| | | ------------------------------------------------------------------------------------------------------------------------------------------------------------- KEYS WARNING! Key Fob Before exiting a vehicle, always shift the automatic transmission into PARK or the A code number is stamped on the plate and manual transmission into FIRST gear or attached to the key fob. Detach this plate REVERSE, apply the parking brake, then and store it in a safe place (not in the turn the engine OFF, remove the key fob vehicle) in case you need to replace the from the vehicle and lock your vehicle. emergency key. Never leave children alone in a vehicle, Also, write down the code number and keep Key Fob or with access to an unlocked vehicle. it in a separate safe and convenient place. Allowing children to be in a vehicle unat- Do not keep it in the vehicle. 1 — Emergency Key tended is dangerous for a number of 2 — Key Fob reasons. A child or others could be seri- If the key fob is lost, contact an authorized 3 — Key Code Number Plate ously or fatally injured. Children should dealer. be warned not to touch the parking NOTE: brake, brake pedal or the gear selector. To use the emergency key, push the mechan- Key fob configuration may vary with ical latch on the back side of the key fob and Do not leave the key fob in or near the equipped features. Please see the example pull out the emergency key. vehicle, or in a location accessible to shown below: children. A child could operate power NOTE: windows, other controls, or move the Always keep a spare key fob if one is lost. vehicle. If a key fob is lost, see an authorized Do not leave children or animals inside dealer as soon as possible. parked vehicles in hot weather. Interior The driver must carry the key fob to ensure heat build-up may cause serious injury or death. the Keyless Entry System functions prop- erly. 12 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Key Fob Functions The setting changes when the lock button Key Fob Buttons on the key fob is pushed, and the beep will With A Vehicle Security Alarm System Lock Button activate at the set volume (if the beep sound has been set to not activate, it will The hazard warning lights will flash when the To lock the doors, trunk lid, and fuel filler not activate). vehicle security alarm system is armed or door, push the lock button on the key fob. disarmed. The hazard warning lights will flash once and Complete changing the setting by doing any a beep will sound. of the following: With Advanced Keyless Function Placing the ignition in the ACC or ON posi- Unlock Button A beep will sound when the doors, trunk lid, tion. and fuel filler door are locked or unlocked To unlock the doors and trunk lid, push the using the key fob. The beep volume can be Closing the driver's door. unlock button on the key fob, and the hazard adjusted or turned off. warning lights will flash twice. Opening the trunk lid. Use the following procedure to change the The system can be set to unlock both doors. Not operating the key fob for ten seconds. beep setting: Use the following procedure to change the Pushing any button, except the lock setting: 1. Place the ignition to the OFF position, button on the key fob. and close the doors and the trunk lid. 1. Place the ignition in the OFF position, Pushing a request switch on the exterior and close the doors and trunk lid. 2. Open the driver's door. door handle. 2. Open the driver's door. 3. Within 30 seconds of opening the driver's NOTE: door, push and hold the lock button on 3. Within 30 seconds of opening the driver's Refer to “Doors” in this chapter for further the key fob for five seconds. door, push and hold the unlock button on information. the key fob for five seconds. NOTE: The operation indicator light on the key fob flashes when the buttons are pushed. NOTE: The doors, trunk lid, and fuel filler door The sound of the doors locking/unlocking will lock, and the beep will activate at the can be heard. After this, the system will current volume (if the beep is currently set change the setting when the unlock button is to not activate, it will not activate). pushed (the sound of the doors locking/ unlocking can be heard). 13 ------------------------------------------------------------------------------------------------------------------------------------------------------------- The setting change can be completed by Turning On The Alarm Key Fob Antenna Location doing any one of the following: Pushing the panic button for one second or Placing the ignition in the ACC or ON posi- more will trigger the alarm for about two tion. minutes and thirty seconds, and the following will occur: Closing the driver’s door. The horn sounds intermittently. Opening the trunk lid. The hazard warning lights flash. Not operating the key fob for ten seconds. Turning Off The Alarm Pushing any button except the unlock button on the key fob. The alarm will stop by pushing any button on Key Fob Antenna Location the key fob. Pushing a request switch on the exterior door handle. Operational Range 1 — Interior Antenna 2 — Operational Range Trunk Button The system operates only when the driver is in the vehicle or within operational range, To open the trunk lid, push and hold the NOTE: and the key fob is being carried. trunk button until the trunk lid opens. The engine may not start if the key fob is Starting The Engine placed in or around the following areas: Panic Button Starting the engine may be possible even if Around The Instrument Panel To turn the Panic Alarm on or off, push and the key fob is outside the vehicle and close hold the panic button on the key fob and In The Storage Compartments to a door or window. Always start the engine release. When the Panic Alarm is on, the from the driver's seat. headlights will turn on, the park lights will Key Fob Battery Replacement flash, the horn will pulse on and off, and the If the vehicle is started, and the key fob is turn signal lights will flash. If the key fob does not work, and the indi- not in the vehicle, the vehicle will not restart cator lights do not flash, the battery may be after it is shut off. The ignition is placed in NOTE: low or depleted. the OFF position. The panic button will work if the doors or trunk are opened or closed. 14 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Replace with a new battery (CR2025 type) Replacing The Key Fob Battery before the key fob becomes unusable. Proceed as follows: The following conditions indicate that the 1. Push the mechanical release button and battery power is low: remove the emergency key. Key indicator light (green) flashes in the instrument cluster for about 30 seconds after the ignition is placed in the OFF posi- tion. The system does not operate, and the Pry Case Left Side operation indicator light on the key fob does not flash when the buttons are 3. Insert a coin, a flat blade screw driver, or pushed. the tip of your emergency key into the side gap and carefully pry in the direction The system's operational range is reduced. of the arrow to open the cover. NOTE: Emergency Key Removed Replacing the battery at an authorized dealer 1 — Emergency Key is recommended to prevent damage to the 2 — Key Fob Case With Mechanical Re- key fob. If replacing the battery alone, follow lease Button the instructions below. 2. Insert a coin, a flat blade screw driver, or the tip of your emergency key into the now exposed slot and carefully pry in the direction of the arrows to open the cover slightly. Pry Case Right Side 15 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 4. Separate the key fob case, then remove Engine Start Function When Key Fob the battery. Battery Is Discharged If a key fob has discharged or malfunctioned, start the engine by holding the key fob over the START/STOP ignition button. Be careful to not allow the following because the signal from the key fob will not be received correctly, and the engine may not start: Contact with metal parts of other key fobs Install New Battery or metal objects NOTE: Contact from key fobs from other vehicle’s Remove Back Cover For Battery Replacement Be careful not to allow the rubber ring to be equipped with an immobilizer system scratched or damaged. If the rubber ring 1 — Key Fob Battery Contact with devices for electronic comes out, reinstall it before inserting a new 2 — Key Fob Case battery. purchases or security passage touch Key Suspend Function 5. Insert a new battery with the positive pole facing up. Then, cover the battery with If a key fob is left in the vehicle, key fob the battery cap. functions are temporarily suspended to prevent unlawful use of the vehicle. 6. Close the cover and reinsert the emer- gency key. To restore the functions, push the unlock button on the functions-suspended key fob. No Keys Touching The Key Fob 16 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 5. Verify that the keyless ignition start indi- In this case, the engine may start. However, cator light (green) turns on. contact an authorized dealer as soon as possible. 6. Push the START/STOP ignition button to start the engine. If the keyless ignition start indicator light (green) does not illuminate, perform the operation from the beginning. If it does not illuminate, contact an authorized dealer. To change the ignition position without starting the engine, perform the following No Key Fob Touching The Key Fob operations after the keyless ignition start If the engine cannot be started due to a indicator light (green) turns on: discharged key fob battery, the engine can 1. Release the clutch pedal (manual trans- be started using the following procedure: mission) or brake pedal (automatic trans- 1. Continue to depress the brake pedal mission). Discharged Key Fob Battery Start Procedure firmly until the engine has completely 2. Push the START/STOP ignition button to started. When touching the START/STOP ignition change the ignition position. The ignition button using the backside of the key fob, 2. Manual Transmission: Continue to cycles in the order of ACC, ON, and OFF touch the START/STOP ignition button with depress the clutch pedal firmly until the each time the START/STOP ignition the key fob buttons facing up. engine has completely started. button is pushed. The engine cannot be started unless the 3. Verify that the keyless ignition start indi- NOTE: clutch pedal is fully depressed (manual cator light (green) flashes. To change the ignition position again, transmission) or the brake pedal is fully perform the operation from the beginning. depressed (automatic transmission). 4. Touch the START/STOP ignition button using the backside of the key fob while If there is a malfunction with the START/ the keyless ignition start indicator light STOP ignition button function, the keyless (green) flashes. ignition start indicator light (amber) flashes. 17 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Emergency Operation For Starting The Engine Non-FCA genuine electronic equipment is General Information installed in the vehicle If the key warning light (red) illuminates, or The following regulatory statement applies to the keyless ignition start indicator light There is equipment which discharges all Radio Frequency (RF) devices equipped (amber) flashes, this could indicate that the radio waves near the vehicle in this vehicle: engine may not start using the usual starting The key fob may consume battery power This device complies with Part 15 of the FCC method. Contact an authorized dealer as excessively if it receives high-intensity Rules and with Innovation, Science and soon as possible. radio waves. Do not place the key fob near Economic Development Canada If this occurs, the engine can be electronic devices such as televisions or license-exempt RSS standard(s). Operation force-started. push and hold the START/ personal computers is subject to the following two conditions: STOP ignition button until the engine starts. To avoid damage to the key fob, DO NOT: 1. This device may not cause harmful inter- Other procedures necessary for starting the Drop the key fob ference, and engine such as having the key fob in the vehicle, and depressing the clutch pedal Get the key fob wet 2. This device must accept any interference received, including interference that may (manual transmission) or the brake pedal Disassemble the key fob unless replacing cause undesired operation. (automatic transmission) are required. the battery Key Fob Cautions Le présent appareil est conforme aux CNR Expose the key fob to high temperatures d`Innovation, Science and Economic Devel- such as direct sunlight Because the key fob uses low-intensity radio opment applicables aux appareils radio waves, it may not function under the Expose the key fob to any kind of magnetic exempts de licence. L'exploitation est following conditions: field autorisée aux deux conditions suivantes: The key fob is carried with a communica- Place heavy objects on the key fob 1. l'appareil ne doit pas produire de brouil- tion device such as cellular phones lage, et Put the key fob in an ultrasonic cleaner The key fob contacts or is covered by a 2. l'utilisateur de l'appareil doit accepter metal object Put any magnetized objects close to the tout brouillage radioélectrique subi, key fob The key fob is near electronic devices such même si le brouillage est susceptible as personal computers d'en compromettre le fonctionnement. 18 ------------------------------------------------------------------------------------------------------------------------------------------------------------- La operación de este equipo está sujeta a las OFF siguientes dos condiciones: The power supply to electrical devices turns 1. es posible que este equipo o dispositivo off, and the keyless ignition start indicator no cause interferencia perjudicial y light (amber) also turns off. In the OFF posi- tion, the steering wheel is locked. 2. este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la ACC (Accessory) que pueda causar su operación no Some electrical accessories will operate and deseada. the indicator light (amber) illuminates. In Keyless START/STOP Ignition Button the ACC position, the steering wheel is NOTE: Changes or modifications not expressly unlocked. NOTE: approved by the party responsible for compli- The Keyless Entry System does not function ance could void the user’s authority to The engine starts by pushing the START/ while the keyless ignition has been placed in operate the equipment. STOP ignition button while depressing the the ACC position, and the doors will not lock/ clutch pedal (manual transmission) or the unlock even if they have been locked manu- IGNITION SWITCH brake pedal (automatic transmission). To ally. change the ignition position, push the Push Button Start Positions START/STOP ignition button without ON depressing the clutch or brake pedal. This is the normal running position after the The system operates only when the key fob is within operational range. Do not leave the ignition in the ON posi- engine is started. tion while the engine is not running. The NOTE: When the clutch pedal (manual transmission) battery could discharge. If the ignition is or brake pedal (automatic transmission) are The indicator light (amber) turns off (the left in the ACC position (for automatic indicator light [amber] illuminates when the not depressed and the keyless ignition transmission, the gear selector is in the START/STOP ignition button is pushed, the ignition has been placed in the ON position PARK position, and the ignition is in ACC), and the engine is not running). ignition cycles in the order of OFF, ACC, and the ignition cycles to the OFF position ON. Pushing the START/STOP ignition button automatically after about 25 minutes. Some indicator lights/warning lights should again from ON/RUN position, places the igni- be inspected before the engine is started. tion in the OFF position. 19 ------------------------------------------------------------------------------------------------------------------------------------------------------------- When the keyless ignition has been placed in ADVANCED KEYLESS WARNING! (Continued) the ON position, the sound of the fuel pump ENTRY SYSTEM — IF motor operating near the fuel tank can be Do not leave the key fob in or near the heard. This does not indicate a problem. vehicle, (or in a location accessible to EQUIPPED children), and do not leave the ignition WARNING! Advanced Keyless Entry System in the ACC or ON/RUN mode. A child Never use the PARK position as a substi- could operate power windows, other The Advanced Keyless Entry System is an controls, or move the vehicle. tute for the parking brake. Always apply enhancement that allows you to lock/unlock the parking brake fully when exiting the Be sure the parking brake is fully disen- the doors, trunk lid, and fuel filler door. vehicle to guard against vehicle move- gaged before driving; failure to do so can ment and possible injury or damage. The Advanced Keyless Entry System allows lead to brake failure and a collision. the driver to start the ignition with the push When exiting the vehicle, always make Always fully apply the parking brake of a button as long as the key fob is in the sure the ignition is in the OFF mode, when leaving your vehicle, or it may roll passenger compartment. remove the key fob from the vehicle, and and cause damage or injury. Also be lock your vehicle. certain to leave the transmission in If equipped, the vehicle security alarm PARK. Failure to do so may allow the system may be armed/disarmed with the Never leave children alone in a vehicle, vehicle to roll and cause damage or push of the lock/unlock button located on or with access to an unlocked vehicle. injury. the key fob. Allowing children to be in a vehicle unat- tended is dangerous for a number of Driving the vehicle with the parking System Malfunctions/Warnings reasons. A child or others could be seri- brake engaged, or repeated use of the ously or fatally injured. Children should System malfunctions or warnings are indi- parking brake to slow the vehicle may be warned not to touch the parking cause serious damage to the brake cated by the following warning lights or brake, brake pedal or the transmission beeps (refer to “Getting To Know Your Instru- system. gear selector. ment Panel” for further information): (Continued) Key indicator light (red) Ignition ON warning beep 20 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Key fob removed from vehicle warning If the key fob does not operate when WARNING! beep pushing a button, the operational range becomes too small, or the warning light Radio waves from the key fob may affect Request switch inoperable warning beep does not illuminate or flash, the battery medical devices such as pacemakers: Key fob left in trunk warning beep may be weak or discharged. To install a before using the key fob near people who new battery, refer to “Keys” in this chapter use medical devices, ask the medical Key fob left in vehicle warning beep for further information. device manufacturer or your physician if radio waves from the key fob will affect the If you have a problem with the key fob, or the Battery life is about one year. Replace the device. key fob is lost or stolen, contact an autho- battery with a new one if the key indicator rized dealer as soon as possible for a replace- light (green) flashes in the instrument ment and to make the lost or stolen key fob NOTE: cluster. Replacing the battery about once inoperative. The Advanced Keyless Entry System func- a year is recommended because the key tions can be deactivated to prevent any indicator light may not illuminate or flash NOTE: possible adverse effect on a user wearing a if the battery is low or depleted. Changes or modifications not approved by pacemaker or other medical device. If the the party responsible for compliance could Additional key fobs may be obtained at an system is deactivated, you will be unable to void the user's authority to operate the authorized dealer. Up to six key fobs may start the engine by carrying the key fob. equipment. be used with the Advanced Keyless Entry Contact an authorized dealer for details. If System per vehicle. Bring all key fobs to the Advanced Keyless Entry System has The Advanced Keyless Entry System oper- an authorized dealer when additional keys been deactivated, you can start the engine by ational range may vary due to local are required. following the procedure indicated when the weather conditions. key fob battery becomes discharged. The Advanced Keyless Entry function allows The Advanced Keyless Entry System is you to lock/unlock the door, trunk lid, and fully operational (door/trunk lid/fuel filler fuel filler door, or open the trunk lid while door lock/unlock) when the ignition is carrying the key fob. placed in the OFF position. The Advanced Keyless Entry System does not operate if the ignition is placed in any position other than the OFF position. 21 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Operational Range Locking/Unlocking The Doors And The Trunk Opening The Trunk Lid Lid The system operates only when the driver is in or around the vehicle while the key fob is being carried. Electronic Trunk Release Request Switch Door Functions 1 — Exterior Antenna 1 — Exterior Antenna 2 — Operational Range Advanced Keyless Entry Sensors 2 — Operational Range 3 — Distance (31 inches) 3 — Distance (31 inches) 1 — Operational Range 2 — Interior Antennas NOTE: The system may not operate if you are too NOTE: close to the windows or door handles. When the battery power is low, or in places where there are high-intensity radio waves or noise, the operational range may reduce, or the system may not operate. 22 ------------------------------------------------------------------------------------------------------------------------------------------------------------- General Information La operación de este equipo está sujeta a las Immobilizer System siguientes dos condiciones: The following regulatory statement applies to The immobilizer system allows the engine to all Radio Frequency (RF) devices equipped 1. es posible que este equipo o dispositivo start only with a recognized key fob. in this vehicle: no cause interferencia perjudicial y If someone attempts to start the engine with This device complies with Part 15 of the FCC 2. este equipo o dispositivo debe aceptar an unrecognized key fob, the engine will not Rules and with Innovation, Science and cualquier interferencia, incluyendo la start, preventing unlawful vehicle use. Economic Development Canada que pueda causar su operación no If you have a problem with the immobilizer license-exempt RSS standard(s). Operation deseada. system or the key fob, contact an authorized is subject to the following two conditions: NOTE: dealer. 1. This device may not cause harmful inter- Changes or modifications not expressly To avoid damage to the key fob, DO NOT: ference, and approved by the party responsible for compli- ance could void the user’s authority to Drop the key fob 2. This device must accept any interference operate the equipment. received, including interference that may Get the key fob wet cause undesired operation. VEHICLE SECURITY ALARM Expose the key fob to any kind of magnetic field Le présent appareil est conforme aux CNR SYSTEM — IF EQUIPPED d`Innovation, Science and Economic Devel- Expose the key fob to high temperatures opment applicables aux appareils radio Modifications And Add-On Equipment such as direct sunlight exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: FCA cannot guarantee the immobilizer and NOTE: security alarm system operation if the system 1. l'appareil ne doit pas produire de brouil- Changes or modifications not expressly has been modified or if any add-on equip- lage, et approved by the party responsible for ment has been installed. compliance could void the user's authority 2. l'utilisateur de l'appareil doit accepter NOTE: to operate the equipment. tout brouillage radioélectrique subi, To avoid damage to the vehicle, do not même si le brouillage est susceptible If the engine does not start with the modify the system or install any add-on d'en compromettre le fonctionnement. correct key fob, and the warning light equipment to the immobilizer, the security keeps illuminating or flashing, the system alarm system, or the vehicle. 23 ------------------------------------------------------------------------------------------------------------------------------------------------------------- may have a malfunction. Contact an NOTE: NOTE: authorized dealer. Signals from a TV, radio station, transceiver, If the warning light flashes continu- or mobile telephone could interfere with your The key fobs carry a unique electronic ously while you are driving, do not turn the immobilizer system. If you are using the code. For this reason, and to assure your engine off. Contact an authorized dealer proper key fob and the engine fails to start, safety, obtaining a replacement key fob and have it checked. If the engine is shut check the warning light. can only be done through an authorized off while the warning light is flashing, dealer, and will require some waiting time. Arming it will not be able to be restarted. Always keep a spare key fob in case one is The system is armed when the ignition is Because the electronic codes are reset lost. If a key fob is lost, contact an autho- cycled from the ON to OFF position. The when the immobilizer system is repaired, rized dealer as soon as possible. warning light in the instrument cluster the keys are needed. Make sure to bring all flashes every two seconds until the system is the key fobs to an authorized dealer so If you lose a key fob, an authorized dealer disarmed. that they can be programmed. will reset the electronic codes of your remaining key fobs and immobilizer Disarming Vehicle Security Alarm System — If system. Bring all the remaining key fobs to Equipped The system is disarmed when the ignition is an authorized dealer to reset. Starting the placed in the ON position with the correct vehicle with a key fob that has not been If the security alarm system detects an inap- programmed key fob. The warning light reset is not possible. propriate entry into the vehicle, or the intru- illuminates for about three seconds and then sion sensor detects movement in the vehicle, Operation turns off. If the engine does not start with the which could result in the vehicle or its correct key fob, and the warning light contents being stolen, the alarm alerts the The engine may not start and warning remains illuminated or flashing, try the surrounding area by sounding the siren/horn light may illuminate or flash if the key fob is following: and flashing the hazard warning lights. placed in an area difficult for the system to Make sure the key fob is within the opera- detect the signal, such as on the instrument The system will not function unless it is tional range for signal transmission. panel. Move the key fob to a location within properly armed. Follow the arming procedure the signal range, place the ignition in the Place the ignition in the OFF position, and correctly. OFF position, and restart the engine. then restart the engine. If the engine does not start after three or more tries, contact an authorized dealer. 24 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Siren/Horn Triggering Conditions How To Arm The System Opening the engine compartment The siren/horn sounds intermittently, and 1. Close the windows and the convertible top. Placing the ignition in the ON position the hazard warning lights flash for about 2. Place the ignition in the OFF position. When the doors are locked by pushing the 30 seconds when the system is triggered lock button on the key fob, or using the emer- by any one of the following: 3. Make sure the engine compartment, gency key, the hazard warning lights will Unlocking a door with an inside door lock convertible top, doors, and trunk lid are flash once to indicate that the vehicle secu- knob closed. rity alarm system is armed. Forcing open a door, the engine compart- 4. Push the lock button on the key fob, or NOTE: ment, or the trunk lid lock the driver's door from the outside If any door or trunk lid remains closed for with the emergency key. The hazard Opening the hood by operating the hood 30 seconds, the doors, and trunk lid auto- warning lights will flash once. With The release handle matically re-lock, and the vehicle security Advanced Keyless Entry function: push a alarm system arms even if a window opens Placing the ignition in the ON position request switch. The warning light in or the convertible top is left down. without starting the engine the instrument cluster display flashes twice per second for 20 seconds. After To reactivate the intrusion sensor, turn off With the intrusion sensor: the intrusion 20 seconds the system is fully armed. the armed vehicle security alarm system sensor detects a movement in the vehicle and then rearm it. The vehicle security alarm system can also The system will be triggered again (up to be armed by activating the auto re-lock func- The intrusion sensor is operational when 10 times) if one of the above conditions tion with all the doors, the trunk lid and the the vehicle security alarm system is remains. engine compartment closed. armed. To cancel the intrusion sensor, The trunk lid will not open when the vehicle push the intrusion sensor cancel button The system will disarm if one of the following security alarm system is activated. each time the vehicle security alarm operations takes place within 20 seconds system is armed. If the battery becomes depleted while the after pushing the lock button: To rearm the vehicle security alarm system is armed, the system, perform the arming procedure again: siren will activate, and the hazard warning Unlocking any door lights will flash during the battery charging or replacement process. Opening any door 25 ------------------------------------------------------------------------------------------------------------------------------------------------------------- To Turn Off An Armed System DOORS Manual Lock/Unlock Knob An armed system can be turned off using any Operation From Inside Lock/Unlock With Emergency Key one of the following methods: To lock any door from the inside, push the Pushing the unlock button on the key fob. The doors, trunk lid, and fuel door lock auto- door lock knob. To unlock, pull it outward. matically when the driver's door is locked Starting the engine with the START/STOP This does not operate the other door locks. using the emergency key. ignition button. Lock With Emergency Key: Insert key into With The Advanced Keyless Entry function: driver’s door and turn to the left (toward pushing a request switch on the exterior front of car). door handles. Unlock With Emergency Key: Insert key into NOTE: driver’s door and turn to the right (toward When the doors are unlocked by pushing the back of car). unlock button on the key fob, the hazard warning lights will flash twice to indicate Both doors unlock when the driver's door is that the system is turned off. unlocked using the emergency key. To Stop The Alarm Interior Door Lock Knob Turn the emergency key toward the front to A triggered alarm can be turned off using any lock, toward the back to unlock. 1 — Door Lock Knob Position (Red Indica- one of the following methods: tor Not Seen When Locked) CAUTION! Pushing the unlock button on the key fob. 2 — Door Unlock Knob Position (Red Indi- An unlocked vehicle is an invitation for cator Seen When Unlocked) Starting the engine with the START/STOP thieves. Always remove key fob from the ignition button. vehicle and lock all doors when leaving the With The Advanced Keyless Entry function: vehicle unattended. NOTE: The red indication can be seen when the pushing a request switch on the exterior door handles or the electric trunk release door lock knob is unlocked. while the key fob is being carried. The hazard warning lights will flash twice. 26 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Operation From Outside NOTE: WARNING! (Continued) To lock the passenger door with the door lock The doors, trunk lid, and the fuel filler Never leave children alone in a vehicle, knob from the outside, push the door lock door cannot be locked while any other door or with access to an unlocked vehicle. knob to the lock position and close the door is open. Allowing children to be in a vehicle unat- (holding the door handle in the open position tended is dangerous for a number of The key fob may not be able to be detected is not required). reasons. A child or others could be seri- by the vehicle keyless-go system if it is NOTE: ously or fatally injured. Children should located next to a mobile phone, laptop or When locking the door this way, be careful be warned not to touch the parking other electronic device; these devices may not to leave the key fob inside the vehicle. brake, brake pedal or the gear selector. block the key fob’s wireless signal and The driver's door lock knob cannot be used prevent the keyless-go system from Do not leave the key fob in or near the while the driver's door is open. starting the vehicle. vehicle, or in a location accessible to children, and do not leave the ignition of WARNING! a vehicle equipped with Advanced Keyless Entry in the ACC or ON/RUN For personal security and safety in the positions. A child could operate power event of a collision, lock the vehicle windows, other controls, or move the doors before you drive as well as when vehicle. you park and leave the vehicle. When leaving the vehicle, always remove Central Lock/Unlock the key fob from the vehicle and lock your vehicle. If equipped with Advanced The doors, trunk lid, and fuel door lock auto- Keyless Entry, always make sure the matically when the lock rocker switch is Central/Power Door Lock Switch keyless ignition is in OFF position, pushed with both doors closed. Both unlock remove the key fob from the vehicle and when the unlock rocker switch is pushed. lock the vehicle. Unsupervised use of vehicle equipment may cause severe personal injuries or death. (Continued) 27 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Double Locking System — If Equipped Lock/Unlock With Advanced Keyless Entry Function — If Equipped The double locking system is designed to prevent someone who has broken into your The doors, trunk lid, and fuel filler door can vehicle from opening the door from the be locked/unlocked by pushing the request inside. If you have any problems with the switch on the exterior door handle while the double locking system, contact an autho- key fob is being carried. rized dealer. System Activation Emergency Key Lock Procedure Proceed as follows: 1. Close both the windows and the convert- The system can be activated by pushing the ible top. lock button on the key fob twice within three seconds. 2. Place the ignition in the OFF position, and take the key fob with you. With The Advanced Keyless Function: the system can be activated by pushing the 3. Close both doors and trunk lid. request switch on the exterior door handle Request Switch On Exterior Door Handle twice within three seconds. 4. Insert the emergency key in the driver's To Lock door, turn the emergency key to the lock NOTE: position (counter clockwise/left), and The system cannot be activated when any To lock the doors, trunk lid, and fuel filler return it to the center position. Then turn door is open. door, push the button on the exterior door it to the lock position (counter clockwise/ handle; the hazard warning lights will flash System Deactivation left) again within three seconds. once. Unlock the driver's door, or place the ignition A beep will sound once. 5. The indicator light illuminates for in the ON position. If the power supply is about three seconds to indicate that the interrupted (fuse blows or the battery is system has been activated. disconnected), the system can only be deac- tivated by unlocking a door with the emer- gency key. 28 ------------------------------------------------------------------------------------------------------------------------------------------------------------- To Unlock It may require a few seconds for the doors set to not activate, it will not activate). to unlock after the request switch on the The setting changes each time the lock Driver's door button is located on the exterior exterior door handle is pushed. button on the key fob is pushed and the door handle. beep will activate at the set volume (if The key fob may not be able to be detected To unlock the doors, trunk lid, and fuel filler the beep sound has been set to not acti- by the vehicle keyless-go system if it is door, push the button on the exterior door vate, it will not activate). located next to a mobile phone, laptop or handle; the hazard warning lights will flash other electronic device; these devices may 4. The setting change is completed by doing twice. block the key fob’s wireless signal and any one of the following: To unlock both doors and fuel filler door, prevent the keyless-go system from push the button on the exterior door handle starting the vehicle. Place the ignition in the ACC or ON twice within three seconds. Two more beeps position A beep sound is heard for confirmation when will sound. the doors, and fuel filler door are locked/ Closing the driver's door Front Passenger Door Request Switch: unlocked using the request switch on the Opening the trunk lid exterior door handle. If you prefer, the beep To unlock both doors and fuel filler door, sound can be turned off. Not operating the key fob for 10 seconds push the button on the exterior door handle. A beep will sound twice; the hazard warning The volume of the beep sound can also be Pushing any button except the lock lights will flash twice. changed. Use the following procedure to button on the key fob change the setting: NOTE: Pushing a request switch on the exte- 1. Place the ignition in the OFF position and rior door handle Confirm that both doors, and fuel filler close both of the doors and the trunk lid. door are securely locked. With Vehicle Security Alarm System 2. Open the driver's door. For the trunk lid, move it without pushing The hazard warning lights flash when the the electric trunk lid opener to verify that 3. Within 30 seconds of opening the driver's security alarm system is armed or disarmed. the trunk lid has not been left open. door, push and hold the lock button on Refer to “Vehicle Security Alarm System” in the key fob for five seconds or longer. The this chapter for further information. Both doors and the fuel filler door cannot doors, and fuel filler door will lock, an be locked when any door is open. The setting can be changed so that the doors audible beep will activate at the currently and the fuel filler door are locked automati- set volume (if the beep sound is currently 29 ------------------------------------------------------------------------------------------------------------------------------------------------------------- cally without pushing the button on the exte- operations are not performed within about Auto Lock/Unlock Function — If Equipped rior door handle. Refer to “Personalization 60 seconds. Features” in “Getting To Know Your Instru- When the vehicle speed exceeds 12 mph ment Panel” for further information. If equipped with a vehicle security alarm (20 km/h), the doors, and fuel filler door lock system, the hazard warning lights will flash automatically. Auto-Lock Function for confirmation. When the ignition is placed in the OFF posi- A beep is heard when both doors are closed The time required for the doors to lock auto- tion, the doors and fuel filler door unlock while the key is carried. Both doors, the matically can be changed. Refer to “Person- automatically. trunk lid, and fuel door are locked automati- alization Features” in “Getting To Know Your cally after about three seconds when the These functions can also be disabled so that Instrument Panel” for further information. Advanced Keyless Entry key fob is out of the they do not operate. operational range. Locking/Unlocking With A Key Fob Auto Lock/Unlock Function Setting Change The hazard warning lights will flash once The doors, trunk lid, and fuel filler door can Using Door-Lock Switch (even if the driver is in the operational range, be locked/unlocked by operating the keyless both doors, trunk lid, and fuel filler door are The doors and fuel filler door can be set to entry system key fob. Refer to “Keys” in this locked automatically after about 30 seconds). lock or unlock automatically by selecting any chapter for further information. one of the functions from the following table If outside of the operational range before the Locking/Unlocking With Door-Lock Switch and using the door-lock switch on the interior doors and trunk lid are closed, or another key door panel. There are only a total of six auto fob is left in the vehicle, the auto-lock func- Both doors and the fuel filler door lock auto- lock/unlock settings available for automatic tion will not work. matically when the lock side is pushed. They transmission vehicles, and three for manual unlock when the unlock side is pushed. Always make sure that both doors and trunk transmission vehicles. Be sure to push the lid are closed and locked before leaving the To lock the doors and fuel filler door from an unlock side of the driver's door-lock switch vehicle. The auto-lock function does not open door, push the lock side of the door lock the correct number of times according to the close the power windows. switch and then close the door. selected function number. If the switch is mistakenly pushed seven times on an auto- Auto Re-Lock Function NOTE: matic transmission vehicle or four times on a When locking the doors this way, be careful After unlocking with the button on the exte- manual transmission, the procedure will be not to leave the key fob inside the vehicle. rior door handle, the doors and fuel filler door cancelled. If this occurs, start the procedure will automatically lock if any of the following from the beginning. 30 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Function Number Function (*) 1 The auto door-lock function is disabled. 2 The doors and the fuel filler door lock automatically when the vehicle speed is about 12 mph (20 km/h) or more. 3 The doors and the fuel filler door lock automatically when the vehicle speed is about 12 mph (20 km/h) or more. The doors, trunk lid, and fuel filler door unlock when the ignition is cycled from the ON to OFF position. 4 Automatic Transmission Vehicles Only: when the ignition is placed in the ON position, and the gear selector is shifted from PARK to any other gear position, the doors, and fuel filler door lock automatically. 5 Automatic Transmission Vehicles Only: when the ignition is placed in the ON position, and the gear selector is shifted from PARK to any other gear position, the doors and the fuel filler door lock automatically. When the dear selector is shifted to PARK while the ignition is placed in the ON position, the doors and the fuel filler door unlock automatically. 6 Automatic Transmission Vehicles Only: the doors and the fuel filler door lock automatically when the vehicle speed is about 12 mph (20 km/h) or more. When the gear selector is shifted to PARK while the ignition is placed in the ON position, the doors and the fuel filler door unlock automatically. (*) For other settings for the auto door lock function contact an authorized dealer. NOTE: Settings Changing 3. Push and hold the lock side of the driver's Function number 3 is the factory setting for door-lock switch within 20 seconds of Settings can be changed using the following your vehicle. placing the ignition in the ON position, procedure: and make sure a beep is heard about eight 1. Safely park the vehicle. Both doors must seconds afterwards. remain closed. 2. Place the ignition in the ON position. 31 | |
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст