Fiat Qubo (2021 year). Manual in english — page 6
91
What it means
What to do
amber
WATER IN DIESEL FILTER (Multijet versions)
The warning light switches on when the ignition key
is turned to MAR, but it should switch off after a few
seconds.
The warning light
switches on to indicate the
presence of water in dated the diesel filter.
On some versions the display shows the dedicated
message.
14)
amber
INDICATION OF DIESEL EMISSIONS ADDITIVE LOW
LEVEL (UREA)
(for versions/markets, where provided)
The Diesel Emissions Additive (UREA) low level
warning light
lights up if the vehicle has a low level
of UREA.
amber
VEHICLE PROTECTION SYSTEM FAULT - FIAT
CODE - ALARM FAULT (for versions/markets, where
provided - amber) - BREAK-IN ATTEMPT
Fiat CODE Vehicle protection system fault
If, with the ignition key at MAR, the warning light
stays on permanently, this indicates a possible failure
(see “Fiat Code system” in the “Know your vehicle”
section).
On some versions the display shows the dedicated
message.
WARNING Warning lights
and
will come on at
the same time to indicate a Fiat CODE system failure.
If with the engine running the warning light
flashes,
the vehicle is not protected by the engine immobiliser
(see “Fiat Code system Running section “Know your
vehicle”).
Contact a Fiat Dealership to have all the keys stored in
the memory.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
92
What it means
What to do
amber
Alarm fault
(for versions/markets, where provided)
A fault with the alarm system is signalled by this
warning light
(or symbol in the display) coming on.
A specific message is displayed on certain versions.
Contact a Fiat Dealership as soon as possible.
Break-in attempt
The warning light will blink rapidly or the symbol will
appear on the display to indicate a break-in attempt.
A specific message is displayed on certain versions.
Contact a Fiat Dealership as soon as possible.
amber
GENERAL FAILURE INDICATION
The warning light turns on in the following
circumstances:
Engine oil pressure sensor failure
The warning light switches on when an engine oil
pressure sensor anomaly is detected.
Contact a Fiat Dealership as soon as possible to have
the fault fixed.
Exterior lights failure:
On certain versions, the warning light will come
on when a failure to one of the following lights is
detected:
side lights;
brake lights;
rear fog lamps;
direction indicators;
number plate lights.
On some versions the display shows the dedicated
message.
The failure relating to these lights could be: one or more
blown bulbs, a blown protection fuse or a break in the
electrical connection.
amber
Fuel cut-off inertia switch tripped
The warning light switches on when the fuel cut-off
inertia switch is tripped. The display shows the
dedicated message.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
93
What it means
What to do
amber
Parking sensor failure
(for versions/markets, where provided)
See parking sensor warning light section.
In this case, the
warning light may not indicate a
possible problem with the airbag restraint system.
Before continuing, contact a Fiat Dealership to have the
system checked immediately.
Airbag failure warning light
The warning light
turns on and flashes to indicate
a failure of the warning light
. In this case, the
warning light may not indicate a possible problem with
the airbag restraint system.
Before continuing, contact a Fiat Dealership to have the
system checked immediately.
Start&Stop system failure
(for versions/markets, where provided)
The warning light
comes on alternatively to the
warning light when a Start&Stop system fault is
detected.
In this case, contact the Fiat Service Network as soon
as possible
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
94
What it means
What to do
amber
DPF (PARTICULATE FILTER) CLEANING UNDERWAY
(for versions/markets, where provided)
The warning light switches on when the ignition key
is turned to MAR, but it should switch off after a few
seconds.
The warning light switches on constantly to inform
the driver that the DPF system needs to eliminate
the trapped pollutants (particulate) through the
regeneration process.
A specific message will appear on the display when
the warning light comes on (for versions/markets,
where provided).
WARNING Failure to follow the required
procedure when the DPF warning light comes on
for a mileage equal to or greater than 30 km or
for a cumulative time equal to or greater than 2
hours, may result in the warning light
coming
on with consequent damage to the DPF device.
Remember that if the warning light
is on, it
is necessary to go to the Fiat Dealership to
restore the correct function of the DPF.
The warning light does not come on during every DPF
regeneration, but only when driving conditions require
that the driver is notified. The warning light will go off
if the vehicle stays in motion until regeneration has
been completed. The process normally takes about 15
minutes.
Optimum conditions for completing the process are
achieved by travelling at 60 km/h with engine revs
above 2000 rpm. If this warning light comes on, it does
not mean the vehicle is defective, so there is no need to
take it to a garage.
50) 51)
amber
ESC SYSTEM
ESC system activation
Flashing of the warning light while driving indicates the
intervention of the ESC system.
ESC system failure
The warning light switches on when the ignition key
is turned to MAR, but it should switch off after a few
seconds.
The display will show a dedicated message.
If the warning light does not go out or remains on whilst
driving, go to a Fiat Dealership.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
95
What it means
What to do
amber
HILL HOLDER FAILURE
(for versions/markets, where provided)
When the key is turned to MAR, the warning light
switches on, but it should switch off after a few
seconds; the warning light indicates a Hill Holder
system failure.
The display will show a dedicated message.
In this case, contact the Fiat Dealership as soon as
possible.
amber
iTPMS
iTPMS failure/iTPMS temporarily deactivated
The warning light flashes for about 75 seconds then
stays on constantly when a fault is detected in the
iTPMS.
In this case, contact the Fiat Dealership as soon as
possible.
Low tyre pressure
The warning light switches on to indicate that the
tyre pressure is lower than the recommended
value and/or that a pressure loss is occurring. In
these circumstances, optimal tyre duration and fuel
consumption may not be guaranteed.
In this case it is advisable to restore the correct
pressure value.
WARNING Do not continue driving with one or more flat
tyres as vehicle handling may be compromised. Stop
the vehicle, avoiding sharp braking and steering.
amber
BRAKE PAD WEAR
The warning light switches on if the front brake pads
are worn.
On certain versions a dedicated message is displayed.
Have them replaced as soon as possible.
amber
PARKING SENSOR FAILURE
(for versions/markets, where provided)
The warning light turns on when a parking sensor fault
is detected. On certain versions the
warning light
comes on instead. On certain versions a dedicated
message is displayed.
In this case, contact the Fiat Dealership as soon as
possible.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
96
What it means
What to do
amber
START&STOP SYSTEM FAILURE
(for versions/markets, where provided)
The warning light comes on when a fault is detected
in the Start&Stop system. On certain versions the
warning light comes on instead. On certain versions a
dedicated message is displayed.
In this case, contact the Fiat Dealership as soon as
possible.
amber
ASR SYSTEM DEACTIVATED
The ASR system can be turned off by pressing the
button ASR OFF. The warning light switches on to
warn the driver that the system is off. If the ASR OFF
button is pressed again, the warning light will switch
off to inform the driver that the system is on again.
amber
TRACTION PLUS SYSTEM ACTIVATION
(for versions/markets, where provided)
The warning light switches on when the Traction Plus
system is activated by pressing the T+ button on the
dashboard. The LED on the button turns on.
Traction Plus system failure
Turning the key to the MAR position, if the warning
light stays on or lights up when travelling with the LED
on the button and the warning light
.
The display will show a specific message.
In this case, contact the Fiat Dealership as soon as
possible.
amber
REAR FOG LIGHTS
The warning light comes on when the rear fog lights
are turned on.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
97
50)
During regeneration, the fan could be operated.
51)
Always drive at a speed appropriate to the traffic conditions, the weather and traffic regulations. The engine may be stopped if the
DPF light is on; however, repeated interruption of the regeneration process may result in premature deterioration of the engine oil. For this
reason, always wait until the warning light switches off before stopping the engine as described above. It is not advisable to complete DPF
regeneration with the vehicle stationary.
13)
Go to a Fiat Dealership as soon as possible if the warning light
does not light up when the key is turned to MAR or if while travelling the
warning light switches on or flashes (along with a message and a symbol on the display on some versions). The operation of the
warning
light may be checked by the traffic police using specific devices. Comply with the laws and regulations of the country where you are driving.
14)
The presence of water in the fuel supply circuit may cause severe damage to the injection system and irregular engine operation. If the
warning light switches on (on some versions together with the dedicated message on the display), contact a Fiat Dealership as soon as
possible to have the system bled. If the above indication occurs immediately after refuelling, water may have entered the tank: turn the engine
off immediately and contact a Fiat Dealership.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
98
Green warning lights
Warning lights on panel
What it means
What to do
green
SIDE LIGHTS - FOLLOW ME HOME
Side lights
The warning light switches on when the side lights are
activated.
