Fiat 500L Living (2022 year). Manual in english — page 9
IN AN EMERGENCY
140
BULB TYPES
Use
Type
Power
Dipped/main beam headlights
H7
55W
Daytime running lights (DRL)
LED + bulb W21W
21W
Front side lights
LED
–
Rear side lights/Brake lights
P21/5W
21W/5W
Front direction indicators
PY21W
21W
Side direction indicators
WY5W
5W
Rear direction indicators
P21W
21W
Third brake light
LED
‒
Fog lights
H11
55W
Reverse gear
W16W
16W
Rear fog light
W16W
16W
Number plate
W5W
5W
Front ceiling light
C5W
5W
Front roof lights (sun visors)
C5W
5W
Boot courtesy light
W5W
5W
Glove compartment light
C5W
5W
Rear ceiling lights
C5W
5W
-------------------------------------------------------------------------------------------------------------------------------------------------------------
141
116)
Before replacing the bulb, wait for the
exhaust ducts to cool down: DANGER OF
SCALDING!
117)
Modifications or repairs to the electric
system that are not carried out properly
or do not take the system technical
specifications into account can cause
malfunctions leading to the risk of fire.
118)
Halogen bulbs contain pressurised
gas, in the case of breakage they may
burst causing glass fragments to be
projected outwards.
119)
Only replace the light bulbs when the
engine is off and in a position that does
not interfere with traffic and lets you safely
replace them (see the description in the
"Replacement” paragraph). Also ensure
that the engine is cold, to prevent the risk
of burns.
50)
Halogen bulbs must be handled
holding the metallic part only. Touching
the transparent part of the bulb with your
fingers may reduce the intensity of the
emitted light and even reduce the lifespan
of the bulb. In the event of accidental
contact, wipe the bulb with a cloth
moistened with alcohol and let the bulb
dry.
51)
Where possible, it is advisable to have
bulbs changed at a Fiat Dealership. The
correct operation and direction of the
external lights are absolutely essential for
the safety of the car and of compliance
with the law.
REPLACING AN
EXTERNAL BULB
For the type of bulb and relevant power
rating, see the “Changing a bulb”
chapter.
UPPER FRONT LIGHT
CLUSTER
This contains the bulbs for the direction
indicators and dipped headlights.
The bulbs are arranged as follows
fig. 147:
A:
direction indicators
B:
dipped beam headlights
147
F0Y0021C
DIRECTION INDICATORS
To replace the bulb, proceed as
follows:
remove the cover (A) fig. 147;
turn the bulb holder (B) fig. 148
anticlockwise, extract the bulb (C) and
replace it;
refit the new bulb on the bulb holder,
making sure it is correctly locked;
148
F0Y0022C
refit the bulb holder in its housing
and turn it clockwise, until the locking
click is heard;
then refit the cover (A) fig. 147.
DIPPED BEAM
HEADLIGHTS
To replace the bulb, proceed as
follows:
remove the cover (B) fig. 147;
remove the connector and bulb
holder (C) fig. 149 unit, releasing it
outwards;
extract the bulb (D) from the
connector (E ) and replace it;
refit the new bulb on the connector,
making sure it is correctly locked;
-------------------------------------------------------------------------------------------------------------------------------------------------------------
IN AN EMERGENCY
142
refit the connector and bulb holder
unit (C) in its housing;
149
F0Y0023C
then refit the cover (B) fig. 147.
LOWER FRONT LIGHT
CLUSTER
This contains the bulbs for the main
beams and side lights/daytime running
lights (DRL).
The bulbs are arranged as follows
fig. 150:
C:
main beam headlights
D:
side lights/daytime running lights
(DRL)
150
F0Y0499C
MAIN BEAM HEADLIGHTS
To replace the bulb, proceed as
follows:
For 500L versions:
steer the wheel
fully inwards, undo the screws (A)
fig. 151 and move the wheel arch cover
in order to access the bulb;
151
F0Y0155
For 500L CROSS/PRO CROSS
versions:
steer the wheel fully inwards,
open the external, lower and internal
wheel arch cover fasteners (A) fig. 152;
152
F0Y0161
remove the cover (C) fig. 150;
remove the connector and bulb
holder (D) fig. 153 unit, releasing it
outwards;
153
F0Y0025C
extract the bulb (E) from the
connector (F) and replace it;
refit the new bulb on the connector,
making sure it is correctly locked;
refit the connector and bulb holder
unit (D) in its housing;
-------------------------------------------------------------------------------------------------------------------------------------------------------------
143
refit the cover (C);
refit the wheel arch or locary and
tighten the screws (A) fig. 151 -
fig. 152.
For 500L CROSS/PRO CROSS
versions:
during reassembly, take care
to insert the wheel arch cover correctly
in the lower zone of the front bumper.
SIDE LIGHTS/DAYTIME
RUNNING LIGHTS (DRL)
Side lights/daytime running lights
(DRL) (versions with LED lights)
For light replacement, contact a Fiat
Dealership.
Daytime running lights (DRL)
(versions with incandescent bulb)
To replace the bulb, proceed as
follows:
For 500L PRO versions:
steer the
wheel fully inwards, undo the screws
(A) fig. 151 and move the wheel arch
cover in order to access the bulb;
For 500L CROSS/PRO CROSS
versions:
steer the wheel fully inwards,
open the external, lower and internal
wheel arch cover fasteners (A) fig. 152;
turn the bulb holder (E) fig. 154
anticlockwise, extract the bulb (F) from
the connector (G) and replace it;
refit the new bulb on the connector,
making sure it is correctly locked;
154
F0Y0026C
refit the bulb holder unit (E) in its
housing and turn it clockwise, until the
locking click is heard;
refit the cover (D);
refit the wheel arch or locary and
tighten the screws (A) fig. 157 -
fig. 158.
For 500L CROSS/PRO CROSS
versions:
during reassembly, take care
to insert the wheel arch cover correctly
in the lower zone of the front bumper.
SIDE DIRECTION
INDICATORS
To replace the bulb, proceed as
follows:
adjust the lens (A) fig. 155 to
compress in the clip (B) fig. 156, then
pull the cluster outwards;
turn the bulb holder (C)
anticlockwise, extract the bulb (D) and
replace it;
refit the bulb holder (C) on the lens
(A) fig. 155 and turn it clockwise;
155
F0Y0147C
156
F0Y0171C
refit the cluster making sure that
the internal clip (B) fig. 156 clicks into
position.
FOG LIGHTS
(for versions/markets, where provided)
To replace the bulb, proceed as
follows:
For 500L PRO versions:
steer the
wheel fully inwards, undo the screws
-------------------------------------------------------------------------------------------------------------------------------------------------------------
IN AN EMERGENCY
144
For 500L PRO versions:
steer the
wheel fully inwards, undo the screws
(A) fig. 157 and move the wheel arch
cover in order to access the bulb;
157
F0Y0155
For 500L CROSS/PRO CROSS
versions:
steer the wheel fully inwards,
open the external, lower and internal
wheel arch cover fasteners (A) fig. 158;
158
F0Y0161
adjust the clip (C) fig. 159 and
disconnect the electrical connector (D);
turn and remove the bulb holder (E);
159
F0Y0033C
release the bulb and replace it;
refit the new bulb and carry out the
procedure described previously in
reverse;
refit the wheel arch or locary and
tighten the screws (A) fig. 157 -
fig. 158.
For 500L CROSS/PRO CROSS
versions:
during reassembly, take care
to insert the wheel arch cover correctly
in the lower zone of the front bumper.
REAR LIGHT CLUSTERS
These contain the bulbs for the side
lights, brake lights and direction
indicators. To replace the bulbs,
proceed as follows:
take the hex wrench (A) fig. 160
provided;
operate tab (B) fig. 161 and remove
protective cover (C) (located in the side
area of the boot);
160
F0Y0149C
161
F0Y0150C
use hex wrench (A) to unscrew fixing
devices (D) fig. 162 of the rear light
cluster;
extract the light cluster by removing
it with both hands in the direction
indicated by the arrows fig. 163;
(A) fig. 157 and move the wheel arch
cover in order to access the bulb;
-------------------------------------------------------------------------------------------------------------------------------------------------------------
145
162
F0Y0258C
163
F0Y0151C
disconnect the electrical connector,
undo the fixing screws (E) fig. 164 and
remove the bulb holder assembly;
164
F0Y0027C
then replace the bulb concerned
fig. 165: (F) direction indicators, (G)
side/brake lights.
165
F0Y0028C
FIXED REAR LIGHT
CLUSTERS
These contain the rear fog light bulbs
(left side) and reversing light bulbs (right
side).
WARNING Take particular care when
replacing the rear fog light bulb: RISK
OF BURNS if the exhaust pipe is hot
500L PRO versions
To replace the bulb, proceed as
follows:
working underneath the rear bumper,
release the tab (A) fig. 166, undo the
fixing screw (B) and remove the flap (if
present);
disconnect the electrical connector
(C), rotate the bulb/bulb holder unit (D)
fig. 167 anticlockwise and remove the
unit;
166
F0Y0634C
-------------------------------------------------------------------------------------------------------------------------------------------------------------
IN AN EMERGENCY
146
167
F0Y0635C
release the bulb and replace it;
reinsert the bulb/bulb holder unit (D)
by turning it clockwise;
reconnect the electrical connector
(C);
refit the flap and check that it is
correctly locked;
tighten the fixing screw (B).
THIRD BRAKE LIGHTS
These are LEDs. They are located in
the tailgate. For replacement, contact a
Fiat Dealership.
NUMBER PLATE LIGHTS
To replace the bulbs, proceed as
follows:
remove lens (A) fig. 168;
168
F0Y0030C
change the bulb (B) fig. 169,
releasing it from the side contacts;
169
F0Y0031C
insert the new bulb and make sure
that it is correctly clamped between the
contact and refit the lens (A) fig. 168
REPLACING
INTERIOR BULBS
FRONT CEILING LIGHT
Versions without rear seat
surveillance mirror
To change the bulbs, proceed as
follows:
remove the ceiling light (A) fig. 170
working at the points indicated by the
arrows;
170
F0Y0193
undo the bulb housings (B) fig. 171
and remove them by extracting
outwards: then replace bulbs (C);
correctly fit the new bulbs in the
relevant housings (B);
fit ceiling light (A) fig. 170 in its
housing making sure it is locked.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
147
171
F0Y0192
Versions with rear seat surveillance
mirror
(for versions/markets, where provided)
To change the bulbs, proceed as
follows:
work in zone (A) and bring mirror (B)
in operating position;
172
F0Y0224
undo the screw and remove fixing
covering cap (C) fig. 172;
working from the rear area pull the
roof light downwards and release it
To refit it, carry out the steps in the
reverse order.
For bulb replacement, refer to the
"Versions without rear seat surveillance
mirror" paragraph.
Versions with fixed glass roof or
electric sunroof
To remove the courtesy light and
replace the bulbs, contact a Fiat
Dealership.
REAR CEILING LIGHT
Versions without sunroof
To change the bulbs, proceed as
follows:
operate in the point shown by the
arrow and remove roof light (A) fig. 173;
173
F0Y0103
open flap (C) fig. 174 and replace
bulb (B), releasing it from the side
contacts.
insert the new bulb and make sure
that it is correctly clamped between the
contacts.
174
F0Y0104
refit the ceiling light (A) fig. 173 by
inserting it in its correct position firstly
on one side and then pressing on the
other until it clicks into place.
Versions with sunroof
(for versions/markets, where provided)
To replace the bulbs, proceed as
follows:
operate in the point shown by the
arrow and remove roof light (A) fig. 175;
change the bulb (B) fig. 176,
releasing it from the side contacts;
insert the new bulb and make sure
that it is correctly clamped between the
contacts.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
IN AN EMERGENCY
148
175
F0Y0261
176
F0Y0194
refit the ceiling light (A) fig. 175 by
inserting it in its correct position firstly
on one side and then pressing on the
other until it clicks into place.
500L LIVING versions (7-seater)
(for versions/markets, where provided)
To replace the bulb, proceed as
follows:
operate in the point shown by the
arrow and remove roof light (A) fig. 177;
open flap (C) fig. 178 and replace
bulb (B), releasing it from the side
contacts.
177
F0Y0152
insert the new bulb and make sure
that it is correctly clamped between the
contacts;
refit the ceiling light (A) by inserting it
in its correct position firstly on one side
and then pressing on the other until it
clicks into place.
ROOF LIGHT
178
F0Y0104
BOOT
To replace the bulb, proceed as
follows:
open the boot and remove the
courtesy light (A) fig. 179 (500L
versions) or fig. 180 (500L LIVING
versions), working at the point shown
by the arrow;
open the protection (B) and replace
the bulb;
close the cover (B) on the lens;
refit the ceiling light (A) by inserting it
in its correct position firstly on one side
and then pressing on the other until it
clicks into place.
179
F0Y0105
-------------------------------------------------------------------------------------------------------------------------------------------------------------
149
180
F0Y0380
GLOVE COMPARTMENT
LIGHT
To change the bulbs, proceed as
follows:
open the glove compartment and
extract the ceiling light (A) fig. 181;
open the protection (B) and replace
the bulb;
close the cover (B) on the lens;
181
F0Y0106
refit the ceiling light (A) by inserting it
in its correct position firstly on one side
and then pressing on the other until it
clicks into place.
FUSES
For fuse replacement, contact a Fiat
Dealership.
120) 121) 122) 123) 124) 125) 126)
GENERAL INFORMATION
Fuses protect the electrical system:
they intervene (blow) in the event of
a failure or improper action on the
system.
Check the state of the corresponding
fuse when a device does not work: the
filament (A) fig. 182 should be intact.
If it is not, replace the blown fuse with
another with the same ampere rating
(same colour).
182
F0Y0091
B = intact fuse;
C = fuse with damaged filament.
FUSE LOCATION
Fuses are grouped together in three
fuseboxes located in the engine
compartment, under the dashboard
and inside the boot.
ENGINE COMPARTMENT
JUNCTION BOX
To access the fuses unscrew the two
screws (A) fig. 183 and remove the
cover (B) in the direction shown by the
arrow.
183
F0Y0071C
WARNING Before removing cover (B)
fig. 183 press and turn the two bayonet
screws (A) slowly anticlockwise (using
the flat tip screwdriver provided) until
unlocking them. This is shown by the
screw heads lifting.
After replacing the fuse, make sure you
close cover (B) on the junction unit. The
-------------------------------------------------------------------------------------------------------------------------------------------------------------
IN AN EMERGENCY
150
fusebox fig. 184 is located by the side
of the battery.
184
F0Y0072C
120)
For fuse replacement, contact a Fiat
Dealership.
121)
If the replaced fuse blows again,
contact a Fiat Dealership.
122)
Never replace a faulty fuse with metal
wires or anything else.
123)
Never replace a fuse with another
with a higher amp rating; RISK OF FIRE.
124)
If a general fuse (MEGA-FUSE, MIDI-
FUSE, MAXI-FUSE) blows contact a Fiat
Dealership.
125)
Before replacing a fuse, make sure
that the ignition key has been removed
and that all the other services are switched
off and/or disengaged.
126)
Contact Fiat Dealership if a safety
system (airbags, brakes), engine system
(engine, transmission) or steering system
general protection fuse blows.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
151
DASHBOARD FUSE BOX
The fusebox is located on the left side of the dashboard. To access the fuses, remove flap (A) fig. 185.
185
F0Y0280C
-------------------------------------------------------------------------------------------------------------------------------------------------------------
IN AN EMERGENCY
152
ACCESS TO
DASHBOARD FUSES
(right-hand drive
versions)
To access the fuses, proceed as
follows:
open the glove compartment
downwards;
use the screwdriver provided fig. 186
to remove the two side devices A
fig. 187;
186
F0Y0236C
187
F0Y0235C
press on the devices B fig. 188 at the
sides of the glove compartment;
188
F0Y0238C
pull the cover C fig. 189 towards
you to remove it. This makes the fuses
fig. 190 accessible, and the blown fuse
can be replaced.
189
F0Y0239C
After replacing the blown fuse, refit the
cover C and repeat the above steps in
reverse.
190
F0Y0237C
Take special care to position the
devices B correctly.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
153
BOOT FUSEBOX
The fusebox is located on the left side of the luggage compartment. To access the fuses operate in the point shown by the
arrow and remove flap (A) fig. 191.
191
F0Y0177C
-------------------------------------------------------------------------------------------------------------------------------------------------------------
IN AN EMERGENCY
154
ENGINE COMPARTMENT FUSE BOX
fig. 184
USERS
FUSE
AMPERE
Horn
F10
10
Heated rear window
F20
30
Cigar lighter/Front power socket
F85
15
USB charging port (for versions/markets, where provided);
F86
7.5
Door mirror defrosters
F88
7.5
-------------------------------------------------------------------------------------------------------------------------------------------------------------
155
DASHBOARD FUSE BOX
fig. 185
USERS
FUSE
AMPERE
Rear electric window (left side)
F33
20
Rear electric window (right side)
F34
20
Uconnect™
, rear courtesy lights (right and left)
F36
15
Central locking
F38
20
Two-way windscreen washer pump
F43
20
Front electric window (driver side)
F47
20
Front electric window (passenger side)
F48
20
Main beam headlight (left side)
F90
7.5
Main beam headlight (right side)
F91
7.5
Fog light (left side)
F92
7.5
Fog light (right side)
F93
7.5
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст