Fiat Panda (2022 year). Manual in english — page 14

MULTIMEDIA

220

If the name is recognised, the system

will display the information for the

contact on the display.

The system will ask you to confirm

your request. To make the call, say

"Yes"; otherwise, say "No".
Alternatively, it is possible to call a

number that is not in the phonebook by

saying the number one figure at a time.

Managing an incoming call

When a call is received, the system will

display the caller's ID, where available.
The incoming call will be signalled by

your mobile phone's personalised

ringtones (the availability of this function

depends on the specific features of

your phone).
Answering a call:

To answer the call, press

.

To end the call, press

for more

than 1 second.

To reject a call: press

.

To ignore a call and not hear

the ring tone, press

/

(for

versions/markets, where provided).

Putting a phone call on HOLD

To place a call in progress on HOLD

and disable the microphone in order

to be able to talk without being heard

by the person you are talking to press

/

(for versions/markets, where

provided).

VOICE CONTROLS

Global commands

SELECT MEDIA SOURCE;

SELECT RADIO SOURCE;

SELECT PHONE SOURCE;

CALL or DIAL;

READ MESSAGE;

SETTINGS;

HELP;

CANCEL;

REPEAT.

Phone commands

DIAL;

CALL (followed by name);

CALL (followed by number);

CALL BACK;

READ LAST.

Audio Bluetooth®/USB Commands

(for versions/markets, where provided)

PLAY;

PAUSE;

STOP.

Radio

SELECT BAND “FM” or “AM”.

NOTE We recommend not directing

the central air vents towards the

microphone as the noise of the air on

the microphone (fig. 195) could worsen

voice command performance.

221

UCONNECT MOBILE

QUICK REFERENCE GUIDE

193

F1D1006

MULTIMEDIA

222

General functions

Button

Functions

Mode

Ignition

short button press

Switching off

long button press

Volume adjustment

turn knob

RADIO

Select radio souce FM, AM, DAB (for versions/markets,

where provided)

short cyclical button press

ABC

–

1 2 3 4 5 6

Select preset ranges

short cyclical button press

MEDIA

Select

Bluetooth®

Audio, USB

short cyclical button press

(Play/Pause)

Activate Play/Pause for the Media source

Activate Mute for the Radio source

Short button press

Audio adjustments: low tones (BASS), high tones

(TREBLE), RH/LH balance (BALANCE), front/rear

balance (FADER) (where provided)

Menu activation: short button press.
Adjustment type selection: press buttons

or

.

Value adjustment: press

or

buttons.

MENU

Advanced functions adjustment

Menu activation: short button press.
Adjustment type selection: press buttons

or

.

Value adjustment: press

or

buttons.

223

Radio functions

Button

Functions

Mode

Radio station search:

Automatic search

Manual search

Automatic search: press buttons

or

(hold the

button down for fast forward).
Manual search: press buttons

or

(hold the button

down for fast forward).

1 2 3 4 5 6

Store current radio station

Long button press for memory preset from 1 to 6

Stored station recall

Brief button press for memory preset from 1 to 6

MULTIMEDIA

224

CONTROLS ON THE STEERING WHEEL

194

F1D1032

225

Button

Functions

Mode

/

Enable/disable Audio Mute

Return to the previous menu mode function

Short button press

+

Increasing volume

Button press

–

Decreasing volume

Button press

SRC

Select sources FM, AM, DAB (for versions/markets, where

provided),

Bluetooth®

Audio and USB

Button press

Radio: automatic search for the next tunable broadcaster -

USB source: selecting the next track

Button press

Radio: automatic search for the previous tunable

broadcaster - USB source: selecting the previous track

Button press

MULTIMEDIA

226

Multimedia support function

Button

Functions

Accept an incoming phone call

End the phone call in progress

Reject an incoming phone call

/

Deactivate a voice recognition

Activate/deactivate Audio Mute

Interrupt the reading of an SMS message

Exit from the Main Menu of

Bluetooth

®

Exit from a submenu and return to previous menu option

Exit from the current menu option without saving

Deactivate/reactivate the microphone during a phone conversation

Mute the volume of the call tone for incoming phone calls

Activation of voice recognition

Interruption of the voice message in order to give a new voice command

+/-

Adjust the audio volume of all functions: hands-free, text message reader, multimedia supports, voice

messages, Radio, USB, depending on the active source

Scroll through Menu items on the panel

Select multimedia support tracks

Scroll through SMS messages in the list

Access to the radio menu displayed on the instrument panel

SRC/OK

Confirm manually selected menu option

Select sources: FM, AM, DAB (where provided),

Bluetooth

® AUDIO and USB

Select the SMS message on the instrument panel

The functions of the steering wheel controls are activated when the button is released.

227

GENERAL INFORMATION

The Uconnect Mobile system has the

following functions:

Radio section

PLL tuning with FM/AM/MW

frequency bands (where present);

RDS (Radio Data System) with TA

(traffic alerts) function - TP (traffic

programmes) - EON (Enhanced Other

Network) - REG (regional programmes);

AF: search selection for alternative

frequencies in RDS mode;

automatic/manual tuning into

stations;

FM Multipath detector;

manual storing of 36 or 54 stations:

18 in the FM band (6 in FM-A, 6 in FM-

B and 6 in FM-C) and 18 in AM (6 in

AM-A, 6 in AM-B and 6 in AM-C) and

18 in DAB (where present);

SPEED VOLUME function:

automatic volume adjustment in

function of the speed of the vehicle;

automatic Stereo/Mono selection.

Audio section

Mute function;

Soft-Mute function;

Loudness function

7-band graphic equaliser;

Separate bass/treble adjustment

Right/left channel balance.

Bluetooth®

For the

Bluetooth

® function, see the

description in the dedicated paragraph.

USB section

For the USB function, see the

description in the dedicated paragraph.

FUNCTIONS AND

ADJUSTMENTS

Ignition

Press the

(ON/OFF) button briefly to

switch the Uconnect Mobile system.
If the Uconnect Mobile system comes

on when the key is removed from

the ignition device, it will switch off

automatically after about 20 minutes

(if this time has been set). After the

Uconnect Mobile system has switched

off automatically it can be switched on

for a further 20 minutes by pressing the

button (ON/OFF).

Switching off

Long press on button

(ON/OFF).

Volume adjustment

To adjust the volume, turn the twist

control .
If the volume level is changed during

the transmission of traffic news, the

new setting will only be maintained until

the news is finished.

Mute function

Press the

/

button on the

steering wheel to activate the Mute

function. In the Radio source, the word

“MUTE” will appear, associated with
the active source. Press the

/

button on the steering wheel again to

deactivate the Mute function.

Audio settings

The functions that can be

selected from the audio menu

change depending on the

context: AM/FM and DAB (where

provided)/USB/

Bluetooth

®.

Press the AUDIO button briefly to

change the Audio functions. After the

AUDIO button is first pressed, the

display will show the bass level value

for the source activated at that time

(e.g. in FM mode the display will show

the wording "FM Bass +2"). Use the

or

buttons to scroll through the

menu functions. To change the setting
of the function selected use the

or

buttons.

The current status of the selected

function appears on the display.
The functions managed by the Menu

are:

BASS: adjustment of bass tones;

TREBLE: adjustment of high tones;

BALANCE: right/left balance

adjustment;

FADER: front/back balance

adjustment (where provided);

LOUDNESS: activation/ deactivation

of the increase of bass and high tones;

MULTIMEDIA

228

EQUALISER: activation and selection

of factory-set equaliser levels;

MY EQ: customised equaliser

setting.

MENU

MENU button functions

Press the button MENU briefly to

activate the Menu function. Use the

or

buttons to scroll through the

menu functions. To change the setting
of the function selected use the

or

buttons.

The functions managed by the Menu

are:

AF SWITCHING: automatic

activation/ deactivation of the selection

of the station with the strongest signal

that transmits the same programme.
NOTE FM following in DAB (where

provided; the radio switches

automatically to FM in case of low

DAB signal and back to DAB as soon

as the signal is available) is enabled by

enabling AF.

TRAFFIC INFORMATION:

activation/deactivation of traffic

information.
NOTE Traffic information is enabled

only if tuned to the station broadcasting

the announcement.

DAB INFO CATEGORIES (only

enabled for DAB sources): single

category enable/disable (Financial,

News flash, Program info, Spec event,

Sport report, Warning, Weather).

REGIONAL MODE: activation/

deactivation of regional programmes.

MP3 DISPLAY: MP3 display setting.

SPEED VOLUME: speed-dependent

automatic volume control.

RADIO ON VOLUME: maximum

radio volume limit activation/

deactivation.

RADIO OFF: off mode selection.

SYSTEM RESET: reset of factory

settings.
Press the button MENU again to exit

the Menu function.
NOTE AF SWITCHING, TRAFFIC

INFORMATION and REGIONAL MODE

adjustments are only possible on FM.

RADIO (Tuner)

To select the Radio function while

listening to another audio source,

briefly press the RADIO button several

times to select the desired band, FM

AM or DAB (where present).
Once the Radio mode has been

activated, the display will show the

name (only RDS stations) and the

frequency of the selected radio station,

the frequency band selected (e.g. FMA)

and the preselect button number (e.g.

P1).

Each time the button is pressed,

the FM, AM and DAB bands (where

present) are selected cyclically.

Preset buttons

The buttons numbered from 1 to 6

are used to set the following preset

stations:

18 in the FM band (6 in FM-A, 6 in

FM-B and 6 in FM-C);

18 in the AM band (6 in AM-A, 6 in

AM-B and 6 in AM-C).
To listen to a preset station, select the

desired frequency band with the RADIO

button, briefly press ABC button to

select the preset band (A, B or C), and

then briefly press the corresponding

preset button (from 1 to 6).
By pressing the preset button for more

than 2 seconds, the tuned station

will be stored. The storing phase is

confirmed by an acoustic signal.

Automatic tuning

Briefly press the

or

button to

start the automatic tuning search for

the next station that can be received in

the selected direction.

Manual tuning

Select the desired frequency band and
then press the

or

button briefly

and repeatedly to start to the search in
the desired direction. If the

or

buttons are pressed longer, the fast

229

search will start and then stop when

the button is released.
NOTE The DAB frequency can be used

in countries where digital transmission

technology is available. The device will

not be tuned to any frequency if the

DAB button is pressed in a country

where the service is not provided.

USB MODE

To activate USB mode, insert the

corresponding device (USB stick or

other device) into the USB port on the

car dashboard. If a USB device is

inserted with the system on, it will start

playing the tracks found on the device.
NOTE The Uconnect Mobile system

may not support some USB keys

Mobile: in this case, it will not

automatically switch from “Radio”

operation to “Media” operation. If the

device used does not play, verify its

compatibility by selecting the Media

Function: a dedicated message will

appear on the Uconnect Mobile system

display.

WARNING After using a USB charging

port, we recommend disconnecting the

device (smartphone), always removing

the cable from the vehicle socket first,

never from the device. Cables left

flying or connected incorrectly could

compromise correct recharging and/or

the USB socket condition.

NOTE The USB ports handle

data transmission from the Pen

Drive/Smartphone, etc. and slow

recharging of an external device, which

is not guaranteed as it depends on the

device type/brand.

BLUETOOTH®

Bluetooth®

technology allows you

to use your mobile phone through the

car's hands-free system, without the

need for wires. A mobile phone with

Bluetooth®

is required to use the

hands-free system. To consult the list

of compatible phones, see the site:

www.mopar.eu/owner.
The hands-free function allows the

following operations to be performed:

Calling a telephone number by voice

command: you can dial a telephone

number by stating the numbers out

loud.

Calling someone in the phonebook

using voice commands: you can call

someone in your mobile phonebook

using your voice. You can also call

someone in your phonebook by

selecting from the contacts that appear

on the display of the instrument panel.

(This function requires your phone

directory to have been copied onto the

vehicle hands-free system).

Accepting a call: you can accept an

incoming call by pressing the button

on the steering wheel.

Rejecting a call: you can reject a call

with a long press of the button

on

the steering wheel.

Text Message Reader

(available only with mobile phones that

support this function)
The SMS message reader makes it

possible to:

Be informed, by means of a message

on the instrument panel display, of the

reception a new SMS message on

your mobile phone with

Bluetooth

®

technology; the number/name of the

sender is displayed and the system will

also ask whether to read the message

to you.

Manage the list of messages

received on your mobile phone only

during connection with the active

system.

Quick guide to the SMS message

reader

(only for mobile phones that support

this function)
If your

Bluetooth

® phone supports

this function, when you receive a new

SMS message, the system alerts you

MULTIMEDIA

230

with an acoustic signal and asks you if

you want to read it.

Say “Yes” or press the button

or

SRC/OK

. The system will read the last

message received;

Say “NO” or press the

/

button. The system will store the

message which you can read later, as

long as the phone is connected to

the system. To get to know all the

functions and ways of using the text

message reader, refer to the "Text

message reader functions" paragraph

in this section.

MULTIMEDIA FUNCTIONS

The

MEDIA

menu allows you to

view and play the tracks stored on a

USB/Audio

Bluetooth

® source.

It is recommended to load only

unprotected music files, with supported

extensions. If the USB device contains

other formats (e.g. .exe, .cab, .inf, etc.),

problems might arise during playing of

tracks.

WARNING Do not play test

audio/musical files since they could

damage the components installed in

the car.

To connect your UBS device to the

system, proceed as follows:

Connect the device to the USB port

on the dashboard;

Turn the ignition key to MAR. The

system will automatically start playing

your digital tracks, selecting them from

a library that is created the moment the

USB device is connected.
When the creation of the multimedia

library is over, it is possible to use the

system to display and select the tracks

present and to activate playing.

Managing the multimedia library

With the MEDIA function you can select

the digital audio on your USB device,

using voice recognition or the steering

wheel controls.
Tracks may be selected by folder,

artist, musical genre, album and

playlist.
Activate the Main Menu from the

steering wheel controls on the

instrument panel display, select the

BROWSE USB option and then press

SRC/OK

.

Select one of the following items:

FOLDERS

ARTISTS

GENRES

ALBUMS

PLAYLISTS

and press

SRC/OK

.

select “PLAY ALL” and confirm with

SRC/OK

;

select the item chosen and confirm

with

SRC/OK

;

It is also possible to access the same

functions with the voice commands:

press the button on the steering

wheel

and say "BROWSE USB";

say one of the available options:

"FOLDERS", "ARTISTS", "GENRES",

"ALBUMS", "PLAYLISTS";

select “PLAY ALL” and confirm with

SRC/OK

;

select the item chosen and confirm

with

SRC/OK

.

Pause

To pause the track you are listening

to: press the button

on the front

panel of the Uconnect Mobile system.

To resume listening to a track that you

have paused: press the

button on

the front panel of the Uconnect Mobile

system.

Stop

To stop playing a track: say "Stop”. To

resume, say “Play”.
NOTE the “Play” command is only

available if you paused playback using

the “Stop” command.

Next track

To skip to the next track using manual

interaction: while listening to a digital
track, press

(steering wheel

controls) or

(Uconnect Mobile

231

system controls) (for versions/markets,

where provided).

Previous track

To return to the previous track using

manual interaction: while listening to a
digital track, press

(steering wheel

controls) or

(Uconnect Mobile

system controls) (for versions/markets,

where provided).

Change audio source

To change the active audio source
(Radio, USB, Tuner,

Bluetooth®

Audio) press the

SRC/OK

or

MEDIA

button on the front panel of the

Uconnect Mobile system, or, using

voice interaction: say "Select source

USB, Radio,

Bluetooth®

Audio".

NOTE While playing

Bluetooth

®

audio, there could be some incorrect

displays related to the phone. This is

not due to the radio, but depends on

the information sent by the phone.

BLUETOOTH® DEVICE

WARNINGS

Access to the phonebook copied

onto the system is possible only when

the mobile phone from which it has

been copied is connected.

The names stored on the SIM card or

in your mobile phone memory can be

transferred to the system in different

ways, depending on the model of

mobile phone.

Getting to know the voice

commands

When talking to the system, you can

always use the voice command "Help"

to obtain detailed instructions on the

voice commands available for each

interactive stage.

Pairing a Bluetooth® device

NOTE Only do this when the car is

stationary.
To pair your mobile phone with the

system, proceed as follows.
Manual procedure:

Activate the Main Menu by pressing

the

MENU

button;

select the SETTINGS option, then the

"Pairing" option.

Voice procedure:

Press

and say “Settings”. Then,

at the end of the message, say

"Pairing".

The system will show a PIN number

on the display to be used for pairing.

Using the search function of the

Bluetooth

® devices of your phone,

search for the “Radio BT” device.

When prompted, enter the PIN code

displayed on the instrument panel

using your mobile phone keypad. If the

registration is successful, the system

will say "Connecting" and at the end

the display will show, as confirmation,

details of the mobile phone registered.
Once the device has been paired, if the

function is supported by the phone, the

system automatically asks to download

the phonebook onto the Uconnect

Mobile system.
NOTE After updating the phone

software, for proper operation, it is

recommended to remove the phone

from the list of devices linked to the

radio, delete the previous system

pairing also from the list of

Bluetooth

®

devices on the phone and make a new

pairing.

Making a phone call

Press the steering wheel control

and say “Call” and the name of the

contact in the phonebook.

If the name is recognised, the system

will display the information for the

contact on the display.

The system will ask you to confirm

your request. To make the call, say

"Yes"; otherwise, say "No".
Alternatively, it is possible to call a

number that is not in the phonebook by

saying the number one figure at a time.

Managing an incoming call

When a call is received, the system will

display the caller's ID, where available.
The incoming call will be signalled by

your mobile phone's personalised

MULTIMEDIA

232

ringtones (the availability of this function

depends on the specific features of

your phone).
Answering a call:

To answer the call, press

.

To end the call, press

for more

than 1 second.

To reject a call: press

.

To ignore a call and not hear the ring

tone, press

/

.

Putting a phone call on HOLD

To place a call in progress on HOLD

and disable the microphone in order to

be able to talk without being heard by
the person you are talking to press

/

.

VOICE COMMANDS

Global commands

SELECT MEDIA SOURCE;

SELECT RADIO SOURCE;

SELECT PHONE SOURCE;

CALL or DIAL;

READ MESSAGE;

SETTINGS;

HELP;

CANCEL;

REPEAT.

Phone commands

DIAL;

CALL (followed by name);

CALL (followed by number);

CALL BACK;

READ LAST.

Audio Bluetooth®/USB Commands

PLAY;

PAUSE;

STOP.

Radio

SELECT BAND “FM” “AM” or “DAB”.

NOTE We recommend not directing

the central air vents towards the

microphone as the noise of the air on

the microphone (fig. 195) could worsen

voice command performance.

195

F1D0999

PANDA UCONNECT APP

To use the Panda Uconnect app you

must download it from the Apple

App Store or from Google Play and

pair the smartphone to the radio via

Bluetooth

®, as described in the

"Bluetooth

® Device” paragraph in this

chapter. For the list of compatible

phones, see Fiat eLum site.
The app interface may change

depending on how it is used:

connected or not connected to the car

radio.
When it is connected via

Bluetooth

®,

you can interact with the radio through

the screen of your smartphone. You

can listen to you favourite music by

selecting the source, the track or the

radio station desired. You can also view

the phonebook, your car handbook

and, if necessary, call for assistance.

When it is not connected

, you can

have all the information about the state

of your car with my:Car and indications

about your driving style with eco:Drive.

You can also find your car easily if you

do not remember where you parked it.

233

RADIO 7" TOUCHSCREEN

CONTROLS ON FRONT PANEL

196

F1D1000

MULTIMEDIA

234

CONTROLS ON THE DASHBOARD

Button

Functions

Mode

/

VOLUME

On/off

Brief button press

Volume adjustment

Left/right rotation of knob

Volume activation/deactivation (Mute/Pause)

Brief button press

TUNE SCROLL /

BROWSE ENTER

Confirmation of the option displayed

Open browsing list (Radio or Media mode)

Brief button press

Scrolling the list or tuning to a radio station

Display list of stations (Radio mode)

Scroll contents of sources (Media mode)

Media source track change

Station change (RADIO mode)

Left/right rotation of knob

235

GRAPHIC BUTTONS ON DISPLAY

Graphic button

Functions

Mode

Radio

Access to the Radio mode

Press graphic button

Media

Source selection: USB,

Bluetooth®

Press graphic button

Phone

Access to the Phone mode

Press graphic button

Apps

Access to the additional functions (display of Time,

Compass, Media Player and App/Services installed

in the vehicle)

Press graphic button

Compass

Viewing compass information

Press graphic button

Settings

Access the settings menu

Press graphic button

Audio

Access the Audio settings menu

Press graphic button