Fiat Doblo Panorama (2019 year). Manual — part 14

MULTIMEDIA

218

CONTROLS ON THE STEERING WHEEL

The controls for the main system functions are present on the steering wheel to make control easier.

The activation of the function selected is controlled, in some cases, by how long the button is pressed (short or long press) as

described in the table below.

235

F0V0546

219

STEERING WHEEL CONTROL SUMMARY TABLE

Button

Interaction (pressure/rotation)

Acceptance of incoming call

Answering the second incoming call and putting the active call on hold

A list of the last 10 calls is displayed on the instrument panel (available in versions and markets where present)

Rejection of incoming call

Ending of call in progress

The last calls are viewed on the instrument panel only with call browsing active (available for versions and markets

where present)

deactivation/reactivation of the microphone during a phone conversation

activation/deactivation of the USB, Bluetooth® source Pause;

activation/deactivation of radio Mute function

+/–

Short press: volume increase/decrease in single steps

Long press: volume continuous increase/decrease until released

Activation of voice recognition

Interruption of the voice message in order to give a new voice command

Interruption of voice recognition

Turning right wheel upwards or downwards:

Short press (Radio mode): selection of next/previous station

Long press (Radio mode): scan higher/lower frequencies until released

Short press (USB, Bluetooth® mode): selection of previous/next track

Short press (phone mode): selection of next/previous call or text message (only with call browsing active) on the

instrument panel (available in versions and markets where present)

Long press (USB, Bluetooth® mode): fast forward/rewind until released

MULTIMEDIA

220

OPERATION

SWITCHING THE SYSTEM

ON/OFF

The system is switched on/off by

pressing the button/knob .
Turn the button/knob

clockwise

to increase the radio volume or

anticlockwise to decrease it.
The electronic volume adjustment

control rotates continuously (360°) in

both directions, without stop positions.

RADIO (TUNER) MODE

To activate Radio mode press the

RADIO button on the front panel and

the following information will appear on

the display:
At the top: the list of radio stations

stored (preset) is displayed; the station

currently playing is highlighted.
In the middle: display of the name

of the current radio station and the

buttons for selecting the previous or

next radio station.
At the bottom: display of the following

buttons:

"Browse": list of the radio stations

available;

"AM/FM", "AM/DAB", "FM/DAB":

selection of the desired frequency band

(button reconfigurable according to the

band selected: AM, FM or DAB);

"Tune" : manual radio station tuning

(not available for DAB radios);

"Info": additional information on the

source being listened to;

"Audio": access to the "Audio

settings" screen.

Audio menu

To access the "Audio" menu press the
Audio" button

on the front panel or

the "Audio" graphic button located at

the bottom of the display.

The following adjustments can be

carried out using the "Audio" menu:

"Equalizer" (for versions/markets,

where provided);

"Balance/Fade" (left/right and

front/rear audio balance adjustment);

"Volume/Speed" (excluding versions

with Hi-Fi system) speed-dependent

automatic volume adjustment;

"Loudness" (for versions/markets,

where provided);

"Auto-On Radio".

To exit the "Audio" menu, press the

/Done button.

MEDIA MODE

Press the "Source" button to select

the desired audio source among those

available: AUX (for versions/markets,

where provided), USB or Bluetooth®.

Applications used on portable devices

may be not compatible with the

Uconnect™ system.

Track selection (browse)

Use this function to scroll through and

select the tracks on the active device.

The choices available depend on the

device connected.

For example, on a USB device, you

can also use the BROWSE ENTER

button/knob to scroll through the list of

artists, genres and albums available

on the device, depending on the

information available in the tracks.

Within each list, the "ABC" button

allows the user to skip to the desired

letter in the list.

NOTE This button might be disabled for

some Apple® devices.

NOTE The BROWSE ENTER button

does not allow any operation on an

AUX device (for versions/markets,

where provided).

Press the BROWSE ENTER button

to activate this function on the source

being played.

Turn the BROWSE ENTER button/knob

to select the desired category and then

press the button/knob to confirm the

selection.
Press the

button on the front panel

to cancel the function.

221

Bluetooth® SOURCE

This mode is activated by pairing a

Bluetooth® device containing music

tracks with the system.

PAIRING A Bluetooth® AUDIO

DEVICE

To pair a Bluetooth® audio device,

proceed as follows:

activate the Bluetooth® function on

the device;

press the MEDIA button on the front

panel;

if the "Media" source is active, press

the "Source" button;

select the Bluetooth Media source;

press the "Add Device” button;

search for Uconnect™ on the

Bluetooth® audio device (during the

pairing stage a screen is displayed

showing the progress of the operation);

when requested by the audio device,

enter the PIN code shown on the

system display or confirm on the device

the PIN displayed;

if the pairing procedure is completed

successfully, a screen is displayed.

Answer "Yes" to the question to pair

the Bluetooth® audio device as

favourite (the device will have priority

over all other devices to be paired

subsequently). If "No" is selected, the

priority is determined according to the

order of connection. The last device

connected will have the highest priority;

an audio device can also be

paired by pressing the

button

on the front panel and selecting

"Phone/Bluetooth®".

WARNING If the Bluetooth®

connection between mobile phone

and system is lost, consult the mobile

phone Owner's handbook.

USB SOURCE

To enable USB mode, insert an

appropriate device into the USB port

on the vehicle.
When a USB device is inserted with the

radio on, it starts to play the tracks on

the device if the “AutoPlay” is set to ON

in the “Audio” menu.
The Uconnect™ system may not

support some USB keys: in this case,

it will not automatically switch from

“Radio” mode to “Media” mode. If the

device used does not play, verify its

compatibility by selecting Media mode:

a dedicated message will appear on

the Uconnect™ system display

AUX SOURCE

(AUX system only)
To enable AUX mode, insert an

appropriate device into the AUX socket

of the vehicle.
When a device is inserted using

the AUX output socket the system

starts reproducing the AUX source

connected, if it is already being played.
Adjust the volume using the

button/knob on the front panel or using

the volume adjustment control on the

connected device.
WARNING The functions of the device

connected with the AUX socket are

directly managed by the device itself:

it is not possible to change track

/ folder / playlist or control playing

start/end/pause with the controls on

the front panel or on the steering

wheel.
Do not leave the cable of the portable

player connected to the AUX socket

after disconnection, to avoid possible

hiss from the speakers.

PHONE MODE
PHONE MODE ACTIVATION

Press the PHONE button on the front

panel to activate the Phone mode.

NOTE To consult the list of mobile

phones and supported functions, visit

the

www.DriveUconnect.eu website

Use the buttons on the display to:

dial the phone number (using the

graphic keypad on the display);

display and call the contacts in the

mobile phone phonebook;

display and call contacts from the

registers of previous calls;

MULTIMEDIA

222

pair up to 10 phones/audio device

to make access and connection easier

and quicker;

transfer calls from the system to

the mobile phone and vice versa and

deactivate the microphone audio for

private conversations.

The mobile phone audio is transmitted

through the audio system of the

vehicle; the system automatically mutes

the radio when the Phone function is

used.

PAIRING A MOBILE PHONE

WARNING Carry out this operation only

with vehicle stationary and in safety

conditions; this function is deactivated

when the vehicle is moving.

The pairing procedure for a mobile

phone is described below: always

consult the handbook for the mobile

phone in any case.

To pair the mobile phone, proceed as

follows:

activate the Bluetooth® function on

the mobile phone;

press the PHONE button on the front

panel;

if no phone is paired with the system

yet, the display shows a dedicated

screen;

select “Yes" to start the pairing

procedure, then search for the

Uconnect™ device on the mobile

phone (if "No" is selected, the Phone

main screen is displayed);

when prompted by the mobile

phone, use its keypad to enter the PIN

code shown on the system display or

confirm on the mobile phone the PIN

displayed;

from the "Phone" screen you can

always pair a mobile phone by pressing

the "Settings" button: press the

"Add Device" button and proceed as

described above;

during the pairing stage a screen is

displayed showing the progress of the

operation;

when the pairing procedure is

completed successfully, a screen

is displayed: answer "Yes" to the

question to pair the mobile phone as

favourite (the mobile phone will have

priority over all other mobile phones

to be paired subsequently). If no other

devices are paired, the system will

consider the first associated device as

favourite.

NOTE The priority is determined

according to the order of connection

for mobile phones which are not set as

favourites. The last phone connected

will have the highest priority.

After updating the phone software, for

proper operation, it is recommended

to remove the phone from the list of

devices linked to the radio, delete the

previous system pairing also from the

list of Bluetooth® devices on the

phone and make a new pairing.

Making a phone call

The operations described below can

only be accessed if supported by the

mobile phone in use.

For all functions available, refer to the

mobile phone owner's handbook.

A call can be made by:

selecting the

icon (mobile phone

phonebook);

selecting "Recent Calls";
selecting the

icon;

pressing the "Redial" button.

SMS message reader

The system can read the messages

received by the mobile phone.

To use this function the mobile phone

must support the SMS exchange

function through Bluetooth®.

If this function is not supported by the

phone, the corresponding graphic
button

is deactivated (greyed out).

When a text message is received, the

display will show a screen where the

options "Listen", "Call" or "Ignore" can

be selected.
Press the

button to access the

list of SMS messages received by

the mobile phone (the list displays a

maximum of 60 messages received).

NOTE On some mobile phones, to

make the SMS voice reading function

223

available, the SMS notification option

on the phone must be enabled; this

option is usually available on the phone,

in the Bluetooth® connections menu

for a device registered as Uconnect™.

After enabling this function on the

mobile phone, it must be disconnected

and reconnected with the Uconnect™

system in order to make it effective.

SMS message options

Default SMS messages are stored in

the system memory and can be sent

to answer a received message or as a

new message.

Yes

No

Okay

I can't talk right now

Call me

I'll call you later

I'm on my way

Thanks

I'll be late

Stuck in traffic

Start without me

Where are you?

Are you there yet?

I need directions

I'm lost

See you later

I will be 5 (or 10, 15, 20, 25, 30, 45,

60) (*) minutes late

See you in 5 (or 10, 15, 20, 25, 30,

45, 60) (*) minutes

(*) Only use the numbers listed,

otherwise the system will not take the

message.

When receiving an SMS, the systems

also allows the same message to be

forwarded.

NOTE For details on how to send an

SMS using the voice commands, refer

to the dedicated paragraph.

BROWSING SMS

(for versions/markets, where provided)
Using the steering wheel commands,

you can view and manage the last

10 SMS messages received on the

instrument panel. To use this function

the mobile phone must support

the SMS exchange function through

Bluetooth®.
Select “Phone” on the instrument panel

menu and then select “SMS reader”

using the arrow keys on the steering

wheel controls.
The ‘SMS reader’ submenu allows the

last 10 SMS messages to be displayed.
WARNING Some mobile phones may

not take the SMS delivery confirmation

settings into account when interfacing

with Uconnect™ LIVE.
If an SMS message is sent via

Uconnect™LIVE, the user could face

an additional cost, without any warning,

due to the SMS delivery confirmation

request sent by the phone. For any

problems related to the above, contact

your telephone service provider.

"APPS" MODE

Press the APPS button on the front

panel to display the operating settings:

Outside Temperature

Clock

Compass (Uconnect™ 5” Nav LIVE

only)

Trip Computer (Uconnect™ 5” Nav

LIVE only)

Uconnect™ LIVE (where provided)

Uconnect™ LIVE

SERVICES

(where provided)
Pressing the APPS button you get

to the menu where all the application

functions of the function.
If there is a Uconnect™ LIVE icon, the

system is set up for the connected

services and allows the applications to

be used directly from the Uconnect™

menu, for more efficient and advanced

use of the car. The application

functions are present according to the

car configuration and to the market.
To use the Uconnect™ LIVE services:

download the Uconnect™ LIVE

app from the “App Store” or from

“Google play” to your compatible

smartphone making sure that data

connection is enabled; register

MULTIMEDIA

224

using the Uconnect™ LIVE app

on www.driveuconnect.eu or on

www.fiat.it; start the Uconnect™ LIVE

app on the smartphone and enter your

credentials.
For further information about the

services available in your market, visit

the www.driveuconnect.eu website.

First access to the car

Once you have launched the

Uconnect™ LIVE App and entered

your details, you have to pair the

Bluetooth® with your smartphone and

the radio, as described in the "Pairing

a mobile phone" chapter, to access

the Uconnect™ LIVE services in your

vehicle.

When pairing is complete, the

connected services can be accessed

by pressing the Uconnect™ LIVE icon

on the radio.

Before using the connected services,

you must complete the activation

procedure following the instructions

that appear in the Uconnect™ LIVE

App once the Bluetooth® pairing has

been completed

User not connected

If the device is not paired to a

Bluetooth® telephone, if the

Uconnect™ LIVE button is pressed,

the system menu has its icons

disabled, except for eco:Drive™. For

further details on the eco:Drive™

function refer to the dedicated

paragraph.

Uconnect™ LIVE services setup

using the radio

The "Settings" section can be
accessed through the

icon in

the radio menu dedicated to the

Uconnect™ LIVE services. In this

section the user can check the system

options and change them according to

their preferences.

System updates

If an update for the Uconnect™

LIVE system is available while the

Uconnect™ LIVE services are being

used, you will be informed with a

message on the radio screen.

The update includes a download of the

new software version for managing the

Uconnect™ LIVE services.

Updating is effected when using the

traffic data from the coupled smart

phone: the amount of traffic generated

will be communicated to the driver.

WARNING In order not to compromise

the proper functioning of the

Uconnect™ during installation, do not

carry out any other operations but wait

until it is finished.

App Uconnect™ LIVE

To access onboard services, you need

to have installed the Uconnect™

LIVE App on your smartphone through

which you can manage your profile and

personalise your own Uconnect™

LIVE experience.

The App can by downloaded from

"App Store" or "Google play". For

safety reasons, the App cannot be

accessed when the phone is paired

with the Uconnect™ system.

Personal details (e-mail and

password) are required to access the

Uconnect™ LIVE services using the

Uconnect™ system menu, therefore

the content of your personal accounts

is protected and can only be accessed

by the real user.

Connected services that can be

accessed on the car

The Uconnect™ LIVE services

available in the Uconnect™ system

menu can change according to the

market.

The eco:Drive™ application was

developed to improve the driving

experience and therefore it can

be used in all markets where the

Uconnect™ LIVE services are

accessible.

For further information visit the

www.driveuconnect.eu website.

eco:Drive™

The eco:Drive™ application allows

you to display your driving behaviour in

real time, in order to help you reach

a more efficient driving style as far

225

as consumption and emissions are

concerned.

In addition, the data can be saved

on a USB flash drive, and the data

analysis can be made on your personal

computer thanks to the eco:Drive™

desktop application, available on

www.DriveUconnect.eu.

Driving style is assessed by means

of four indices, which monitor the

following parameters: acceleration,

deceleration, gear shift, speed.

eco:Drive™ display

Press the eco:Drive™ button to

interact with the function.

A screen will appear on the radio

showing 4 indices: Acceleration,

Deceleration, Speed and Gear. These

indices are grey until the system has

enough data to evaluate the driving

style.

Once sufficient data are available, the

indices will have 5 colours depending

on the evaluation: dark green (very

good), light green, yellow, orange and

red (very bad).

In the event of extended inactivity the

display will show the average of the

indices up to that moment ("Average

index") then the indices will be coloured

again in real time as soon as the car is

restarted.

Recording and transferring trip

data

The trip data can be stored in the

system memory and transferred using

a suitably configured USB memory

stick or by Uconnect™ LIVE app. This

allows you to display the history of the

collected data, showing the complete

analysis of the trip data and of your

driving style.

Further information is available at

www.DriveUconnect.eu.

my:Car

my:Car allows you to keep the "health"

of your vehicle always under control.
my:Car can detect malfunction in real

time and inform the user about the

expiry of the servicing interval. Press

the "my:Car" button to interact with

the application.

The display will show a screen with the

"care:Index" section, which provides

all the detailed information about the

status of the vehicle. Press the "Active

warnings" button (if present) to show

the details of the faults of the car which

caused a warning light to switch on.

SETTINGS

Press the

button on the front panel

to display the "Settings" main menu.
NOTE The menu items displayed vary

according to the versions.

The menu includes the following items:

Language;

Display;

Units;

Voice commands;

Clock & Date;

Safety/Assistance (for

versions/markets, where provided);

Lights (for versions/markets where

provided);

Doors & Locks;

Engine Off Options;

Audio;

Phone/Bluetooth;

Radio;

Restore Settings;

Clear personal data.

NAVIGATION

154)

(Uconnect™ 5” Nav LIVE only)

Planning a route

WARNING In the interest of safety

and to reduce distractions while

you are driving, you should always

plan a route before you start driving.

Using the destination search function,

it is possible to find and reach

your destinations in different ways:

searching for a specific address, a

partial address, a specific type of

location (for example a service station

or a restaurant), a postal code, a POI

(Point Of Interest) near your current

MULTIMEDIA

226

position (for example, a restaurant with

the search type set to "nearby"), a pair

of latitude and longitude coordinates,

or by selecting a point on the

map.Select “Search” in the Main menu

and set the search for a destination.

While entering the information, the list

displays the corresponding addresses

and POIs in two separate lists.

The corresponding address and city

are displayed in the Address list and

the POI, the type of POIs and the

locations are displayed in the Point of

Interest lists.

To plan a route towards the

destination, select the “Guide” button.

A route is planned and you are guided

to your destination, using spoken

instructions and on-screen directions.

Map update

To ensure optimal performance, the

navigation system must be updated

periodically. For this, the Mopar Map

Care service offers a new map update

every three months.

The updates can be downloaded from

the maps.mopar.eu website and

installed directly on the navigator in

your vehicle. All updates are free of

charge for 3 years from the start of the

warranty on the vehicle.

The navigation system can also be

updated at the Fiat Dealership.

NOTE The dealer may charge for

updating the navigation system.

VOICE CONTROLS

NOTE For languages not supported

by the system, voice controls are not

available.
To use the voice commands, press

the button on the steering wheel

}(”Voice” button) or

and say

out loud the command you want to

activate.

Global

The following voice commands can be

given after pressing the button on the
steering wheel

:

Help

Cancel

Repeat

Voice Prompts

Phone

The following voice commands can be

given after pressing the button on the
steering wheel

:

Call

Dial

Re-dial

Call back

Recent calls

Calls made

Missed calls

Calls received

PhoneBook

Search

Show SMS

Send an SMS

Show messages

Radio

The following voice commands can be

given after pressing the button on the
steering wheel

:

Tune to FM "frequency"

Tune to AM "frequency"

Media

The following voice commands can be

given after pressing the button on the
steering wheel

:

Play song...

Play album…

Play artist…

Play genre…

Play playlist…

Play podcast…

Play audiobook…

Select the source...

View...

Navigation (Uconnect™ 5" Nav

LIVE only)

The following voice commands can be

given after pressing the button on the
steering wheel

:

Increase zoom

Decrease zoom

2D mode