Follow Me Home
The warning light will turn on when this device is active
(see the “Follow me home device” paragraph in the
“Know your vehicle” section). The display shows the
dedicated message.
green
LEFT-HAND DIRECTION INDICATOR (blinking)
The warning light switches on when the direction
indicator control stalk is moved downwards or,
together with the right direction indicator, when the
hazard warning light button is pressed.
green
RIGHT-HAND DIRECTION INDICATOR (blinking)
The warning light switches on when the direction
indicator control stalk is moved upwards or, together
with the left direction indicator, when the hazard
warning light button is pressed.
green
FOG LIGHTS
The warning light comes on when the front fog lights
are turned on.
green
CRUISE CONTROL
The warning light turns on together with the message
on the display when turning the ring of the Cruise
Control to ON.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
99
Blue warning lights
Warning lights on
panel
What it means
What to do
blue
MAIN BEAM HEADLIGHTS
The warning light switches on when the main beam
headlights are turned on.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
100
MESSAGES ON THE DISPLAY
What it means
What to do
GEAR SHIFT INDICATION
(for versions/markets, where provided)
On vehicles with a manual transmission, the gear shift
indicator suggests gear changes to the driver (SHIFT
UP or SHIFT DOWN) via a special display on the
instrument panel. This suggestion to change gear is
designed to improve consumption and ensure the best
driving style.
NOTE The indication in the instrument panel remains
on until the driver shifts gear or the driving conditions
go back to a situation where gearshifting is not
required to improve consumption.
START&STOP SYSTEM ACTIVATION
The symbol lights up on the display when the engine
is stopped automatically (for versions/markets, where
provided).
-------------------------------------------------------------------------------------------------------------------------------------------------------------
101
What it means
What to do
INDICATION OF DIESEL EMISSIONS ADDITIVE LOW
LEVEL (UREA)
When low UREA level is detected, a text message will
appear on the instrument panel display, together with
the symbol
to indicate that UREA must be topped
up.
The symbol
stays on until the tank is topped up
with at least 5 litres of UREA.
If you do not top up, a specific message will appear
on the instrument panel display whenever a certain
threshold is reached until it will no longer be possible
to start the engine.
A message appears continuously on the display
when the residual range is approximately 200 km
accompanied by an auditory indication.
When the residual range is 0 km, a specific message
will appear on the display (for versions/markets, where
provided). It will no longer be possible to restart the
engine after it has been stopped.
It will be possible to restart the engine after pouring at
least 5 litres of UREA in the tank.
52)
Top up the UREA tank as soon as possible with at least
5 litres of UREA. If topping up is done with remaining
range of UREA in the tank equal to zero, you may need
to wait two minutes before starting the vehicle.
NATURAL POWER SYSTEM FAILURE
All Methane fuel levels disappear on the display and
the symbol appears with a dedicated message.
In this case, contact the Fiat Dealership as soon as
possible.
FIAT CODE SYSTEM FAILURE
The symbol switches on or blinks to indicate a failure
or fault of the Fiat CODE system.
Contact a Fiat Dealership as soon as possible.
AIRBAG WARNING LIGHT FAILURE
The symbol switches on to indicate a failure of the
warning light
on the display.
Contact a Fiat Dealership as soon as possible.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
102
What it means
What to do
PETROL OPERATION (Natural Power versions)
The symbol appears on the display, with all the bar
edges, if the methane is running out (Natural Power
versions). In these cases the system automatically
switches to petrol operation.
MESSAGES ON DISPLAY (COMFORT-
MATIC/
DUALOGIC™
TRANSMISSION)
A message appears on the display in the following
cases:
incorrect use of the transmission by the driver;
manual method unavailable;
automatic mode not available;
clutch overtemperature;
starting without pressing the brake pedal;
gear unavailable;
operation not admissible;
shifting without pressing the brake pedal;
neutral engagement request (N);
52)
When the UREA tank is empty and the engine is stopped it is no longer possible to restart it until the UREA tank is topped up with at least
5 litres of UREA.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
103
SAFETY
The chapter that you are about to
read is very important: it describes the
safety systems with which the vehicle is
equipped and provides instructions on
how to use them correctly.
ABS . . . . . . . . . . . 104
ESC (Electronic Stability Control)
SYSTEM . . . . . . . . ... 105
iTPMS (indirect Tyre Pressure
Monitoring System). . . . . . 107
TRACTION PLUS SYSTEM. . .. 109
OCCUPANT PROTECTION
SYSTEMS . . . . . . . . . 109
SEAT BELTS . . . . . . . . 110
SBR SYSTEM. . . . . . . 111
PRE-TENSIONERS. . . . . . 112
CARRYING CHILDREN
SAFELY . . . . . . . . . 114
INSTALLING AN ISOFIX CHILD
RESTRAINT SYSTEM . . . . . 117
SUPPLEMENTARY RESTRAINT
SYSTEM (SRS) - AIRBAG . . . 122
FRONT AIRBAGS. . . . . ... 122
SIDE BAGS . . . . . . . ... 127
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SAFETY
104
ABS
This is an integral part of the braking
system, which prevents one or more
wheels from locking and slipping
regardless of the road surface
conditions and braking intensity,
ensuring control of the vehicle even
during emergency braking.
The Electronic Braking Force
Distribution (EBD) system completes
the system allowing the brake force to
be distributed between the front and
rear wheels.
WARNING To obtain the maximum
efficiency of the braking system, a
bedding-in period of about 500 km is
needed: during this period it is better to
avoid sharp, repeated and prolonged
braking.
SYSTEM INTERVENTION
The driver can feel that the ABS has
come into action because the brake
pedal pulsates slightly and the system
gets noisier: it means that the vehicle
speed should be altered to suit the type
of road surface.
MECHANICAL BRAKE
ASSIST
(for versions/markets, where provided)
This system (which cannot be
deactivated) recognises emergency
braking conditions according to the
speed of operation of the brake pedal
and provides an additional hydraulic
braking pressure to support that
provided by the driver. This allows
faster and more powerful operation of
the braking system.
WARNING When the Mechanical Brake
Assist intervenes, noises may be heard
from the system. This is normal. In any
case, while braking keep the brake
pedal firmly depressed.
53) 54) 55)
FAULT WARNINGS
ABS failure
This is indicated by turning on the
warning light on the instrument panel
together with a message on the display
on some versions (see the “Warning
lights and messages” paragraph in
the “Knowing the instrument panel”
chapter).
In this case, the braking system will still
be effective, although without the extra
capacity offered by the ABS.
Drive carefully to the nearest Fiat
Dealership to have the system
checked.
EBD failure
This is indicated by turning on the
and
warning lights on the
instrument panel together with a
message on the display on some
versions (see the “Warning lights and
messages” paragraph in the “Knowing
the instrument panel” chapter).
In this case, the rear wheels may
suddenly lock and the vehicle may
swerve when braking sharply. Drive
carefully to the nearest Fiat Dealership
to have the system checked.
56)
53)
When the ABS cuts in and you feel
the brake pedal pulsating, do not remove
your foot, but keep the pedal pushed
down; in doing so you, will stop in the
shortest distance possible under the road
conditions at the time.
54)
If the ABS intervenes, this indicates
that the grip of the tyres on the road is
nearing its limit: you must slow down to a
speed compatible with the available grip.
55)
The ABS gets the most from the
available grip, but it cannot improve it; you
should therefore take every care when
driving on slippery surfaces and not take
unnecessary risks.
56)
If only the
instrument panel
warning light comes on (with a message
in the multifunction display on some
versions), stop the vehicle immediately and
contact the nearest Fiat Dealership. Any
loss of fluid will affect the brake system
-------------------------------------------------------------------------------------------------------------------------------------------------------------
105
functionality, both conventional and
ant-lock wheels.
ESC (Electronic
Stability Control)
SYSTEM
(for versions/markets, where provided)
The ESC system improves the
directional control and stability of the
vehicle in various driving conditions.
The ESC system corrects understeer
and oversteer, distributing the brake
force on the appropriate wheels. The
torque supplied by the engine can also
be reduced in order to maintain control
of the vehicle.
The ESC system uses the sensors in
the vehicle to determine the trajectory
required by the driver through steering
and compares it with the real trajectory
of the vehicle.
When the real trajectory deviates from
the desired trajectory, the ESC system
intervenes to counter understeer or
oversteer.
Oversteer: occurs when the vehicle is
turning more than it should according
to the angle of the steering wheel.
Understeer: occurs when the vehicle
is turning less than it should according
to the angle of the steering wheel.
The ESC system also includes the
following systems:
Hill Holder
ASR
MSR
HBA
SYSTEM INTERVENTION
This is signalled by the flashing of the
warning light
in the instrument
panel, to inform the driver that the
vehicle is in critical stability and grip
conditions.
Switching the system on
The ESC system is automatically
activated when the vehicle is started
and cannot be deactivated.
Fault warnings
In the event of a failure, the ESC
will be automatically switched off
and the warning light
will come
on constantly in the instrument
panel along with a message in
the multifunction display (for
versions/markets where provided) (see
“Warning lights and messages” section
in the "Knowing the instrument panel"
chapter). Contact a Fiat Dealership as
soon as possible.
57) 58) 59)
HILL HOLDER SYSTEM
(for versions/markets, where provided)
It is an integral part of the ESC system
and facilitates starting on an incline.
It is automatically activated in the
following conditions:
uphill: vehicle stationary on a road
with a gradient higher than 5%, engine
running, brake pressed and gearbox
in neutral or gear (other than reverse)
engaged;
downhill: vehicle stationary on a road
with a gradient higher than 5%, engine
running, brake pressed and reverse
gear engaged.
When setting off, the ESC system
control unit maintains the braking
pressure on the wheels until the torque
necessary for starting is reached, or in
any case for a maximum of 2 seconds,
allowing your right foot to be moved
easily from the brake pedal to the
accelerator. When the 2 seconds have
elapsed, without starting, the system is
automatically deactivated, gradually
releasing the braking pressure.
During this release stage, the typical
brake disengagement noise indicating
that the vehicle is going to move
imminently will be heard.
Fault warnings
System failure is indicated by
instrument panel warning light
with
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SAFETY
106
digital display and warning light
on
the instrument panel with multifunction
display (for versions/markets, where
provided) (see "Warning lights and
messages” paragraph in the "Knowing
the instrument panel" chapter).
WARNING The Hill Holder system is
not a parking brake, therefore do not
leave the vehicle without activating the
handbrake, switching off the engine
and engaging first gear.
60)
ASR SYSTEM (Antislip
Regulation)
(for versions/markets, where provided)
This is a traction control system that
cuts in automatically every time one or
both drive wheels slip.
Depending on the slipping conditions,
two different control systems are
activated:
if the slipping involves both drive
wheels, the ASR intervenes reducing
the power transmitted by the engine;
if the slipping only involves one of
the drive wheels, the ASR intervenes
automatically braking the wheel that is
slipping.
The action of the ASR system is
especially useful in the following
conditions:
slipping of the inner wheel round
bends due to dynamic variations in the
load of excessive acceleration;
excessive power transmitted to the
wheels, also in relation to road surface
conditions;
acceleration on slippery, snowy or icy
road surfaces;
in the case of loss of grip on a wet
surface (aquaplaning).
60) 61) 62) 63)
MSR SYSTEM (engine
drive regulation)
This is an integral part of the ESC
system that, in the event of a sudden
gear down shift or an ABS braking,
cuts in and provides torque to the
engine thus preventing excessive
driving wheel drive which, especially in
poor grip conditions, can lead to a loss
of stability.
Turning the ASR system on/off
The ASR comes on automatically
whenever the engine is started.
While driving, the ASR can be switched
off and on again pressing the button
fig. 135 on the dashboard.
Switching off is shown by the warning
light
on the instrument panel
switching on together with a message
shown in the multifunction display, for
versions/markets where provided.
If the ASR is switched off while driving,
it is automatically switched on again
when the car is started up.
When travelling on snowy roads with
snow chains, it may be helpful to turn
the ASR off: in fact, in these conditions,
the driving wheels skidding when
moving off gives you better traction.
135
F0T0504
64)
FAULT WARNINGS
In the event of a failure, the ASR
will be automatically switched off
and the warning light
will come
on constantly in the instrument
panel along with a message in
the multifunction display (for
versions/markets where provided) (see
“Warning lights and messages” section
in the "Knowing the instrument panel"
chapter). In this case, contact the Fiat
Service Network as soon as possible.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст