Fiat Doblo Panorama (2021 year). Manual in english — page 14

MULTIMEDIA

218

Button

Interaction (pressure/rotation)

Acceptance of incoming call

Answering the second incoming call and putting the active call on hold

Rejection of incoming call

Ending of call in progress

Deactivation/reactivation of the microphone during a phone conversation

Activation/deactivation of the USB source Pause

Activation/deactivation of the Mute function on the Radio/AUX source (for versions/markets where provided)

+/

–

Turning left wheel upwards or downwards: audio volume adjustment

Short press: volume increase/decrease in single steps

Long press: volume continuous increase/decrease until released

Turning right wheel upwards or downwards:

Short press (Radio mode): selection of next/previous station

Long press (Radio mode): scan higher/lower frequencies until released

Short press (USB mode): selection of previous/next track

Long press (USB mode): fast forward/rewind until released

219

OPERATION

SWITCHING THE SYSTEM

ON/OFF

The system is switched on/off by

pressing the button/knob .
Turn the button/knob

clockwise

to increase the radio volume or

anticlockwise to decrease it.
The electronic volume adjustment

control rotates continuously (360

°

) in

both directions, without stop positions.

RADIO (TUNER) MODE

The system is equipped with the

following tuners: AM, FM and DAB (for

versions/markets, where provided).
NOTE The DAB frequency can be used

in countries where digital transmission

technology is available. The device will

not be tuned to any frequency if the

DAB button is pressed in a country

where the service is not provided

Radio mode selection

Press the RADIO button on the front

panel to activate radio mode.

Selecting a frequency band

The different tuning modes can be

selected by pressing the RADIO button

on the front panel.

Displayed information

After the desired radio station is

selected on the display, the following

information is shown (INFO mode

activated):

In the upper part:

the preset station,

the time and the other active radio

settings are highlighted (e.g.: TA).

In the central part:

the name of the

current station, the frequency and

the radio text information (if any) are

highlighted.

FM station list

Press the BROWSE ENTER

button/knob to display the complete list

of the FM stations that can be received.
The

A-B-C

button can be used,

depending on the chosen letter, to

jump alphabetically to the first of the

FM/DAB stations available for that

letter.

AM/FM radio station storage

The preset stations are available in all

system modes and are selected by

touching one of the presetting buttons

1-2-3-4-5-6

on the front panel.

If you are tuned to a radio station

that you wish to store, hold down

the button on the display which

corresponds to the desired preset

until an acoustic confirmation signal is

emitted.
The system can store up to 18 radio

stations in each mode.

AM/FM radio station selection

To search for the desired radio station

press buttons

or

or use the

wheel of the steering wheel controls

, or turn the "BROWSE/ENTER"

knob.

Previous/next radio station search

Press briefly the

or

button or

use the wheel of the steering wheel

controls

: when the button is

released the previous or next radio

station is displayed.
When searching forwards, if the system

reaches the end of the band, it will

automatically stop on the station where

the search has started from.

Previous/next radio station fast

search

Hold down the

or

button to

start the fast search: when the button

is released, the first tunable radio is

played.

DAB station list

Press the BROWSE ENTER

button/knob to display:

the list of all DAB stations;

the list of stations filtered by

"Genres";

the list of stations filtered by

"Ensembles" (broadcast group). Within

each list, the "ABC" graphic button

MULTIMEDIA

220

allows the user to skip to the desired

letter in the list.

Radio station alphabetic selection

Use the A-B-C button on the front

panel to jump alphabetically to the first

DAB station available for the chosen

letter.

MEDIA MODE

Interaction mode relating to

the USB/AUX function (for

versions/markets where provided).

Audio source selection

Press the MEDIA button to select the

desired audio source from those

available: USB/AUX SYSTEM (for

versions/markets where provided)
To select and playback music tracks

on the cell phone CD card (where the

phone allows) press the BROWSE

ENTER button, select Folders then

Card.

WARNING Some multimedia players

may not be compatible with the

Uconnect™ system.

Change track (next/previous)

Briefly press the

button or turn

the BROWSE ENTER button/knob

clockwise to play the next track or
briefly press the

button or turn

the BROWSE ENTER button/knob

anticlockwise to return to the

beginning of the selected track or to

the beginning of the previous track if

this has been played for less than 3

seconds.

Fast forward/rewind through tracks

Press and hold down the

button to

fast forward the selected track or keep
the

button pressed to fast rewind

the track.
The fast forward/rewind will stop once
the

/

button is released or when

the previous/next track is reached.

Track selection (browse)

Use this function to scroll through and

select the tracks on the active device.
The choices available depend on the

device connected.
For example, on a USB device, you

can also use the BROWSE ENTER

button/knob to scroll through the list of

artists, genres and albums available

on the device, depending on the

information available in the tracks.
Within each alphabetical list, the

A-B-

C

button on the front panel allows the

user to skip to the desired letter in the

list.
NOTE This button might be disabled for

some

Apple

® devices.

NOTE The BROWSE ENTER button

does not allow any operation on an

AUX device (for versions/markets,

where provided).
Press the BROWSE ENTER button

to activate this function on the source

being played.
Turn the BROWSE ENTER button/knob

to select the desired category and then

press the button/knob to confirm the

selection.
Press the

button to cancel the

function.
NOTE The indexing time of a USB

device can vary according to the media

inserted (in some cases it can take a

few minutes).

Track information display

To select the information displayed

while playing (Artist, Album, Genre,

Name, Folder, File name). Press the

INFO button.
Press the

button to exit the screen.

Shuffle

Press the

button to play the tracks

on USB in a random order.
The corresponding icon is displayed.
Press again to deactivate the function.

Repeat

Press the

button to activate this

function.
The corresponding icon is displayed.
Press again to deactivate the function.

221

USB SOURCE

To activate USB mode, connect the

corresponding device to the vehicle

USB port.

151)

If a USB device is connected to the

system on, this starts playing the tracks

present on the device.
The

Uconnect™

system may not

support some USB keys: in this case,

it will not automatically switch from

"Radio" mode to "Media" mode. If the

device used does not play, verify its

compatibility by selecting Media mode:

a dedicated message will appear on

the

Uconnect™

system display.

AUX SOURCE

(AUX system only)
To activate AUX mode, use a suitable

cable to connect a device to the AUX

socket of the vehicle.

152)

When you connect a device with AUX

output socket, the system starts AUX

source playback, provided that it is

already playing.
Adjust the volume using the

button/knob on the front panel or using

the volume adjustment control on the

connected device.
For the "Audio source selection"

function, see the "Media mode"

chapter.

WARNINGS
The functions of the device connected

with the AUX port are directly managed

by the device itself: it is not possible to

change track/folder/playlist or control

playing start/end/pause with the

controls on the front panel or on the

steering wheel.
Do not leave the cable of your portable

player connected to the AUX socket

after disconnection, to avoid possible

hiss from the speakers.

PHONE MODE

Phone mode activation

Press the PHONE button on the front

panel to activate the Phone mode.
The available commands can be used

to:

dial the wished phone number;

display and call the contacts in the

phonebook of the mobile phone;

display and call contacts from the

registers of previous calls;

pair up to 8 phones to make access

and connection easier and quicker;

transfer calls from the system to

the mobile phone and vice versa and

deactivate the microphone audio for

private conversations.
The mobile phone audio is transmitted

through the audio system of the

vehicle; the system automatically mutes

the radio when the Phone function is

used.

Shown on display

When a phone is connected to the

system, the display shows various

information (if available):

status of roaming;

network signal intensity;

mobile phone battery charge;

mobile phone name.

Pairing a mobile phone

To pair the mobile phone, proceed as

follows:

activate the

Bluetooth

® function on

the mobile phone;

press the

PHONE

button on the

front panel;

if no phone is paired with the system

yet, the display shows a dedicated

screen;

select "Connect Phone" to start the

pairing procedure then search for the

Uconnect™

device on the mobile

phone (if "No" is selected, the Phone

main screen is displayed);

when prompted by the mobile

phone, use its keypad to enter the PIN

code shown on the system display or

confirm on the mobile phone the PIN

displayed;

from the "Settings" menu you

can always pair a mobile phone by

MULTIMEDIA

222

selecting "Phone menu/Add phone",

then proceed as described above;

during the pairing stage a screen

appears on the display showing the

progress of the operation;
NOTE The priority for the automatic

reconnection is determined according

to the order of connection. The last

phone connected will have the highest

priority.
NOTE After updating the phone

software, for proper operation, it is

recommended to remove the phone

from the list of devices linked to the

radio, delete the previous system

pairing also from the list of

Bluetooth

®

devices on the phone and make a new

pairing.

Making a phone call

The operations described below can

only be accessed if supported by the

mobile phone in use.
For all functions available, refer to the

mobile phone owner's handbook.
A call can be made by:

selecting "Contacts" (Phonebook

. ..);

selecting "Recent Calls list";

selecting "Keypad".

Dialling the phone number using

the "keypad" on the display

Enter the phone number using the

graphic keypad displayed. Proceed as

follows:

press the PHONE button on the front

panel;

select "Keypad" on the display and

use the right "BROWSE/ENTER" knob

to enter the number

select the icon

to call.

Dialling the phone number using

the mobile phone

It is possible to dial a phone number

with the mobile phone and continue

using the system (never allow yourself

to be distracted while driving).
When a phone number is dialled with

the keypad of the mobile phone, the

audio of the call is played over the

sound system of your vehicle.

SETTINGS

Press the MENU button on the front

panel to display the "Settings" menu.
The menu includes the following items:

System Settings

Radio Settings

Radio Off Delay

Audio Settings

Phone

NOTE The menu items displayed vary

according to the versions.

151)

When connecting a device to the

USB port, make sure that it does not

obstruct the operation of the handbrake

lever.

152)

When connecting a device to the

AUX socket (for versions/markets where

provided), make sure that it does not

obstruct the operation of the handbrake

lever.

223

Uconnect™ 5" LIVE – Uconnect™ 5" NAV LIVE

CONTROLS ON FRONT PANEL

235

F0V0715

MULTIMEDIA

224

FRONT CONTROL PANEL SUMMARY TABLE

Button

Functions

Mode

1-

Switching on

Brief button press

Switching off

Brief button press

Volume adjustment

Left/right rotation of knob

2-

Volume activation/deactivation (Mute/Pause)

Brief button press

3-

Display on/off

Brief button press

4-

Settings

Brief button press

5-

Exit the selection/return to previous screen

Brief button press

6- BROWSE

ENTER

Scrolling the list or tuning to a radio station

Left/right rotation of knob

Confirmation of the option displayed

Brief button press

7- APPS

Access to the additional functions: (display of Time,

Compass, Outside temperature, Media Radio and

Uconnect™ LIVE services, if provided)

Brief button press

8- PHONE

Phone data display

Brief button press

9-

TRIP

(

Uconnect™

5”

LIVE)

Access to the Trip menu

Brief button press

9-

NAV

(

Uconnect™

5”

LIVE)

Access to the Navigation menu

Brief button press

225

Button

Functions

Mode

10- MEDIA

Support selection: USB, AUX socket (for

versions/markets, where provided)

Bluetooth

®

Brief button press

11- RADIO

Access to the Radio mode

Brief button press

MULTIMEDIA

226

CONTROLS ON THE STEERING WHEEL

The controls for the main system functions are present on the steering wheel to make control easier.
The activation of the function selected is controlled, in some cases, by how long the button is pressed (short or long press) as

described in the table below.

236

F0V0546

227

STEERING WHEEL CONTROL SUMMARY TABLE

Button

Interaction (pressure/rotation)

Acceptance of incoming call

Answering the second incoming call and putting the active call on hold

A list of the last 10 calls is displayed on the instrument panel (available in versions and markets where present)

Rejection of incoming call

Ending of call in progress

The last calls are viewed on the instrument panel only with call browsing active (available for versions and markets

where present)

deactivation/reactivation of the microphone during a phone conversation

activation/deactivation of the USB,

Bluetooth

® source Pause;

activation/deactivation of radio Mute function

+/

–

Short press: volume increase/decrease in single steps

Long press: volume continuous increase/decrease until released

Activation of voice recognition

Interruption of the voice message in order to give a new voice command

Interruption of voice recognition

Turning right wheel upwards or downwards:

Short press (Radio mode): selection of next/previous station

Long press (Radio mode): scan higher/lower frequencies until released

Short press (USB,

Bluetooth

® mode): selection of previous/next track

Short press (phone mode): selection of next/previous call or text message (only with call browsing active) on the

instrument panel (available in versions and markets where present)

Long press (USB,

Bluetooth

® mode): fast forward/rewind until released

MULTIMEDIA

228

OPERATION

SWITCHING THE SYSTEM

ON/OFF

The system is switched on/off by

pressing the button/knob .
Turn the button/knob

clockwise

to increase the radio volume or

anticlockwise to decrease it.
The electronic volume adjustment

control rotates continuously (360

°

) in

both directions, without stop positions.

RADIO (TUNER) MODE

To activate Radio mode press the

RADIO button on the front panel and

the following information will appear on

the display:

At the top

: the list of radio stations

stored (preset) is displayed; the station

currently playing is highlighted.

In the middle

: display of the name

of the current radio station and the

buttons for selecting the previous or

next radio station.

At the bottom:

display of the following

buttons:

"Browse": list of the radio stations

available;

"AM/FM", "AM/DAB", "FM/DAB":

selection of the desired frequency band

(button reconfigurable according to the

band selected: AM, FM or DAB);

"Tune" : manual radio station tuning

(not available for DAB radios);

"Info": additional information on the

source being listened to;

"Audio": access to the "Audio

Settings" screen.
NOTE The DAB frequency can be used

in countries where digital transmission

technology is available. The device will

not be tuned to any frequency if the

DAB button is pressed in a country

where the service is not provided

Audio menu

To access the "Audio" menu press the
Audio" button

on the front panel or

the "Audio" graphic button located at

the bottom of the display.
The following adjustments can be

carried out using the "Audio" menu:

"Equalizer" (for versions/markets,

where provided);

"Balance/Fade" (left/right and

front/rear audio balance adjustment);

"Volume / Speed" (excluding versions

with Hi-Fi system) speed-dependent

automatic volume adjustment;

"Loudness" (for versions/markets,

where provided);

"Auto-On Radio".

To exit the "Audio" menu, press the

/ Done button.

MEDIA MODE

Press the "Source" button to select

the desired audio source among those

available: AUX (for versions/markets,

where provided), USB or

Bluetooth®

.

Applications used on portable devices

may be not compatible with the

Uconnect™

system.

Track selection (browse)

Use this function to scroll through and

select the tracks on the active device.
The choices available depend on the

device connected.
For example, on a USB device, you

can also use the BROWSE ENTER

button/knob to scroll through the list of

artists, genres and albums available

on the device, depending on the

information available in the tracks.
Within each list, the "ABC" graphic

button allows the user to skip to the

desired letter in the list.
NOTE This button might be disabled for

some

Apple

® devices.

NOTE The BROWSE ENTER button

does not allow any operation on an

AUX device (for versions/markets,

where provided).
Press the BROWSE ENTER button

to activate this function on the source

being played.
Turn the BROWSE ENTER button/knob

to select the desired category and then

229

press the button/knob to confirm the

selection.
Press the

button on the front panel

to cancel the function.

Bluetooth® SOURCE

This mode is activated by pairing a

Bluetooth

® device containing music

tracks with the system.

PAIRING A Bluetooth® AUDIO

DEVICE

To pair a

Bluetooth

® audio device,

proceed as follows:

activate the

Bluetooth

® function on

the device;

press the MEDIA button on the front

panel;

if the "Media" source is active, press

the "Source" graphic button;

select the

Bluetooth

Media source;

press the "Add Device" graphic

button;

search for

Uconnect™

on the

Bluetooth

® audio device (during the

pairing stage a screen is displayed

showing the progress of the operation);

when requested by the audio device,

enter the PIN code shown on the

system display or confirm on the device

the PIN displayed;

if the pairing procedure is completed

successfully, a screen is displayed.

Answer "Yes" to the question to pair

the

Bluetooth

® audio device as

favourite (the device will have priority

over all other devices to be paired

subsequently). If "No" is selected, the

priority is determined according to the

order of connection. The last device

connected will have the highest priority;

an audio device can also be

paired by pressing the

button

on the front panel and selecting

"Phone/

Bluetooth

®".

WARNING If the

Bluetooth

®

connection between mobile phone

and system is lost, consult the mobile

phone Owner's handbook.

USB SOURCE

To enable USB mode, insert an

appropriate device into the USB port

on the vehicle.
When a USB device is inserted with the

radio on, it starts to play the tracks on

the device if the "AutoPlay" is set to ON

in the "Audio" menu.
The

Uconnect™

system may not

support some USB keys: in this case,

it will not automatically switch from

"Radio" mode to "Media" mode. If the

device used does not play, verify its

compatibility by selecting Media mode:

a dedicated message will appear on

the

Uconnect™

system display.

AUX SOURCE

(AUX system only)

To enable AUX mode, insert an

appropriate device into the AUX socket

of the vehicle.
When a device is inserted using

the AUX output socket the system

starts reproducing the AUX source

connected, if it is already playing.
Adjust the volume using the

button/knob on the front panel or using

the volume adjustment control on the

connected device.

WARNING The functions of the device

connected with the AUX socket are

directly managed by the device itself:

it is not possible to change track

/ folder / playlist or control playing

start/end/pause with the controls on

the front panel or on the steering

wheel.

Do not leave the cable of the portable

player connected to the AUX socket

after disconnection, to avoid possible

hiss from the speakers.

PHONE MODE

PHONE MODE ACTIVATION

Press the PHONE button on the front

panel to activate the Phone mode.

MULTIMEDIA

230

NOTE To consult the list of mobile

phones and supported functions, visit

the

www.DriveUconnect.eu website

Use the graphic buttons on the display

to:

dial the phone number (using the

graphic dial pad on the display);

display and call the contacts in the

phonebook of the mobile phone;

display and call contacts from the

registers of previous calls;

pair up to 10 phones/audio device

to make access and connection easier

and quicker;

transfer calls from the system to

the mobile phone and vice versa and

deactivate the microphone audio for

private conversations.
The mobile phone audio is transmitted

through the audio system of the

vehicle; the system automatically mutes

the radio when the Phone function is

used.

PAIRING A MOBILE PHONE

WARNING Carry out this operation only

with vehicle stationary and in safety

conditions; this function is deactivated

when the vehicle is moving.

The pairing procedure for a mobile

phone is described below: always

consult the handbook for the mobile

phone in any case.

To pair the mobile phone, proceed as

follows:

activate the

Bluetooth

® function on

the mobile phone;

press the PHONE button on the front

panel;

if no phone is paired with the system

yet, the display shows a dedicated

screen;

select "Yes" to start the pairing

procedure, then search for the

Uconnect™

device on the mobile

phone (if "No" is selected, the Phone

main screen is displayed);

when prompted by the mobile

phone, use its keypad to enter the PIN

code shown on the system display or

confirm on the mobile phone the PIN

displayed;

from the "Phone" screen you can

always pair a mobile phone by pressing

the "Settings" graphic button: press

the "Add Device" graphic button and

proceed as described above;

during the pairing stage a screen

appears on the display showing the

progress of the operation;

when the pairing procedure is

completed successfully, a screen

is displayed: answer "Yes" to the

question to pair the mobile phone as

favourite (the mobile phone will have

priority over all other mobile phones

to be paired subsequently). If no other

devices are paired, the system will

consider the first paired device as the

favourite.
NOTE The priority is determined

according to the order of connection

for mobile phones which are not set as

favourites. The last phone connected

will have the highest priority.
After updating the phone software, for

proper operation, it is recommended

to remove the phone from the list of

devices linked to the radio, delete the

previous system pairing also from the

list of

Bluetooth

® devices on the

phone and make a new pairing.

Making a phone call

The operations described below can

only be accessed if supported by the

mobile phone in use.
For all functions available, refer to the

mobile phone owner's handbook.
A call can be made by:

selecting the

icon (mobile phone

phonebook);

selecting "Recent Calls";
selecting the

icon;

pressing the "Redial" graphic button.

SMS message reader

The system can read the messages

received by the mobile phone.

231

To use this function the mobile phone

must support the SMS exchange

function through

Bluetooth

®.

If this function is not supported by the

phone, the corresponding graphic
button

is deactivated (greyed out).

When a text message is received, the

display will show a screen where the

options "Listen", "Call" or "Ignore" can

be selected.
Press the

graphic button to access

the list of text messages received by

the mobile phone (the list displays a

maximum of 60 messages received).
NOTE On some mobile phones, to

make the SMS voice reading function

available, the SMS notification option

on the phone must be enabled; this

option is usually available on the phone,

in the

Bluetooth

® connections menu

for a device registered as

Uconnect™

.

After enabling this function on the

mobile phone, it must be disconnected

and reconnected with the

Uconnect™

system in order to make it effective.

Text message options

Predefined messages are stored in the

system memory and can be sent to

answer a received message or as a

new message.

Yes

No

Okay

I can't talk right now

Call me

I'll call you later

I’m on my way

Thanks

I'll be late

Stuck in traffic

Start without me

Where are you?

Are you there yet?

I need directions

I'm lost

See you later

I will be 5 (or 10, 15, 20, 25, 30, 45,

60) (*) minutes late

See you in 5 (or 10, 15, 20, 25, 30,

45, 60) (*) minutes
(*) Only use the numbers listed,

otherwise the system will not take the

message.
When receiving a text message, the

systems also allows the same message

to be forwarded.
NOTE For details on how to send an

text using the voice commands, refer to

the dedicated paragraph.

TEXT MESSAGE

BROWSING

(for versions/markets, where provided)
Using the steering wheel commands,

you can view and manage the last

10 SMS messages received on the

instrument panel. To use this function

the mobile phone must support

the SMS exchange function through

Bluetooth

®.

Select "Phone" on the instrument panel

menu and then select "SMS reader"

using the arrow keys on the steering

wheel controls.
The ‘SMS reader’ submenu allows the

last 10 SMS messages to be displayed.

WARNING Some mobile phones may

not take the SMS delivery confirmation

settings into account when interfacing

with

Uconnect™ LIVE

.

If an SMS message is sent via

Uconnect™LIVE

, the user could face

an additional cost, without any warning,

due to the SMS delivery confirmation

request sent by the phone. For any

problems related to the above, contact

your telephone service provider.

"APPS" MODE

Press the APPS button on the front

panel to display the operating settings:

External temperature

Clock

Compass (

Uconnect™

5” Nav LIVE

only)

Trip Computer (

Uconnect™

5” Nav

LIVE only)

MULTIMEDIA

232

Uconnect™ LIVE

(where provided)

Uconnect™ LIVE

SERVICES

(where provided)
Pressing the APPS button you get

to the menu where all the application

functions of the function.
If there is a

Uconnect™

LIVE icon, the

system is set up for the connected

services and allows the applications to

be used directly from the

Uconnect™

menu, for more efficient and advanced

use of the car. The application

functions are present according to the

vehicle configuration and to the market.
To use the

Uconnect™ LIVE

services:

download the

Uconnect™ LIVE

app from the "App Store" or from

"Google play" to your compatible

smartphone making sure that data

connection is enabled; register

using the

Uconnect™ LIVE

app

on www.driveuconnect.eu or on

www.fiat.it; start the

Uconnect™ LIVE

app on the smartphone and enter your

credentials.
For further information about the

services available in your market, visit

the www.driveuconnect.eu website.

First access to the car

Once you have launched the

Uconnect™ LIVE

App and entered

your details, you have to pair the

Bluetooth

® with your smartphone and

the radio, as described in the "Pairing

a mobile phone" chapter, to access

the

Uconnect™ LIVE

services in your

vehicle.
When pairing is complete, the

connected services can be accessed

by pressing the

Uconnect™ LIVE

icon

on the radio.
Before using the connected services,

you must complete the activation

procedure following the instructions

that appear in the

Uconnect™

LIVE

App once the

Bluetooth

® pairing has

been completed

User not connected

If the device is not paired to a

Bluetooth

® telephone, if the

Uconnect™ LIVE

button is pressed,

the system menu has its icons

disabled, except for

eco:Drive™

. For

further details on the

eco:Drive™

function refer to the dedicated

paragraph.

Uconnect™ LIVE services setup

using the radio

The "Settings" section can be
accessed through the

icon in

the radio menu dedicated to the

Uconnect™ LIVE

services. In this

section the user can check the system

options and change them according to

their preferences.

System updates

If an update for the

Uconnect™

LIVE

system is available while the

Uconnect™ LIVE

services are being

used, you will be informed with a

message on the radio screen.
The update includes a download of the

new software version for managing the

Uconnect™ LIVE

services.

Updating is effected when using the

traffic data from the coupled smart

phone: the amount of traffic generated

will be communicated to the driver.

WARNING In order not to compromise

the proper functioning of the

Uconnect™

during installation, do not

carry out any other operations but wait

until it is finished.

Uconnect™ LIVE app

To access onboard services, you need

to have installed the

Uconnect™

LIVE

App on your smartphone through

which you can manage your profile and

personalise your own

Uconnect™

LIVE

experience.

The App can by downloaded from

"App Store" or "Google play". For

safety reasons, the App cannot be

accessed when the phone is paired

with the

Uconnect™

system.

233

Personal details (e-mail and

password) are required to access the

Uconnect™ LIVE

services using the

Uconnect™

system menu, therefore

the content of your personal accounts

is protected and can only be accessed

by the real user.

Connected services that can be

accessed on the car

The

Uconnect™ LIVE

services

available in the

Uconnect™

system

menu can change according to the

market.
The

eco:Drive™

application was

developed to improve the driving

experience and therefore it can

be used in all markets where the

Uconnect™ LIVE

services are

accessible.
For further information visit the

www.driveuconnect.eu website.

eco:Drive™

The

eco:Drive™

application allows

you to display your driving behaviour in

real time, in order to help you reach

a more efficient driving style as far

as consumption and emissions are

concerned.
In addition, the data can be saved

on a USB flash drive, and the data

analysis can be made on your personal

computer thanks to the

eco:Drive™

desktop application, available on

www.DriveUconnect.eu.
Driving style is assessed by means

of four indices, which monitor the

following parameters: acceleration,

deceleration, gear shift, speed.

eco:Drive™ display

Press the

eco:Drive™

graphic button

to interact with the function.
A screen will appear on the radio

showing 4 indices: Acceleration,

Deceleration, Speed and Gear. These

indices are grey until the system has

enough data to evaluate the driving

style.
Once sufficient data are available, the

indices will have 5 colours depending

on the evaluation: dark green (very

good), light green, yellow, orange and

red (very bad).
In the event of extended inactivity the

display will show the average of the

indices up to that moment ("Average

index") then the indices will be coloured

again in real time as soon as the car is

restarted.

Recording and transferring trip

data

The trip data can be stored in the

system memory and transferred using

a suitably configured USB memory

stick or by

Uconnect™ LIVE

app. This

allows you to display the history of the

collected data, showing the complete

analysis of the trip data and of your

driving style.
Further information is available at

www.DriveUconnect.eu.

my:Car
my:Car

allows you to keep the "health"

of your vehicle always under control.

my:Car

can detect malfunction in real

time and inform the user about the

expiry of the servicing interval. Press

the "

my:Car

" button to interact with

the application.
The display will show a screen with the

"care:Index" section, which provides

all the detailed information about the

status of the vehicle. Press the "Active

warnings" button (if present) to show

the details of the faults of the car which

caused a warning light to switch on.

SETTINGS

Press the

button on the front panel

to display the "Settings" main menu.
NOTE The menu items displayed vary

according to the versions.
The menu includes the following items:

Language;

Display;

Units;

Voice Commands;

Clock & Date;