.
Pull the lever toward you to
operate the washer.
Caution:
●
Do not operate the washer
continuously for more than 30
seconds.
●
Do not operate the washer
if the reservoir tank is dry.
Warning
In freezing temperatures the
washer solution may freeze on
the windshield and obscure
your vision. Warm windshield
with the defroster before you
wash the windshield.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls 1-11
HEAD LIGHT, DIMMER
AND TURN SIGHAL
SWITCH
Lighting
Turn
the
switch
to
the
“
”position:
The clearance, tall, license plate
and instrument lights will come
on.
Turn the switch to “
”position:
Headlights will come on and all
the other lights remain on.
To select the high beam, push
the lever forward. Pull it back to
select the low beam.
The buzzer will alarm if you
select the high beam and the
driver’s side door isn’t locked
well. Don
’t worry, please turn off
the high beam or lock the
driver
’s side door well to turn off
the alarm.
Passing signal
Pulling the lever forward you will
turn on the passing signal even
when the headlight switch is off.
Turn signal light
Move the lever or down to signal
to the turning direction. When
the turn is completed, the turn
signals conceal automatically.
Lane change signal
To indicate a lane change, move
the lever up or down to the point
where lights begin flashing.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
1-12 Instruments and controls
FRONT/REAR FOG LIGHT
SWITCH (IF SO
EQUIPPED)
To turn the front fog lights on,
turn the switch to the “
”
position.
To turn the front and rear fog
lights on, turn the switch to the
“
” position.
To turn them off, turn the switch
to the OFF position.
The low-beam headlight function
must be on for the fog lights to
operate.
The
fog
lights
automatically turn off whenever
the off headlight functions is
selected.
The rear fog light should be used
only when visibility is seriously
reduced.
HAZARD WARNING
FLASHER SWITCH
Push the switch on to warn other
drivers when you must stop or
park
under
emergency
conditions. All turn signal lights
will flash.
Warning
●
Be sure to park the vehicle
down the road in case of
emergency condition.
Do not use the switch while
moving on the highway unless
unusual circumstances force
you to drive so slowly that
your vehicle might become a
hazard to other traffic.
●
Some
state
laws
may
prohibit the use of the hazard
warning flasher switch while
driving.
●
Turn signal does not work
when the hazard warning
flasher switch is operating.
The flasher can be actuated with
the ignition switch either off or
on.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls 1-13
CIGARETTE LIGHTER
AND ASH TRAYS
Cigarette lighter
The cigarette lighter operates
when the ignition switch is
in ”ACC” or ”ON”.
Push the lighter in all the way.
When the lighter is heated, it will
spring out.
Replace the lighter in its original
position after use.
Caution
The cigarette lighter should
not be used while driving in
order that full attention may be
given to the driving operation.
POWER WINDOW
The power window operates
when the ignition key is “ON”.
To open or close the window,
push down or pull up the switch
and hold it. The main switch
(driver side switches) will open
or close all the window.
Locking passenger’s window
●
When the lock switch is
pushed in, the passenger side
window (except the driver’s
window) can’t be opened or
closed. Push it again to
cancel.
Warning
●
Make
sure
that
the
passenger has his/her hands,
etc. inside the vehicle before
closing the windows.
●
Do
not
leave
children
unattended inside the vehicle.
They
could
unknowingly
activate switches.
The passenger side switch will
open
or
close
only
the
corresponding window. To open
or close the window, push down
-------------------------------------------------------------------------------------------------------------------------------------------------------------
1-14 Instruments and controls
or pull up the switch and hold it.
Automatic operation
To fully open or close the driver’s
side window, completely push
down or pull up the switch and
release it; it need not be held.
The window will automatically
open or close all the way. To
stop the window, just pull up or
push down the switch on the
opposite side.
INTERIOR LIGHT
The
interior
light
has
a
three-position switch.
●
When the light is in the “O”
or “DOOR” position, the
interior light will illuminate by
opening the doors.
●
When the switch is in the
“OFF” position, the interior
light
will
not
illuminate,
regardless of door position..
●
When the switch is in the
“ON” position, the interior
light will illuminate, whether
any door is open or closed.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст