Fiat Ulysse (2022 year). Manual in english — page 19

292

Connect Nav

Select "

Setting the time-date

".

Select "

Date

".

Press this button to set the date.

Press "

OK

" to confirm.

Select the display format for the date.

Time and date setting is only available if
"GPS synchronisation" is deactivated.

Setting the time

Press

Settings

to display the main page.

Press the "

OPTIONS

" button to access the

secondary page.

Select "

Setting the time-date

".

Select "

Time

".

Press this button to set the time using the
virtual keypad.
Press "

OK

" to confirm.

Press this button to set the time zone.

Select the display format for the time
(12h/24h).

Activate or deactivate summer time (+1

hour).

Activate or deactivate GPS

synchronisation (UTC).

Press "

OK

" to confirm.

The system may not automatically
manage the change between winter and

summer time (depending on the country of
sale).

Colour schemes

Depending on equipment/Depending on version.

As a safety measure, the procedure for

changing the colour scheme is only

possible when the

vehicle is stationary

.

Press

Settings

to display the main page.

Select "

Color schemes

".

Select a colour scheme in the list then
press "

OK

" to confirm.

Whenever the colour scheme is
changed, the system restarts, temporarily

displaying a black screen.

Frequently asked
questions

The following information groups together the
answers to the most frequently asked questions
concerning the system.

Navigation

I cannot enter the navigation address.

The address is not recognised.

► Use the "intuitive method" by pressing

the "Search…" button at the bottom of the
"Navigation” page.

The route calculation is not successful.

The route settings may conflict with the current

location (for example, if toll roads are excluded
but the vehicle is on a toll road).

► Check the route settings in the "Navigation"

menu.

I am not receiving "Danger zone" alerts.

You have not subscribed to the online services
option.

► If you have subscribed to the option:

- a few days may elapse before the service is
activated,
- services may not be selected in the system
menu,
- online services are not active ("TOMTOM
TRAFFIC" not shown on the map).

The POIs do not appear.

The POIs have not been selected.

► Set the zoom level to 200 metres (656 ft), or

select POIs from the POI list.

The "Danger zone" audible warning feature is

not working.

The audible warning is not active or the volume
is too low.

14/02/2022 15:34:25

293

Connect Nav

12

► Activate the audible warning in the

"Navigation" menu and check the voice volume
in the sound settings.

The system does not suggest a detour

around an incident on the route.

The route settings do not take account of TMC
messages.

► Configure the "Traffic info" function in the

route settings list (None, Manual or Automatic).

I am receiving a "Danger zone" alert which is

not on my route.

As well as providing guided navigation, the
system announces all "Danger areas" positioned
in a cone located in front of the vehicle. It may
provide an alert for "Danger areas" located on
nearby or parallel roads.

► Zoom the map to show the exact location

of the "Danger area". You can select "On the
route" to stop receiving warnings or decrease the
warning duration.

Certain traffic jams along the route are not

indicated in real time.

On starting, a few minutes may elapse before

the system begins to receive traffic information.

► Wait until traffic information is being received

correctly (traffic information icons shown on the

map).
In certain countries, only major routes

(motorways, etc.) are listed for the traffic

information.
This is perfectly normal. The system is

dependent on the traffic information available.

The altitude is not displayed.

On starting, GPS initialisation may take up to
3 minutes to receive more than 4 satellites
correctly.

► Wait until the system has started up

completely so that there is GPS coverage by at
least 4 satellites.
Depending on the geographical environment
(tunnel, etc.) or the weather, the conditions of
reception of the GPS signal may vary.
This behaviour is normal. The system is
dependent on the GPS signal reception
conditions.

My navigation is no longer connected.

During start-up and in certain geographical
areas, the connection may be unavailable.

► Check that the online services are activated

(settings, contract).

Radio

The reception quality of the radio station

being listened to gradually deteriorates or

the station presets are not working (e.g. no

sound, "87.5" MHz is displayed).

The vehicle is too far from the selected station’s
transmitter, or no transmitter is present in the
geographical area.

► Activate the "RDS" function by means of the

short-cut menu to enable the system to check
whether there is a more powerful transmitter in
the geographical area.
The aerial is missing or damaged (e.g. when
going through a car wash or in an underground
car park).

► Have the aerial checked by a dealer.

The surrounding area (e.g. hill, building, tunnel,
underground car park, etc.) is blocking reception,
including in RDS tracking mode.
This is a perfectly normal phenomenon, and is
not indicative of an audio system malfunction.

I cannot find some radio stations in the list of

stations received.

The name of the radio station changes.

The station is no longer received or its name has
changed in the list.
Some radio stations send other information
in place of their name (the title of the song for
example).
The system interprets these details as the station
name.

► Press "Update list" in the "Radio stations"

secondary menu.

Media

Playback of my USB memory stick starts only

after a very long wait (around 2 to 3 minutes).

Some files supplied with the memory stick may

greatly slow down access to reading the memory
stick (multiplication by 10 of the cataloguing
time).

► Delete the files supplied with the memory

stick and limit the number of sub-folders in the

file structure on the memory stick.

There may be an extended pause after

inserting a USB stick.

14/02/2022 15:34:25

294

Connect Nav

The system reads a variety of data (folder, title,
artist, etc.). This can take from a few seconds to
a few minutes.
This is perfectly normal.

Some characters in information about the

currently playing media may not be displayed

correctly.

The audio system is unable to process certain
types of character.

► Use standard characters to name tracks and

folders.

Playback of streaming files does not start.

The connected device does not automatically
launch playback.

► Start playback from the device.

Track names and playing times are not

displayed on the audio streaming screen.

The Bluetooth profile does not allow the transfer

of this information.

Telephone

I am unable to connect my Bluetooth

telephone.

The telephone's Bluetooth function may be

switched off or the device may not be visible.

► Check that the telephone has Bluetooth

switched on.

► Check in the telephone settings that it is

"visible to all".

► Deactivate then reactivate the telephone’s

Bluetooth function.
The Bluetooth telephone is not compatible with
the system.

► You can check the compatibility of the

telephone on the Brand's website (services).

Android Auto and/or CarPlay do not work.

Android Auto and CarPlay may not activate if the
USB cables are of poor quality.

► Use genuine USB cables to ensure

compatibility.

Android Auto and/or CarPlay do not work.

Android Auto and CarPlay are not available in all
countries.

► Check the list of supported countries via

these websites: Google Android Auto or Apple.

The volume of the telephone connected via

Bluetooth is too low.

The volume depends on both the system and the
telephone.

► Increase the volume of the audio system, to

maximum if required, and increase the volume of
the telephone if necessary.

Ambient noise affects the quality of the

telephone call.

► Reduce ambient noise (e.g. close the

windows, reduce ventilation, slow down).

Some contacts are duplicated in the list.

The options for synchronising contacts are:
synchronise the contacts on the SIM card, the
contacts on the telephone, or both. When both
synchronisations are selected, some contacts
may be duplicated.

► Select "Display SIM card contacts" or

"Display telephone contacts".

The contacts are not listed in alphabetical

order.

Some telephones offer display options.

Depending on the settings chosen, contacts can

be transferred in a specific order.

► Modify the telephone directory display

settings.

The system is not receiving SMS text

messages.

Bluetooth mode does not allow SMS text
messages to be sent to the system.

Settings

When the treble and bass settings are

changed, the ambience is deselected.

When the ambience is changed, the treble

and bass settings are reset.

Selecting an ambience imposes the treble and
bass settings, and vice versa.

► Modify the treble and bass or ambience

settings to obtain the desired musical ambience.

When the balance settings are changed, the

distribution is deselected.

When the distribution setting is changed, the

balance settings are deselected.

Selecting a distribution setting imposes the
balance settings, and vice versa.

► Modify the balance setting or the distribution

setting to obtain the desired sound quality.

There is a difference in sound quality

between audio sources.

To allow for optimal listening quality, the sound

settings can be tailored to different audio

sources, which can generate audible differences

when changing source.

14/02/2022 15:34:25

295

Connect Nav

12

► Check that the sound settings are appropriate

to the sources listened to. We recommend
setting the sound functions (Bass, Treble,
Balance) to the middle position, setting the
musical ambience to "None", setting loudness
correction to "Active" in USB mode and "Inactive"
in Radio mode.

► In all cases, after applying sound settings,

adjust the volume level on the portable device (to

a high level) first. Then adjust the volume level

on the audio system.

When the engine is off, the system switches

off after several minutes of use.

When the engine is switched off, the system's

operating time depends on the state of charge of
the battery.

The switch-off is normal: the system

automatically goes into energy economy mode

and switches off to maintain an adequate charge

in the battery.

► Start the vehicle’s engine to increase the

charge of the battery.

The date and time cannot be set.

Date and time settings are only available if
satellite synchronisation is deactivated.

► Settings menu/Options/Date-Time Setting.

Select the "Time" tab and deactivate "GPS
synchronisation" (UTC).

14/02/2022 15:34:25

296

Event data recorders

Recording event data

Electronic control units are installed in your
vehicle. These control units process data
received from the vehicle's sensors, for example,
or data they generate themselves or exchange
with each other. Some of these control units are
required for the correct operation of your vehicle,
some others assist you while driving (driving or
manoeuvring aids), while others provide comfort
or infotainment functions.
The following contains general information about
how data is processed within the vehicle.

You will find additional information about the

specific data which is downloaded, stored

and transmitted to third parties and what it is
used for in your vehicle under the keyword
"Data protection". This information is directly
associated with the references for the functions
in question contained in the corresponding
vehicle handbook, or in the general terms and
conditions of sale.
This information is also available online.

Vehicle operating data

The control units process the data used for the
operation of the vehicle.
This data includes, for example:
– Information about the state of the vehicle
(e.g. speed, travel time, lateral acceleration,
wheel rotation rate, fastened seat belts display).
– Environmental conditions (e.g. temperature,
rain sensor, distance sensor).

As a general rule, this data is temporary, is
not stored for longer than one operating cycle
and is only used within the vehicle itself. The
control units often record this data (including the
vehicle's key). This function allows either the
temporary or permanent storage of information
about the state of the vehicle, stresses on
components, servicing requirements, as well as
events and technical errors.
Depending on the vehicle's equipment level, the
data stored is as follows:
– Operating state of system components

(e.g. filling level, tyre pressures, battery charge

status).
– Faults and malfunctions in important system
components (e.g. lamps, brakes).

– System reactions in specific driving situations

(e.g. deployment of an airbag, triggering of
stability control and braking systems).
– Information about events which have
damaged the vehicle.
– For electric and rechargeable hybrid vehicles,
the traction battery charge level and the
estimated driving range.
In particular circumstances (e.g. if the vehicle
has detected a malfunction), it may be necessary
to record data which would otherwise simply not
be stored.
When taking your vehicle in for servicing
(e.g. repairs, maintenance), the stored operating
data may be read along with the vehicle's

identification number and used if necessary.

The personnel working for the servicing network

(e.g. garages, manufacturers) or third parties
(e.g. roadside assistance agents) may read
the vehicle's data. This also applies to work
carried out under warranty and quality assurance
measures.
This data is generally read via the OBD

(On-Board Diagnostics) port fitted by law to

the vehicle. It is used to report on the technical
state of the vehicle or its components and
facilitates the diagnosis of malfunctions, in
compliance with warranty obligations and for
quality improvement. This data, in particular the
information relating to stress on components,
technical events, operator errors and other
malfunctions, is sent to the Manufacturer, if

necessary, along with the vehicle's identification

number. The Manufacturer's liability may also be
engaged. The Manufacturer may also use the
operating data taken from the vehicle for product
recalls. This data may also be used to check the
customer's warranty and any claims made under
warranty.
Any malfunctions stored in the vehicle may be
reset by an after-sales service company during
servicing or repair work, or at your request.

Comfort and infotainment

functions

Comfort settings and personalised settings

may be saved in the vehicle and modified or

reinitialised at any time.

14/02/2022 15:34:25

297

Event data recorders

13

Depending on the vehicle's equipment level, this
may include:
– Seat and steering wheel position settings.
– Chassis and air conditioning settings.
– Personalised settings such as the interior
lighting.
You can enter your own data into the functions
of your vehicle's audio and telematic system, as
part of the selected functionalities.
Depending on the vehicle's equipment level, this
may include:
– Multimedia data such as music, videos or
photos to be read by an integrated multimedia
system.
– Address book data to be used with an
integrated hands-free system or with an
integrated navigation system.
– Entered destinations.
– Data regarding the use of online services.
This data for the comfort and infotainment
functions may be stored locally in the vehicle
or saved to a device that you have connected
to the vehicle (e.g. smartphone, USB memory
stick or MP3 player). Data that you have entered
yourself may be deleted at any time.
This data may also be transmitted outside the
vehicle at your request, particularly when using
online services in line with the settings that you
have selected.

Smartphone integration

(e.g. Android Auto

®

or

Apple

®

CarPlay

®

)

If your vehicle is equipped accordingly, you can
connect your smartphone or another mobile
device to the vehicle in order to operate it using
the vehicle's integrated controls. Images and
sounds from the smartphone can be transmitted
through the audio and telematics system.

Specific information is simultaneously sent

to your smartphone. Depending on the type
of integration, this includes data such as location,
day/night mode and other general information
about the vehicle. For more information, please
refer to the user instructions for the vehicle or the
audio and telematics system.
Integrating a smartphone allows you to use
its applications, such as a navigation app or
music player. No other integration between
the smartphone and the vehicle is possible, in
particular active access to vehicle data. How the
data is processed subsequently is determined
by the supplier of the application being used.
The ability the change settings depends on the
application in question and on the operating
system installed on your smartphone.

Online services

If your vehicle is connected to a wireless
network, data can be exchanged between
your vehicle and other systems. Connection
to a wireless network is made possible via a

transmitter located in your vehicle or a mobile
device that you have provided (e.g. smartphone).
The online services can be used via this wireless
connection. These include online services and
applications (apps) provided to you by the
Manufacturer or other suppliers.

Exclusive services

As regards the Manufacturer's online services,
the corresponding functions are described by
the Manufacturer in an appropriate medium
(e.g. handbook, Manufacturer's website) and the
information about data protection is provided.
Personal data may be used for online services.
The exchange of data for this purpose takes
place over a secure connection, using for
example the Manufacturer's dedicated computer
systems. The collection, processing and use of
personal data for the development of services
are carried out solely on the basis of a legal
authorisation, for example in the case of a
legal emergency call system or a contractual
agreement or else under a consent agreement.
You can activate or deactivate the services and
functions (some may be chargeable) and, in
some cases, the vehicle's entire connection to
the wireless network. This does not include the
statutory functions and services such as the
emergency or assistance call system.

Third-party services

If you use online services provided by other
(third-party) suppliers, these services are subject

14/02/2022 15:34:25

298

Event data recorders

to the responsibility, the data protection and
the terms and conditions of use of the supplier
in question. The Manufacturer often has no

influence over the content exchanged in this

regard.
Please therefore ensure that you are aware of
the nature, extent and purpose of the collection
and use of personal data as part of the third-
party services provided by the service provider
in question.

14/02/2022 15:34:25