Fiat Tipo 4Door (2021 year). Manual in english — page 15
MULTIMEDIA
234
USB
200
F1B0753
PHONE MODE
PHONE MODE ACTIVATION
Press the PHONE button on the front
panel to activate the Phone mode.
NOTE To consult the list of mobile
phones and supported functions, visit
the www.DriveUconnect.eu website
Use the graphic buttons on the display
to:
dial the phone number (using the
graphic dial pad on the display);
display and call the contacts in the
phonebook of the mobile phone;
display and call contacts from the
registers of previous calls;
pair up to 10 phones/audio device
to make access and connection easier
and quicker;
transfer calls from the system to
the mobile phone and vice versa and
deactivate the microphone audio for
private conversations.
The mobile phone audio is transmitted
through the car’s sound system; the
system automatically mutes the radio
when the Phone function is used.
PAIRING A MOBILE PHONE
WARNING Carry out this operation
only with car stationary and in safety
conditions; this function is deactivated
when the car is moving.
The pairing procedure for a mobile
phone is described below: always
consult the handbook for the mobile
phone in any case.
To pair the mobile phone, proceed as
follows:
activate the
Bluetooth®
function on
the mobile phone;
press the PHONE button on the front
panel;
if no phone is paired with the system
yet, the display shows a dedicated
screen;
select "Yes" to start the pairing
procedure, then search for the
device on the mobile
phone (if "No" is selected, the Phone
main screen is displayed);
when prompted by the mobile
phone, use its keypad to enter the PIN
code shown on the system display or
confirm on the mobile phone the PIN
displayed;
from the "Phone" screen you can
always pair a mobile phone by pressing
the "Settings" graphic button: press
the "Add Device" graphic button and
proceed as described above;
during the pairing stage a screen
appears on the display showing the
progress of the operation;
when the pairing procedure is
completed successfully, a screen
is displayed: answer "Yes" to the
question to pair the mobile phone as
favourite (the mobile phone will have
priority over all other mobile phones
to be paired subsequently). If no other
devices are paired, the system will
consider the first paired device as the
favourite.
NOTE After updating the phone
software, for proper operation, it is
recommended to remove the phone
from the list of devices linked to the
radio, delete the previous system
pairing also from the list of
Bluetooth®
devices on the phone and make a new
pairing.
MAKING A PHONE CALL
The operations described below can
only be accessed if supported by the
mobile phone in use.
For all functions available, refer to the
mobile phone owner's handbook.
235
selecting the
icon (mobile phone
phonebook);
selecting "Recent Calls";
selecting the
icon;
pressing the "Redial" graphic button.
TEXT MESSAGE READER
The system can read the messages
received by the mobile phone.
To use this function, the mobile phone
must support the text exchange
function through
Bluetooth®
.
If this function is not supported by the
phone, the corresponding graphic
button
is deactivated (greyed out).
When a text message is received, the
display will show a screen where the
options "Listen", "Call" or "Ignore" can
be selected.
Press the
graphic button to access
the list of text messages received by
the mobile phone (the list displays a
maximum of 60 messages received).
SERVICES
(where provided)
Press the APPS button to access the
apps.
The services available depend on the
car configuration and the market.
To use the
services, you need to download the
app from Google
Play or Apple Store and register using
the app or on www.DriveUconnect.eu.
First access to the car
Once you have launched the
App and entered
your details, you have to pair the
Bluetooth®
with your smartphone and
the radio, as described in the "Pairing
a mobile phone" chapter, to access
the
services in your
vehicle.
When pairing is complete, the
connected services can be accessed
by pressing the
icon
on the radio.
Before you can use the connected
services, complete the activation
procedure by following the instructions
that appear in the
app after having done the
Bluetooth®
pairing.
using the radio
The "Settings" section can be
accessed through the
icon in
the radio menu dedicated to the
services. In this
section the user can check the system
options and change them according to
their preferences.
System updates
If an update for the
LIVE
system is available while the
services are being
used, you will be informed with a
message on the radio screen.
Connected services that can be
accessed on the car
The eco:
Drive™
and
my:Car
applications were developed to
improve the customer's driving
experience, therefore they are available
in all markets where the
LIVE
services can be accessed.
If the navigation system is installed in
the radio, accessing the
LIVE
services enables use of the "Live"
services.
eco:Drive™
The
eco:Drive™
application allows
you to display your driving behaviour in
real time, in order to help you reach
a more efficient driving style as far
as consumption and emissions are
concerned.
Driving style is assessed by means
of four indices, which monitor the
following parameters: acceleration,
deceleration, gear shift, speed.
eco:Drive™ display
Press the
eco:Drive™
graphic button
to interact with the function.
A call can be made by:
MULTIMEDIA
236
A screen will appear on the radio
showing 4 indices: Acceleration,
Deceleration, Speed and Gear. These
indices are grey until the system
has enough data to evaluate the
driving style. Once sufficient data are
available, the indices will have 5 colours
depending on the evaluation: dark
green (very good), light green, yellow,
orange and red (very bad).
In the event of extended inactivity the
display will show the average of the
indices up to that moment ("Average
index") then the indices will be coloured
again in real time as soon as the car is
restarted.
Recording and transferring trip
data
Even though the radio contains the
feature to activate
eco:Drive™
data
recording and transfer the data to USB
or Cloud, for version or markets where
provided, it may not be usable.
SETTINGS
Press the
button on the front panel
to display the "Settings" main menu.
NOTE The menu items displayed vary
according to the versions.
The menu includes the following items:
Display;
Units;
Voice Commands;
Clock & Date;
Safety / Assistance;
Lights;
Doors & Locks;
Vehicle Off Options;
Audio;
Phone / Bluetooth;
SiriusXM Setup (where provided);
Radio Setup;
Restore Settings
Safety/Assistance
(where provided)
This function can be used to carry out
the following adjustments:
"
Rear View camera" (where
provided): this function can be used to
carry out the following adjustments:
- "Active Guidelines" (where provided):
permits the activation of dynamic grids
that indicate the route of the car on the
display.
- "Rear View cam.delay" (where
provided): permits a delay in the
disappearance of images from the
camera when reverse is disengaged.
"Forward Collision Warning" (where
provided): this function can be used
to select the Autonomous Emergency
Brake Control (AEB Control) system
intervention mode.
The options available are:
- "Off": the system is deactivated;
- "Only warning": the system intervenes
only by providing the driver with an
acoustic warning (where provided);
- "Only active braking": the system
intervenes by activating automatic
braking (where provided);
- "Warning + active braking": the
system intervenes by providing the
driver with an acoustic warning and
activating automatic braking.
"
Fwd Coll. Sensitivity" (where
provided): this function can be used to
select the "readiness" of the system to
intervene, on the basis of distance from
the obstacle.
The options available are "Near",
"Med", "Far".
"
Park Assist" (where provided): this
function can be used to select the type
of warning provided by the Park Assist
system.
The options available are:
- "Sound Only": the system warns
the driver that an obstacle is present
through acoustic warnings only, via the
speakers in the vehicle.
- "Sound & Display": the system warns
the driver that an obstacle is present
through acoustic (via the speakers in
the car) and visual (on the instrument
panel) warnings.
"
Front Park Assist vol." (where
provided): this function can be used
to select the volume of the acoustic
237
warnings provided by the front Park
Assist system.
"
Rear Park Assist vol." (where
provided): this function can be used
to select the volume of the acoustic
warnings provided by the rear Park
Assist system.
"
Park Assist vol." (where provided):
this function can be used to select
the volume of the acoustic warnings
provided by the Park Assist system.
"
Lane Control Warning (where
provided): this function can be used
to select the Lane Control system
intervention "responsiveness".
"
Lane Control Strength" (where
provided): this function can be used to
select the force to apply to the steering
wheel to put the car back in the lane
through the electric steering system
in the event of Lane Control system
intervention.
"
Blind Spot Alert" (where provided):
this function can be used to select
the type of warning ("Sound Only" or
"Sound & Display") to indicate the
presence of objects in the blind spot of
the door mirror.
"
Rain sensor" (where provided):
this function can be used to
activate/deactivate the automatic
operation of the wipers in the event of
rain.
"
Brakes" (where provided): this
function can be used to select the
following submenus:
- "Brake Service" (where provided):
allows you to activate the procedure for
carrying out braking system servicing;
- "Auto Park Brake" (where provided):
allows you to activate/deactivate the
automatic parking brake engagement.
NAVIGATION
(UConnect™ 5" Nav LIVE only)
Planning a route
WARNING In the interest of safety and
to reduce distractions while you are
driving, you should always plan a route
before you start driving.
Using the destination search function,
it is possible to find and reach
your destinations in different ways:
searching for a specific address, a
partial address, a specific type of
location (for example a service station
or a restaurant), a postal code, a POI
(Point Of Interest) near your current
position (for example, a restaurant with
the search type set to "nearby"), a pair
of latitude and longitude coordinates,
or by selecting a point on the map.
Select “Search” in the Main menu and
set the search for a destination.
While entering the information, the list
displays the corresponding addresses
and POIs in two separate lists.
The corresponding address and city
are displayed in the Address list and
the POI, the type of POIs and the
locations are displayed in the Point of
Interest lists.
To plan a route towards the
destination, select the “Guide” button.
A route is planned and you are guided
to your destination, using spoken
instructions and on-screen directions.
Map update
To ensure optimal performance, the
navigation system must be updated
periodically. For this, the Mopar Map
Care service offers a new map update
every three months.
The updates can be downloaded from
the maps.mopar.eu website and
installed directly on the
UConnect™
system. All updates are free of charge
for 3 years from the start of the
warranty on the car.
The navigation system can also be
updated at the Fiat Dealership.
NOTE The dealer may charge for
updating the navigation system.
MULTIMEDIA
238
VOICE COMMANDS
Note
For languages not supported by
the system, voice commands are not
available.
To use the voice commands, press
the button on the steering wheel
("Voice" button) and say out loud the
command you want to activate.
Global
The following voice commands can be
given after pressing the button on the
steering wheel
:
Help
Cancel
Repeat
Voice tutorial
Phone
The following voice commands can be
given after pressing the button on the
steering wheel
:
Call
Dial
Redial
Call back
Show recent calls
Show outgoing calls
Show missed calls
Show incoming calls
Phonebook
Search
Show text message
Send a text message
Show messages
Radio
The following voice commands can be
given after pressing the button on the
steering wheel
:
Tune to FM "frequency"
Tune to AM "frequency"
Tune to "radio name" FM
Tune to "radio name"
Media
The following voice commands can be
given after pressing the button on the
steering wheel
:
Play song...
Play album…
Play artist…
Play genre…
Play playlist…
Play podcast…
Play audiobook…
Select the source...
View...
LIVE only)
The following voice commands can be
given after pressing the button on the
steering wheel
:
Increase zoom
Decrease zoom
2D mode
3D mode
Add this position
Navigate home
Navigate going through home
Clear route
239
CONTROLS ON FRONT PANEL
201
P2000306
MULTIMEDIA
240
FRONT CONTROL PANEL SUMMARY TABLE
Button
Functions
Mode
Ignition
Brief button press
Switching off
Brief button press
Volume adjustment
Left/right rotation of knob
Volume activation/deactivation (Mute/Pause)
Brief button press
Display on/off
Brief button press
Exit the selection/return to previous screen
Brief button press
BROWSE ENTER
Scrolling the list or tuning to a radio station;
media source track change
radio station change if in tuner mode
Left/right rotation of knob
Confirmation of the option displayed;
display the list of stations if in Radio mode;
scroll the contents of the sources if in Media mode;
open the browsing list if in Radio or Media mode
Brief button press
241
SUMMARY TABLE OF DISPLAY BUTTONS
Graphic button
Functions
Mode
Radio
Access to the Radio mode
Press graphic button
Media
Source selection: USB,
Bluetooth®
Press graphic button
Phone
Access to the Phone mode
Press graphic button
Uconnect
Access to the system functions (Audio, Media, Phone,
Radio etc)
Press graphic button
Nav (*)
Access to the navigation function
Press graphic button
Settings
Access the settings menu
Press graphic button
Trip
Access to the Trip menu
Press graphic button
(*)
versions only
MULTIMEDIA
242
STEERING WHEEL CONTROLS
The controls for the main system functions are present on the steering wheel to make control easier.
The activation of the function selected is controlled, in some cases, by how long the button is pressed (brief or long press) as
described in the table below.
202
P2000304
243
STEERING WHEEL CONTROLS SUMMARY TABLE
Button
Interaction
Acceptance of incoming call
Acceptance of the second incoming call and putting the active call on hold
A list of the last 10 calls is displayed on the instrument panel (available in versions and markets where
present)
Activation of voice recognition
Interruption of the voice message in order to give a new voice command
Interruption of voice recognition
Long press: interaction with Siri, Apple CarPlay and Android Auto
Rejection of incoming call
Ending of call in progress
The last calls are viewed on the instrument panel only with call browsing active (available for versions
and markets where present)
Short press (phone mode): selection of next/previous call or text message (only with call browsing
active) on the instrument panel (available in versions and markets where present)
MULTIMEDIA
244
CONTROLS BEHIND THE STEERING WHEEL
Buttons
Interaction
Button 1 (steering wheel left side)
Upper button
Brief button press: search for next radio station or selection of USB next track.
Long button press: scan of higher frequencies until released/fast forward of USB
track.
Central button
With each press it scrolls through sources AM, FM, USB.
Only the available sources will be selected.
Lower button
Brief button press: search for next radio station or select USB previous track.
Long button press: scan of lower frequencies until released/fast forward of USB track.
Button 2 (steering wheel right side)
Upper button
Increasing volume
Brief button press: single volume increase
Long button press: fast volume increase
Central button
Activation/deactivation of Mute function
Lower button
Decreasing volume
Brief button press: single volume decrease
Long button press: fast volume decrease
245
SWITCHING THE SYSTEM
ON/OFF
The system is switched on/off by
pressing the button/knob .
Turn the button/knob clockwise
to increase the radio volume or
anticlockwise to decrease it. The
electronic volume adjustment control
rotates continuously (360
°
) in both
directions, without stop positions.
RADIO MODE
After the desired radio station is
selected, the following information is
shown on the display:
At the top
: the list of radio stations
stored (preset) is displayed; the station
currently playing is highlighted.
At the centre
: the name of station
being listened too is displayed.
On the left side
: the "AM", "FM",
"DAB” (for versions/markets, where
provided) buttons to select the desired
frequency band are displayed (the
button corresponding to the selected
band is highlighted).
On the right
: display of the following
buttons:
"Info": additional information on the
source being listened to;
“Map": navigation map view (versions
with
only).
At the bottom
: display of the following
buttons:
"Browse": list of the radio stations
available;
/
: selecting previous/next radio
station;
"Tune" : manual radio station tuning;
"Audio": access to the "Audio
Settings" screen.
Audio menu
To access the "Audio" menu press the
Audio" button located at the bottom of
the display.
The following adjustments can be
carried out using the "Audio" menu:
“Balance & Fader" (left/right and
front/rear audio balance adjustment);
"Equalizer" (where provided);
“Speed Adj Volume" (speed-
dependent automatic volume control);
"Loudness" (where provided);
“AutoPlay”;
"Auto-On Radio".
MEDIA MODE
Press the "Media" button to select the
desired audio source among those
available: USB and
Bluetooth®
.
WARNING Applications used
on portable devices may be not
compatible with the
system.
After Media mode is selected, the
following information is shown on the
display:
At the top
: information on the track
being played and the following graphic
buttons:
"Repeat": to repeat the track being
played;
"Shuffle": to play the tracks in
random order;
Track progress and duration.
In the middle
: information on the track
being played.
On the left
: display of the following
buttons:
Selected device or audio source;
"Select Source": select the required
audio source.
On the right
: display of the following
buttons:
"Info": additional information about
the song playing;
"Tracks": list of available tracks;
“Map": navigation map view (versions
with
only).
At the bottom
: information on the
track being played and the following
graphic buttons:
"Bluetooth”: for a
Bluetooth®
audio
source, opens the list of devices;
"Browse" for a USB source, opens
browsing;
MULTIMEDIA
246
/
previous/next track selection;
: pause track being played;
"Audio": access to the "Audio
Settings" screen.
Track selection
The “Tracks” function allows you to
open a window with the list of tracks
being played.
The choices available depend on the
device connected. For example, on
a USB device you can also use the
BROWSE ENTER button/knob
or
to scroll through the list of artists,
genres and albums available on the
device, depending on the information
present on the tracks.
Within each list, the "ABC" graphic
button allows the user to skip to the
desired letter in the list.
NOTE This button might be disabled for
some
Apple®
devices.
Bluetooth® SOURCE
This mode is activated by pairing a
Bluetooth®
device containing music
tracks with the system.
PAIRING A Bluetooth®
AUDIO DEVICE
To pair a
Bluetooth®
audio device,
proceed as follows:
activate the
Bluetooth®
function on
the device;
press the "Media" graphic button on
the display;
press the "Select Source" graphic
button;
select the
Bluetooth®
Media
source;
press the "Add Device" graphic
button;
search for
on the
Bluetooth®
audio device (during the
pairing stage a screen is displayed
showing the progress of the operation);
when requested by the audio device,
enter the PIN code shown on the
system display or confirm on the device
the PIN displayed;
if the pairing procedure is completed
successfully, a screen is displayed.
Answer “Yes” to the question to pair
the
Bluetooth®
audio device as
favourite (the device will have priority
over all other devices to be paired
subsequently). If "No" is selected, the
priority is determined according to the
order of connection. The last device
connected will have the highest priority;
an audio device can also be
paired by pressing the "Phone"
graphic button on the display and
by selecting "Settings" or selecting
"Phone/Bluetooth" from the "Settings"
menu.
NOTE When modifying the name-
device in the
Bluetooth®
settings of
the phone (where provided), the Radio
may change the track being played
if the device is connected via USB
after the
Bluetooth®
connection.
After updating the phone software, for
proper operation, it is recommended
to remove the phone from the list of
devices linked to the radio, delete the
previous system pairing also from the
list of
Bluetooth®
devices on the
phone and make a new pairing.
WARNING If the
Bluetooth®
connection between mobile phone
and system is lost, consult the mobile
phone handbook.
USB SOURCE
To activate the USB mode, insert the
corresponding USB device into the
USB port on the central console.
When a USB device is inserted with the
radio on, it starts to play the tracks on
the device if the "AutoPlay" is set to ON
in the "Audio" menu.
NOTE The Radio may change the track
being played by modifying the name-
device in the Bluetooth settings of the
phone (where provided), if the device is
connected via USB after the Bluetooth
connection.
NOTE The
system may
not support some USB keys: in this
247
case, it will not automatically switch
from “Radio” mode to “Media” mode. If
the device used does not play, verify its
compatibility by selecting Media mode:
a dedicated message will appear on
the
system display.
WARNING After using a USB charging
port, we recommend disconnecting the
device (smartphone), always removing
the cable from the vehicle port first,
never from the device fig. 203. Cables
left flying or connected incorrectly could
compromise correct recharging and/or
the USB socket condition.
NOTE The USB port handles
data transmission from the Pen
Drive/Smartphone, etc. and slow
recharging, which is not guaranteed as
it depends on the device type/brand of
the external device itself.
203
P2000248
PHONE MODE
Phone mode activation
Press the “Phone” button on the
display to activate the Phone mode.
NOTE To consult the list of mobile
phones and supported functions, visit
the www.driveuconnect.eu website
Use the graphic buttons on the display
to:
dial the phone number (using the
graphic dial pad on the display);
display and call the contacts in the
phonebook of the mobile phone;
display and call contacts from the
registers of previous calls;
pair up to 10 phones/audio device
to make access and connection easier
and quicker;
transfer calls from the system to
the mobile phone and vice versa and
deactivate the microphone audio for
private conversations.
The mobile phone audio is transmitted
through the car’s sound system; the
system automatically mutes the radio
when the Phone function is used.
Pairing a mobile phone
WARNING Carry out this operation
only with car stationary and in safety
conditions; this function is deactivated
when the car is moving.
The pairing procedure for a mobile
phone is described below: always
consult the handbook for the mobile
phone in any case.
To pair the mobile phone, proceed as
follows:
activate the
Bluetooth®
function on
the mobile phone;
press the "Phone" graphic button on
the display;
if no phone is paired with the system
yet, the display shows a dedicated
screen;
access “Settings” and select “Add
device” to start the pairing procedure,
then search for the
device
on the mobile phone;
when prompted by the mobile
phone, use its keypad to enter the PIN
code shown on the system display or
confirm on the mobile phone the PIN
displayed;
during the pairing stage a screen
appears on the display showing the
progress of the operation;
when the pairing procedure is
completed successfully, a screen
is displayed: answer "Yes" to the
question to pair the mobile phone as
favourite (the mobile phone will have
priority over all other mobile phones
to be paired subsequently). If no other
devices are paired, the system will
MULTIMEDIA
248
consider the first paired device as the
favourite.
NOTE After updating the phone
software, for proper operation, it is
recommended to remove the phone
from the list of devices linked to the
radio, delete the previous system
pairing also from the list of
Bluetooth®
devices on the phone and make a new
pairing.
Making a phone call
The operations described below can
only be accessed if supported by the
mobile phone in use. For all functions
available, refer to the mobile phone
owner's handbook.
A call can be made by:
selecting "Phonebook"
selecting "Recent"
selecting "Dial"
selecting "Redial"
Favourites
You can add a number or a contact (if
already in Contacts) to the favourite list
during a call by pressing one of the 5
"Empty" graphic buttons on the upper
part of the display. The favourites can
also be managed by using the Phone
Book options.
Text Message Reader
The system can read the messages
received by the mobile phone. To use
this function, the mobile phone must
support the text exchange function
through
Bluetooth®
.
If this operation is not supported by
the phone, the corresponding "Text
message" graphic button is deactivated
(greyed out).
When a text message is received,
the display will show a screen where
the options "Read", "Show", "Call" or
"Ignore" can be selected.
Press the "Text" graphic button to
access the list of text messages
received by the mobile phone (the list
displays a maximum of 60 messages
received).
NOTE On some mobile phones, to
make the text voice reading function
available, the text notification option
on the phone must be enabled; this
option is usually available on the phone,
in the
Bluetooth®
connections menu
for a device registered as
.
After enabling this function on the
mobile phone, it must be disconnected
and reconnected with the
system in order to make it effective.
WARNING Some mobile phones may
not take the text message delivery
confirmation settings into account
when interfacing with
.If
a text message is sent via the
system, the driver could
face an additional cost, without any
warning, due to the text message
delivery confirmation request sent by
the phone. For any problems related
to the above, contact your telephone
service provider.
"Do Not Disturb" function
If supported by the connected phone,
by pressing the "Do Not Disturb"
graphic button the user will not receive
notifications of incoming calls or text
messages. The user can reply with a
default or customized message by
means of the settings.
Text message reader
Predefined messages are stored in the
system memory and can be sent to
answer a received message or as a
new message.
Yes
No
Okay
I can't talk right now
Call me
I'll call you later
I’m on my way
Thanks
I'll be late
Stuck in traffic
Start without me
Where are you?
Are you there yet?
249
I need directions
I'm lost
See you later
I will be 5 (or 10, 15, 20, 25, 30, 45,
60) (*) minutes late
See you in 5 (or 10, 15, 20, 25, 30,
45, 60) (*) minutes
(*) Only use the numbers listed,
otherwise the system will not take
the message. When receiving a text
message, the systems also allows the
same message to be forwarded.
NOTE For details on how to send an
text using the voice commands, refer to
the dedicated paragraph.
Browsing text messages
(where provided)
Using the steering wheel commands,
you can view and manage the last
10 text messages received on the
instrument panel display. To use this
function, the mobile phone must
support the text exchange function
through
Bluetooth®
.
Select "Phone” on the instrument
panel Setup Menu and then select
"SMS reader” using the steering wheel
controls. The "SMS reader" submenu
allows the last 10 SMS messages to be
displayed.
Browsing favourites
(where provided)
Using the steering wheel commands,
you can view and manage your favorite
phone numbers on the instrument
panel display. To use this function,
the mobile phone must support
text exchange function through
Bluetooth®
and the favourite numbers
must have been saved previously as
such in the
system.
Use the steering wheel controls to
select "Phone” on the instrument panel
Setup Menu. If the phone is connected,
select the "Favourite numbers" option:
the "Favourite numbers" submenu
enables you to view and select the
favourite number.
If the "Phone" option is selected with
the phone not connected, the list of
favourite numbers cannot be viewed.
SERVICES
(where provided)
Press the
button to
access the
applications.
The application functions are present
according to the vehicle configuration
and to the market.
To use the
services, you need to download the
app from Google
Play or Apple Store and register using
the app or on www.driveuconnect.eu.
First access to the car
After starting the
app and entering your credentials,
to access the
app services in the car you need
Bluetooth®
coupling between your
smart phone and the
system as described in the "Pairing a
mobile phone" chapter. The list of
supported mobile phones is available
on www.driveuconnect.eu
After pairing, press the
button on the
display to access the connected
services.
Before using the connected services,
you must complete the activation
procedure following the instructions
that appear in the
app once the
Bluetooth®
pairing has
been completed.
services with the aid of the
Through the
services
you can access the "Settings" section
by pressing the
icon.
You can then check the system options
and change them according to your
preferences .
System updates
If an update for the
is available while the
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст