Fiat Grande Punto Actual (2017 year). Manual — part 10
149
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
CHANGING AN
EXTERIOR BULB
For the type of bulb and relative power
rating, see “Changing a bulb”.
FRONT LIGHT CLUSTERS fig. 16
The front light clusters contain sidelights,
dipped beam, main beam and direction in-
dicator bulbs.
The bulbs are arranged inside the light
cluster as follows:
A sidelights
B dipped beams/main beams (double light)
C direction indicators
SIDELIGHTS fig. 17
To change the bulb, proceed as follows:
❒ remove the snap-fitted rubber cap A,
as shown by the arrow;
❒ press in tabs B and remove the bulb
holder;
❒ remove the bulb C and replace it;
❒ refit the bulb holder and refit the cap
A, ensuring that it locks into place.
fig. 16
F0M0178m
fig. 17
F0M0179m
-------------------------------------------------------------------------------------------------------------------------------------------------------------
150
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
DIPPED BEAM / MAIN BEAM
HEADLIGHTS fig. 18
To change the bulb, proceed as follows:
❒ remove the snap-fitted rubber cap A,
as shown by the arrow;
❒ disconnect the central electric connec-
tor and release the bulb holder catch;
❒ remove the bulb B and replace it;
❒ fit the new bulb, aligning the outlines of
the metallic part with the grooves on
the reflector;
❒ refit the bulb holder catch and recon-
nect the electrical connector;
❒ refit the cap A, ensuring that it locks in-
to place.
DIRECTION INDICATORS
Front fig. 19/a – 19/b
To change the bulb, proceed as follows:
❒ steer the right/left wheel outwards;
❒ turn the catch A-fig. 19/a as shown by
the arrow, then lift the access flap B;
❒ remove the bulb holder cover C-fig.
19/b by turning it anti-clockwise;
❒ remove the bulb D by pushing it in gen-
tly and turning anti-clockwise (“bayo-
net” clamping), then replace it;
❒ refit the bulb holder cover C by turning
it clockwise and locking it properly;
❒ close the flap B-fig. 19/a and then turn
the catch A.
fig. 18
F0M0180m
fig. 19/b
F0M0181m
fig. 19/a
F0M0261m
-------------------------------------------------------------------------------------------------------------------------------------------------------------
151
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
Sidelights fig. 20
To change the bulb, proceed as follows:
❒ slide the lens A to press in the inter-
nal catch B, then pull the unit outwards;
❒ turn the bulb holder C anti-clockwise,
remove the snap-fitted bulb D and re-
place it;
❒ refit the bulb holder C into the lens by
turning it clockwise;
❒ refit the unit making sure the internal
catch B clicks into place.
FRONT FOG LIGHTS
(for versions/markets, where provided)
Contact a Fiat Dealership to have bulbs
for the front fog lights A-fig. 21 replaced.
REAR LIGHT CLUSTERS
fig. 22-23
The rear light clusters contain taillight,
brake light and direction indicator bulbs.
The bulbs are arranged inside the light
cluster as follows:
B direction indicators
C taillights
D taillights/brake light (double light).
fig. 20
F0M0182m
fig. 22
F0M0184m
fig. 21
F0M0223m
-------------------------------------------------------------------------------------------------------------------------------------------------------------
152
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
To change the bulb proceed as follows:
❒ open the boot then loosen the two fas-
tening screws A;
❒ disconnect the central electric connec-
tor and pull the lens unit outwards;
❒ loosen the screws E and remove the
bulb holder;
❒ remove the bulb that needs replacing
B, C or D by pushing it in slightly and
turning it anti-clockwise (“bayonet”
clamping), then replace it;
❒ refit the bulb holder and tighten the
screws E;
❒ reconnect the electric connector, cor-
rectly realign the unit with the car body
and then tighten the fastening screws A.
REAR FOG LIGHTS fig. 24
Contact a Fiat Dealership to have bulbs
for the rear fog lights A replaced.
REVERSE LIGHTS fig. 25
Contact a Fiat Dealership to have bulbs
for the reverse lights A replaced.
fig. 24
F0M0208m
fig. 25
F0M0209m
fig. 23
F0M0185m
-------------------------------------------------------------------------------------------------------------------------------------------------------------
153
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
THIRD BRAKE LIGHT fig. 26-27
To change the bulb proceed as follows:
❒ open the boot;
❒ remove the rubber caps A-fig. 26;
❒ press the catches B-fig. 26 and remove
the lens unit C-fig. 27;
❒ disconnect the electric connector;
❒ press in the tabs D-fig. 27 and remove
the bulb holder;
❒ remove the snap-fitted bulb and replace
it.
NUMBER PLATE LIGHTS
fig. 28-29
To change the bulb proceed as follows:
❒ manipulate the point shown by the ar-
row and remove the lens unit A-fig. 28;
❒ change the bulb fig. 29 by releasing
it from the side contacts and making
sure the new bulb is correctly fastened
between these contacts;
❒ reattach the snap-fitted lens unit.
fig. 26
F0M0210m
fig. 27
F0M0211m
fig. 28
F0M0212m
fig. 29
F0M0233m
-------------------------------------------------------------------------------------------------------------------------------------------------------------
154
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
CHANGING
AN INTERIOR BULB
For the type of bulb and relevant power
rating, see “Changing a bulb”.
FRONT CEILING LIGHT
(for versions/markets, where provided)
Proceed as follows to replace the bulbs:
❒ manipulate the points shown by the ar-
rows and remove the light D-fig. 30;
❒ open the protective flap E-fig. 31;
❒ replace bulb F-fig. 33 by releasing it
from the side contacts and making sure
that the new bulb is correctly clamped
between these contacts;
❒ close the protective flap E-fig. 31 and
secure light D-fig. 30 into its housing
making sure that it locks into place.
FRONT CEILING LIGHT
WITH SPOT LIGHTS
(for versions/markets, where available)
Proceed as follows to replace the bulbs:
❒ manipulate the points shown by the
arrows and remove light A-fig. 32;
❒ open the protective flap B;
❒ replace bulbs C-fig. 33 by releasing
them from the side contacts and mak-
ing sure that new bulbs are correctly
clamped between these contacts;
❒ close the lid B-fig. 33 and secure light
A-fig. 32 into its housing making sure
that it locks into place.
fig. 32
F0M0213m
fig. 33
F0M0234m
fig. 30
F0M0214m
fig. 31
F0M0235m
-------------------------------------------------------------------------------------------------------------------------------------------------------------
155
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
CHANGING A FUSE
GENERAL INFORMATION
The fuse is a protective device for the
electric system: it comes into action if
there is a fault or improper action on the
system.
Check the state of the corresponding fuse
when a device does not work: the filament
A-fig. 34 must be intact. If it is not, re-
place the blown fuse with a new one of the
same amperage (same colour).
B undamaged fuse fig. 34
C fuse with damaged filament fig. 34.
fig. 34
F0M0236m
Do not replace one fuse with
another of greater amper-
age; FIRE HAZARD.
WARNING
Never replace a damaged fuse
with metal wires or other
recycled material.
If a general protection fuse
(MEGA-FUSE, MIDI-FUSE,
MAXI-FUSE) is activated, contact
a Fiat Dealership.
WARNING
If the same fuse blows again,
contact a Fiat Dealership.
WARNING
Remove the key from the ig-
nition and switch off or dis-
connect all devices before replacing
a fuse.
WARNING
If a general protection fuse
for safety systems (air bag
system, braking system), power unit
systems (engine system, transmission
system) or steering system is triggered,
contact a Fiat Dealership.
WARNING
-------------------------------------------------------------------------------------------------------------------------------------------------------------
156
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
ACCESSING THE FUSES
The fuses are grouped in three control
units: on the dashboard, in the engine
compartment and in the left-hand side of
the boot.
Dashboard fusebox fig. 36
To access the dashboard fusebox, loosen
the screws A-fig. 35 and remove the
cover.
fig. 36
F0M0415m
3
4
5
6
7
8
9
10
11
12
13
14
1
2
fig. 35
F0M0016m
-------------------------------------------------------------------------------------------------------------------------------------------------------------
157
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
Engine compartment fusebox
fig. 38
To access the fusebox located next to
the battery, remove the protective cover
fig. 37.
fig. 38
F0M0417m
fig. 37
F0M0416m
-------------------------------------------------------------------------------------------------------------------------------------------------------------
158
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
Boot fusebox fig. 40
To access the fusebox located in the left
side of the boot, open the appropriate flap
(as shown in fig. 39).
fig. 40
F0M0372m
fig. 39
F0M0246m
-------------------------------------------------------------------------------------------------------------------------------------------------------------
159
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
1
8
13
2
5
11
4
6
14
7
12
3
10
7,5
7,5
5
5
10
5
20
20
20
20
5
5
7,5
FUSE TABLE
Dashboard fusebox fig. 36
DEVICES
FUSE
AMPS
Right dipped beam headlight
Left dipped beam headlight, corrector, headlamp alignment corrector
INT/A supply for switch coils on engine fusebox
and switch coils on body computer control unit
Front ceiling light, rear ceiling light (VAN version)
Supply and battery for EOBD diagnostic plug, alarm, sound system,
Blue&Me control unit
INT supply for instrument panel, switch on brake pedal
(N.O. contact), third brake light
Door locking/unlocking motors, dead lock activation motors,
boot unlocking motor
Windscreen/rear window washer pump
Electric window motor on driver-side front door
Electric window motor on passenger-side front door
INT supply for dashboard control lights, mirror movement exterior electrics,
sunroof control unit, My Port infotelematic system socket
Instrument panel
INT supply for brake pedal switch (NC contact), clutch pedal switch,
interior heating unit, Blue&Me control unit, sound system capabilities,
voltage stabiliser control unit, reverse light on rear bumper,
water sensor on diesel filter, glow plug heating control unit, airflow meter,
brake booster sensor, switch coils on engine compartment fusebox
-------------------------------------------------------------------------------------------------------------------------------------------------------------
160
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
Engine compartment fusebox fig. 38
DEVICES
FUSE
AMPS
Single tone horn
Left main beam headlight, right main beam headlight
Additional heater
Air conditioning compressor
Heated rear window
Fuel pump on tank
10
14
15
19
20
21
10
15
30
7,5
30
15
-------------------------------------------------------------------------------------------------------------------------------------------------------------
161
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
15
7,5
–
15
5
7,5
30
84
85
86
87
88
DEVICES
FUSE
AMPS
Left fog light, right fog light
Methane system management solenoid valves
Socket (ready for use)
Passenger compartment socket, cigarette lighter
Battery charge status sensor
De-mister on driver-side wing mirror, de-mister on passenger-side wing mirror
-------------------------------------------------------------------------------------------------------------------------------------------------------------
162
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
17
14
01
03
04
15
10
16
08
07
05
11
13
09
06
02
20
7,5
–
–
–
–
20
–
10
–
15
20
–
10
–
–
Boot fusebox fig. 44
DEVICES
FUSE
AMPS
Sunroof opening system
Alarm system management control unit
Spare
Spare
Spare
Spare
Electric windows system (motor, control unit) on right-hand door
Spare
Driver’s seat heater control unit
Tow hook system (capability for after-sale fuse assembly)
Boot socket
Electric windows system (motor, control unit) on left-hand door
Spare
Front passenger seat heater control unit
Spare
Spare
-------------------------------------------------------------------------------------------------------------------------------------------------------------
163
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
RECHARGING
THE BATTERY
IMPORTANT The battery recharging pro-
cedure is provided for information pur-
poses only. You are recommended to go
to a Fiat Dealership to have this operation
performed.
We recommend recharging the battery
slowly for approximately 24 hours at low
amperage. Rapid charging with high cur-
rents could damage the battery.
VERSIONS WITHOUT
Start&Stop SYSTEM
Charge the battery as follows:
❒ disconnect battery negative terminal;
❒ connect the charger cables to the bat-
tery terminals, observing the polarity;
❒ turn on the charger;
❒ when you have finished, turn the charg-
er off before disconnecting it from the
battery;
❒ reconnect battery negative terminal.
fig. 41
F0M0518m
VERSIONS WITH Start&Stop
SYSTEM (with dummy pole)
fig. 41
(for versions/markets, where provided)
To charge, proceed as follows:
❒ disconnect the quick-release negative
terminal A from the negative dummy
pole B because the battery negative
pole C has a sensor D monitoring the
battery conditions, that should never
be disconnected from the negative pole
C (unless the battery is replaced);
❒ connect the battery charger positive ca-
ble to the battery positive pole E and
the negative cable to the dummy pole
B;
❒ switch on the battery charger. At the
end of the charging process, switch the
charger off before disconnecting it;
❒ after disconnecting the battery charg-
er, reconnect the quick-release nega-
tive terminal A to the dummy pole B.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
164
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
RAISING THE CAR
If the car needs to be lifted, go to a Fiat
Dealership which is equipped with the arm
hoist or workshop lift.
The car should be lifted side-on only, by
putting the ends of the arms or the work-
shop lifting device in the areas shown in
the diagram.
Do not try to recharge a frozen
battery; defrost it first to pre-
vent the risk of explosion. If the bat-
tery was frozen, have it inspected by
specialised personnel before recharg-
ing to check that the internal ele-
ments are not damaged and that the
casing is not cracked, which could
cause poisonous, corrosive gas to leak.
WARNING
fig. 42
F0M0513m
Battery fluid is poisonous
and corrosive: avoid contact
with your skin and eyes. The battery
must be recharged in a ventilated
place away from naked flames or
possible sources of sparks to avoid the
risk of explosion and fire.
WARNING
VERSIONS WITH Start&Stop
SYSTEM fig. 42
(without dummy pole)
(for versions/markets, where provided)
To charge, proceed as follows:
❒ disconnect the connector A (pressing
the button B) from the sensor C mon-
itoring the battery conditions, on the
negative pole D of the battery;
❒ connect the battery charger positive ca-
ble E and the negative cable to the ter-
minal of sensor D, according to figure;
❒ turn on the battery charger. At the end
of the charging process, switch the bat-
tery charger off;
❒ after disconnecting the battery charg-
er, reconnect the connector A to the
sensor C according to figure.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст