Fiat 500 Hybrid (2020 year). Manual in english — page 3
KNOWING THE INSTRUMENT PANEL
40
SETUP MENU
52
F0S0383
The menu comprises a series of
options which can be selected using
buttons
+
and
–
fig. 52 to access
the different selection and setting
operations (Setup) indicated below.
The menu can be activated by briefly
pressing the MENU button
.
Single presses on buttons + or
–
will scroll through the setup menu
options. Operating modes are different
according to the characteristics of the
option selected. Some options have a
submenu.
Indicatively the menu contains the
following items, but they may vary
according to the instrument panel
installed:
MENU
DIMMER
SPEED BEEP
ACTIVATION
SET TIME
SET DATE
AUTOCLOSE
UNITS
LANGUAGE
BUZZER VOLUME
BUTTON VOLUME
SEAT BELT BUZZER
SERVICE
AIRBAG / PASSENGER AIRBAG
DAYTIME RUNNING LIGHTS
RESET TYRES
SEE RADIO (for markets/versions,
where provided)
SEE PHONE (for versions/markets,
where provided)
SEE NAVIGATION (for
versions/markets, where provided)
EXIT MENU
Set Time (Setting the clock)
Using this function, it is possible to
set the clock through two submenus:
"Time" and "Format".
To adjust, proceed as follows:
briefly press the MENU
button:
the display will show the two submenus
“Time” and “Format”;
press the
+
or
–
button to move
between the two submenus;
once you have selected a submenu,
press the MENU
button briefly;
when you select the “Time”
submenu, pressing the MENU
button briefly the display shows the
"hours";
press the
+
or
–
button to adjust;
briefly pressing the MENU
button
the “minutes” are displayed;
press the
+
or
–
button to adjust.
NOTE The setting will increase or
decrease by one unit each time the
+
or
–
button is pressed. Hold down the
button to increase/decrease the setting
rapidly and automatically. Complete the
adjustment with single presses of the
button when you approach the desired
value.
When you select the “Format”
submenu, pressing the MENU
button briefly the mode is displayed;
press
+
or
–
to select “24h” or “12h”.
When you have made the adjustment,
press the MENU button
briefly to
return to the submenu screen or hold
the button down to return to the main
menu screen without storing.
hold the MENU button
or SAVE
for colour displays down again to return
to the standard screen or to the main
menu according to where you are in
the menu.
Set date (Setting the date)
This function may be used to update
the date (year/month/day).
-------------------------------------------------------------------------------------------------------------------------------------------------------------
41
To adjust, proceed as follows:
briefly press the MENU
button:
“year” will be displayed;
press the
+
or
–
button to adjust;
briefly press the MENU
button:
"month" is displayed;
press the
+
or
–
button to adjust;
briefly press the MENU
button:
“day” is displayed;
press the
+
or
–
button to adjust;
NOTE The setting will increase or
decrease by one unit each time the
+
or
–
button is pressed. Hold down the
button to increase/decrease the setting
rapidly and automatically. Complete the
adjustment with single presses of the
button when you approach the desired
value.
Service (scheduled servicing)
This function allows you to display
the information about km/mileage
intervals or, for versions/markets,
where provided, time intervals for
car maintenance. To consult the
information, proceed as follows:
press the MENU
button: the
display shows when servicing is due
in km/mi or days (where provided)
according to the previous setting (see
paragraph "Units of measurement");
press the MENU
button to return
to the menu screen; press the button
again to return to the standard screen.
WARNING The “Scheduled Servicing
Plan” includes vehicle maintenance
at fixed intervals (refer to the
"Maintenance and care" chapter).
This is displayed automatically, with
ignition key at MAR-ON, 2000 km
(or equivalent value in miles) before
servicing or, where provided, 30 days
before servicing. It is also displayed
each time the key is turned to MAR-ON
or, for versions/markets, where
provided, every 200 km (or equivalent
value in miles). Below this threshold
servicing indications are more frequent.
The display will be in km or miles
according to the unit of measurement
set. When the following scheduled
servicing is approaching, the
word “Service” will appear on the
display, followed by the number of
kilometres/miles or days (where
provided) left, when the key is turned to
MAR. Go to a Fiat Dealership, where
the "Service Schedule" operations will
be performed and the message will be
reset.
Airbag/Passenger airbag
(Activation/deactivation of
passenger side front airbag
and side bag for pelvis, chest
and shoulder protection) - for
versions/markets, where provided
This function is used to
activate/deactivate the front
passenger's airbag. Proceed as
follows:
press the MENU
button and,
after the display shows the message
"Bag pass: Off) (to deactivate) or the
message (Passenger Bag: On” (to
activate) through the pressing of the
+
and
–
buttons, press the MENU
button again;
a confirmation request message will
appear on the display;
press the
+
or
–
buttons to select
“Yes” (to confirm enable/disable) or
“No” (to abort);
press the MENU button
briefly,
a message confirming the selection
will be displayed and you will return to
the menu screen or hold the button
down to return to the standard screen
without storing.
Reset tyres (iTPMS reset)
(For versions/markets, where provided)
With this function it is possible to reset
the iTPMS (see paragraph “iTPMS”).
To carry out the Reset procedure
proceed as follows:
briefly press the MENU
button:
the display will show Reset;
press the
+
or
–
button to select
(“Yes” or “No”);
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
42
briefly press the MENU
button:
the display will show “Confirm”;
press the
+
or
–
button to select
("Yes" to reset or "No" to exit the video
page). A message confirming the
successful Reset will be displayed;
hold the MENU button
down
again to return to the standard screen
or to the main menu according to
where you are in the menu.
HEADLIGHT ALIGNMENT
With the ignition key at MAR and
dipped beam headlights on, press
the
–
button to adjust the headlights
upwards and the button to adjust the
headlights downwards.
TRIP COMPUTER
GENERAL INFORMATION
The Trip computer is used to display
information on car operation when
the ignition key is turned to MAR. It
is composed of two separate trips,
called “Trip A” and “Trip B”, which can
monitor the "entire mission" (journey)
independently from each other.
The following screens are available:
Instant info (versions with colour
display):
Range
Current Consumption
Trip A:
Engine coolant temperature
(versions with multifunction
display)
Range (versions with
multifunction display)
Average Fuel Consumption A
Current Consumption (versions
with multifunction display)
Average Speed A
Travel Distance A
Travel Time A (driving time)
Energy Recovery A
Energy consumption A (versions
with colour display)
Auxiliary battery A (versions with
colour display)
Trip B:
Average Fuel Consumption B
Average Speed B
Travel Distance B
Travel Time B (driving time)
Energy Recovery B
Energy consumption B (versions
with colour display)
Auxiliary battery B (versions with
colour display)
Best Average Consumption (versions
with colour display) displays a screen
summarising the best average
consumption. The icon
indicates
the best performance. This information
can be reset by resetting Trip A.
TPMS (for versions/markets, where
provided)
Nav Repeat (for markets/versions,
where provided)
NOTE "Range" and "Current
Consumption" values cannot be reset.
NOTE Both Trip A and Trip B can be
zeroed (reset - start of a new journey).
NOTE "Trip B" can be activated or
deactivated from the setup menu
on the display with the "Trip B
Activation/Data" function. For further
information see the “Display” paragraph
in this chapter.
NOTE The screen order may vary
between the multifunction and colour
displays.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
43
Engine coolant temperature
(versions with multifunction display)
Shows the engine coolant temperature
with an 8-level indicator on 4 circles
fig. 53. The circles (A) are progressively
coloured partially or fully from left to
right as the temperature increases.
A
53
F0S0691
HYBRID SYSTEM
SCREENS
Energy Recovery (Trip A/Trip B)
The screen in fig. 54 (for versions with
colour display) shows the cumulative
value (A) of the energy recovered
during car deceleration (with a gear
engaged) and used to recharge the
auxiliary battery.
Hold TRIP to Reset
Trip A
XXXX kWh
Energy Gain A
XXXX kWh
A
54
F0S0684
For versions with multifunction display,
the indicator light turns on during the
energy recovery phase. The amount
of energy recovered is shown in the
"Energy Recovery" item on the Trip
Computer.
Energy Flows
(versions with colour display)
The central area (A) of the screen
fig. 55 indicates the hybrid system
usage mode in real time by showing
the energy flow to and from the
auxiliary battery and electric motor in
different colours. The different types of
display are described in detail below:
C
A
B
D
E
Energy Flows
55
F0S0679
Driving with heat engine only:
white flows on a yellow background
(A) moving from the heat engine (D)
to the wheels indicate that the drive is
provided by the heat engine alone.
Auxiliary battery charging:
white
flows on a green background (E)
indicate that energy passes from the
wheels to the auxiliary battery (C). The
direction of the arrows (B) indicate the
flow direction.
NOTE If the conventional battery is
flat, there is no energy recovery to the
auxiliary battery, and so the screen
does not display the relative recharging
flows.
Electric motor assisting the
heat engine:
white flows on a blue
background (E) and the direction of the
arrows (B) from the auxiliary battery (C)
to the heat engine indicate combined
drive from the heat engine and electric
motor. The contribution of the electrical
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
44
motor is shown by the white flows on a
yellow background (A) from the auxiliary
battery (C).
Energy Consumption
(versions with colour display)
The auxiliary battery charge level is
indicated by set of 8 green bars (A)
fig. 56. The more coloured bars there
are, the greater the battery charge
state.
A
56
F0S0698
When the battery charge state is below
10%, the last bar remains on but is
yellow fig. 57. Some hybrid system
functions may be disabled in these
conditions.
B
57
F0S0702
Auxiliary battery
(versions with colour display)
The diagram fig. 58 shows in real time
the power provided by the auxiliary
battery during acceleration (light blue
bars) and the power accumulated
during deceleration (green bars, the
brightness of which is proportional to
how flat the battery is).
Aux Battery
Power
Charge
58
F0S0680
iTPMS SCREEN
(for versions/markets, where provided.
For versions with colour display)
The screen shows the tyre pressure
status. The screen of fig. 59 appears of
the pressure is correct.
59
F0S0496
For how the iTPMS operates, refer
to the "Driving assistance systems"
paragraph in the "Safety" chapter.
NAV REPEAT
(for versions/markets, where provided.
For versions with colour display)
When navigation is enabled through
the
Uconnect™
system, the road
directions are repeated on the display.
NOTE Nav repeat can be activated
from the setup menu on the display
with the "See navigation" function. For
further information see the “Display”
paragraph in this chapter.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
45
WARNING LIGHTS AND MESSAGES
IMPORTANT NOTES
WARNING Warning lights are accompanied by a specific message and/or sound when implemented on the instrument panel.
These indications are indicative and precautionary and as such must not be considered as exhaustive and/or alternative to the
information contained in the Owner Handbook, which you are advised to read carefully in all cases. In the event of a failure
indication, always refer to the contents of this chapter.
WARNING The failure indicators appearing on the display are divided into two categories: very serious and less serious faults.
Serious faults are indicated by a repeated and prolonged warning "cycle". Less serious faults are indicated by a warning
"cycle" with a shorter duration. The display cycle of both categories can be interrupted by pressing the MENU button
. The
instrument panel warning light will stay on until the cause of the malfunction is eliminated.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
46
WARNING LIGHTS ON INSTRUMENT PANEL
Red warning lights
Warning light
What it means
red
SEAT BELTS REMINDER
The warning light switches on constantly with the vehicle stationary and the driver's side or
passenger side seat belt (when the passenger is present) not fastened.
The warning light will flash and a buzzer will sound if the car is in motion and the front seat belts are
not correctly fastened.
For permanent deactivation of the acoustic signal (buzzer) of the S.B.R. (Seat Belt Reminder) system
contact a Fiat Dealership. The system can be reactivated at any time using the Setup Menu.
red
yellow
yellow (Versions with multifunction
display)
yellow (Versions with colour display)
EBD FAILURE
The simultaneous switching on of the warning lights with the engine on indicates either an anomaly
of the EBD system or that the system is not available. In this case, the rear wheels may suddenly
lock and the car may swerve when braking sharply. On some versions the display shows the
dedicated message.
Drive very carefully to a Fiat Dealership to have the system inspected.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
47
Warning light
What it means
red
CONVENTIONAL (LEAD) BATTERY NOT SUFFICIENTLY CHARGED
The warning light switches on when the ignition key is turned to MAR, but it should switch off
as soon as the engine has started (with the engine idling a brief delay before switching off is
acceptable).
If the warning light or the symbol on the display (together with a dedicated message on the display
on some versions) remains on, contact a Fiat Dealership immediately.
HYBRID SYSTEM FAILURE
The warning light or symbol also appears on the display in the event of a hybrid system failure. For
this warning, the warning light or symbol could appear together with the
symbol/warning light
(versions with colour display only) and/or
symbol, possibly with the corresponding dedicated
message. The charge state of the auxiliary battery will not be displayed in this case.
Contact a Fiat Dealership as soon as possible.
red
AIR BAG FAILURE
The warning light switches on when the ignition key is turned to MAR, but it should switch off after a
few seconds.
The warning light stays on constantly if there is a fault in the airbag system. On some versions the
display shows the dedicated message.
36) 37)
red
LOW BRAKE FLUID/HANDBRAKE ENGAGED
The warning light switches on when the ignition key is turned to MAR, but it should switch off after a
few seconds.
Low brake fluid level
The warning light turns on when the level of the brake fluid in the reservoir falls below the minimum
level, possibly due to a leak in the circuit. On some versions the display shows the dedicated
message.
38)
Handbrake engaged
The warning light switches on when the handbrake is engaged.
On certain versions, if the car is moving the acoustic warning will also sound.
IMPORTANT If the warning light turns on while driving, check that the handbrake is not engaged.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
48
Warning light
What it means
red
LOW ENGINE OIL PRESSURE
When the ignition key is turned to MAR, the warning light (for versions/markets, where provided)
switches on, but it should switch off as soon as the engine is started.
NOTE For versions/markets, where provided, the indicator may be amber. The warning light or the
symbol switches on constantly along with a message on the display (for versions/markets, where
provided) when the system detects that engine oil pressure is low.
39)
red
ENGINE COOLANT TEMPERATURE TOO HIGH
The warning light switches on when the ignition key is turned to MAR, but it should switch off after
a few seconds. The warning light or symbol on the display lights up when the engine is overheated,
on some versions, together with a dedicated message on the display.
In normal driving conditions
: stop the car, switch off the engine and check that the fluid level
in the reservoir is not below the MIN mark. In this case, wait for the engine to cool down, then
slowly and carefully open the cap, top up with coolant and check that the level is between the MIN
and MAX marks on the reservoir itself. Also check visually for any fluid leaks. If, when restarting, the
warning light switches on again, contact a Fiat Dealership;
If the car is used under demanding conditions
(e.g. when fully loaded): slow down and, if
the warning light stays on, stop the car. Stop for two or three minutes with the engine running and
slightly accelerated to facilitate better coolant circulation, then turn the engine off. Check that the
coolant level is correct as described above.
IMPORTANT Over demanding routes, it is advisable to keep the engine running and slightly
accelerated for a few minutes before turning it off. On certain versions a dedicated message is
displayed.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
49
Warning light
What it means
red
“DUALDRIVE” ELECTRIC POWER STEERING FAILURE
When the key is turned to MAR, the warning light switches on but it should switch off after a few
seconds. If the warning light stays on, on some versions along with a dedicated message on the
display, you may not have steering assistance and the effort required to operate the steering wheel
could be notably increased; steering is, however, possible.
In this case, contact a Fiat Dealership.
If the warning light switches on while driving (on some versions, together with a dedicated message
on the display) you may not have steering assistance. Although it will still be possible to steer
the vehicle, the effort needed to operate the steering wheel could be increased: contact a Fiat
Dealership as soon as possible.
IMPORTANT In some circumstances, factors independent of the electric power steering could
cause the warning light on the instrument panel to switch on. In this case, stop the car immediately
(should it be in motion), stop the engine for about 20 seconds and then restart the engine. If the
warning light stays on, contact a Fiat Dealership.
IMPORTANT NOTE The steering must be initialised after disconnecting the conventional battery. The
warning light turns on to indicate this. To carry out this procedure, simply turn the steering wheel all
the way from one end to the other or drive in a straight line for about a hundred metres.
red
OPEN DOORS / BONNET / BOOT (versions with multifunctional display)
The warning light appears on the display, together with a dedicated message, on some versions,
when one or more doors, the tailgate or the bonnet (for versions/markets, where provided) are not
properly closed. An acoustic warning is also emitted with the doors open and the car in motion.
Amber warning lights
Warning light
What it means
yellow
BRAKE PAD WEAR
The warning light switches on, together with a dedicated message on the display, if the front or rear
brake pads (on version/markets, where provided) are worn. In this case have them replaced as soon
as possible.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
50
Warning light
What it means
yellow (Versions with multifunction
display)
yellow (Versions with colour display)
ESC SYSTEM The warning light comes on when the ignition key is turned to MAR, but should go off
after a few seconds.
ESC system activation
Flashing of the warning light while driving indicates the intervention of the ESC system.
ESC system failure
If the warning light does not go off or stays on together with the LED on the ASR OFF button while
driving. The display will show a dedicated message. Contact a Fiat Dealership.
Hill Holder failure
This warning light switches on, on some versions together with a dedicated message on the display,
in the event of a Hill Holder system failure.
In this case, contact a Fiat Dealership as soon as possible.
yellow
INJECTION / EOBD SYSTEM FAILURE
Under normal conditions, the warning light comes on when the ignition key is turned to MAR, but
should go off as soon as the engine is started.
The warning light remains on or switches on while driving, on some versions together with a
dedicated message on the display, if the injection system is not working properly. In particular, if the
warning light switches on continuously, it indicates a malfunction in the supply/ignition system that
could cause excessive exhaust emissions, a possible loss of performance, poor driveability and high
fuel consumption.
Under these conditions, the vehicle can continue travelling at moderate speed without demanding
excessive effort from the engine. Prolonged use of the car with the warning light on may cause
damage. Contact a Fiat Dealership as soon as possible.
If the warning light is flashing, this indicates that the catalytic converter may be damaged. If the light
flashes, come off the accelerator pedal to reduce engine revs until the warning light stops flashing;
continue the journey at moderate speed, trying to avoid driving conditions that may cause further
flashing, and get to a Fiat Dealership as soon as possible.
40)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
51
Warning light
What it means
yellow
FIAT CODE SYSTEM FAILURE
With the ignition key in the MAR position, on some versions the warning light, or the symbol on the
display, turns on continuously, along with a dedicated message on the display, to signal a possible
Fiat CODE system failure.
If the warning light or symbol blinks on the display with engine running, it means that the vehicle is
not protected by the engine immobiliser device.
In this case, contact a Fiat Dealership as soon as possible.
yellow
FUEL RESERVE - LIMITED RANGE
The warning light switches on when the ignition key is turned to MAR, but it should switch off after a
few seconds. The warning light or the symbol switches on in the display when about 5 litres of fuel
are left in the tank. The triangle on the right side of the symbol indicates the side of the car with the
fuel filler.
IMPORTANT If the warning light flashes or the symbol is constantly on, depending on the versions,
there is a fault in the system. If this is the case, go to a Fiat Dealership to have the system checked.
yellow
REAR FOG LIGHT
The warning light switches on when the rear fog light is activated.
yellow
ABS FAILURE
The warning light switches on when the ignition key is turned to MAR, but it should switch off after a
few seconds. The warning light comes on, on some versions along with a message on the display,
when the system is inefficient or not available. In this case the braking system maintains its efficiency
unaltered but without the advantage of the ABS system.
Drive carefully and contact a Fiat Dealership as soon as possible.
yellow
GENERAL FAILURE INDICATION
The warning light switches on in the following circumstances. In these cases contact a Fiat
Dealership to have the problem fixed as soon as possible.
Engine oil pressure sensor failure
The warning light switches on when an engine oil pressure sensor anomaly is detected.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
52
Warning light
What it means
yellow
Fuel cut-off system intervention/failure
This warning light switches on, on some versions along with a dedicated message on the display, in
the case of fuel cut-off system activation/failure.
Exterior lights failure
The warning light switches on when an external light failure is detected.
Parking sensor failure
The warning light turns on and the dedicated message is shown on the display when a parking
sensor fault is detected.
Start&Stop system failure
(versions with multifunction display)
A failure of the system is indicated by the warning light switching on. A dedicated message will
appears on the instrument panel.
Airbag warning light fault
(for versions/markets where provided)
41)
The warning light blinks when a fault is detected in the warning light
yellow
START&STOP SYSTEM ON
This warning light switches on with fixed light, along with a dedicated message on the display on
some versions, in the case of Start&Stop system failure.
yellow
START&STOP SYSTEM OFF
Deactivation of the Start&Stop system is indicated by the warning light on the display turning on,
together with a dedicated message on the display on some versions.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
53
Warning light
What it means
yellow
iTPMS
(for versions/markets, where provided)
Low tyre pressure
The warning light switches on constantly to indicate that the tyre pressure is lower than the
recommended value, in order to guarantee long tyre life and low fuel consumption, or to indicate a
slow loss of pressure.
In this way the iTPMS warns the driver that one or more tyres may be flat and probably punctured.
In this case it is advisable to restore the correct pressure value. Once the normal operating
conditions of the car are restored, carry out the Tyre reset procedure.
IMPORTANT Do not continue driving with one or more flat tyres as handling may be compromised.
Stop the vehicle, avoiding sharp braking and steering.
iTPMS failure/iTPMS temporarily deactivated
The warning light flashes for about 75 seconds and then stays on constantly (along with a dedicated
message on the display) to indicate that the system is temporarily deactivated or faulty. The system
goes back to normal operation when the operating conditions allow it. If this is not the case, carry
out the Tyre reset procedure after restoring the normal operating conditions.
If the malfunction warning persists, contact a Fiat Dealership as soon as possible.
42) 43)
Green warning lights
Warning light
What it means
green
SIDE LIGHTS AND DIPPED BEAM HEADLIGHTS/FOLLOW ME HOME
Side lights and dipped beam headlights
The warning light switches on when the side lights or dipped headlights are turned on.
Follow Me Home
The warning light comes on, on some versions along with a dedicated message on the display,
when the "Follow me home" device is used.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
54
Warning light
What it means
green
FOG LIGHTS
The warning light comes on when the front fog lights are turned on.
green
LEFT DIRECTION INDICATOR
The warning light turns on when the direction indicator control lever is moved downwards or,
together with the right indicator, when the hazard warning light button is pressed.
green
RIGHT DIRECTION INDICATOR
The warning light turns on when the direction indicator control lever is moved upwards or, together
with the left indicator, when the hazard warning light button is pressed.
Blue warning lights
Warning light
What it means
blue
MAIN BEAM HEADLIGHTS
The warning light switches on when the main beam headlights are turned on.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
55
White warning lights
Warning light
What it means
white
ENERGY RECOVERY
(multifunction display only)
The indicator light turns on during energy recovery (deceleration with a gear engaged) for recharging
the auxiliary battery.
In some circumstances, the indicator light may turn on briefly when shifting gear. This does not
indicate a fault, so it is not necessary to go to a workshop.
36)
If, when the ignition key is turned to MAR, the warning light
does not switch on or stays on while driving, a failure may have occurred in
the restraint systems. In this case the airbags or pretensioners may not be deployed in an impact or, in a lower number of cases, they may be
deployed accidentally. Before continuing, contact a Fiat Dealership immediately to have the system checked.
37)
A failure of the warning light
is indicated by the
symbol appearing on the display or by the
warning light blinking, depending on
the version. In this case, the
warning light may not indicate a possible problem with the airbag restraint system. Before continuing, contact
a Fiat Dealership immediately to have the system checked.
38)
If the warning light
turns on when travelling (on certain versions together with the message on the display) stop the vehicle immediately
and contact Fiat Dealership.
39)
If the warning light
turns on whilst driving (on certain versions together with the message on the display) stop the engine immediately
and contact a Fiat Dealership.
40)
Go to a Fiat Dealership as soon as possible if the warning light
does not light up when the key is turned to MAR or if while travelling the
warning light switches on or flashes (along with a message and a symbol on the display on some versions). The operation of the
warning
light may be checked by the traffic police using specific devices. Comply with the laws and regulations of the country where you are driving.
41)
The flashing
warning light on indicates possible
warning light faults. In this case, the
warning light may not indicate a possible
problem with the airbag restraint system. Contact a Fiat Dealership immediately to have the system checked.
42)
If the system signals a pressure drop on a specific tyre, it is recommended to check the pressure on all four tyres. The iTPMS does not
relieve the driver from the obligation to check the tyre pressure every month; it is not to be considered a system to replace servicing or a safety
system. Tyre pressure must be checked with tyres cold. Should it become necessary for whatever reason to check pressure with warm tyres,
do not reduce pressure even though it is higher than the prescribed value, but repeat the check when tyres are cold.
43)
The iTPMS cannot indicate sudden tyre pressure drops (for example when a tyre bursts). In this case, stop the vehicle, braking with
caution and avoiding abrupt steering. The system only warns that the tyre pressure is low: it is not able to inflate them. Insufficient tyre inflation
increases fuel consumption, reduces the tread duration and may affect the capacity to drive safely.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст