Freightliner Coronado 132 / 122SD. Manual — part 30
Title of Maintenance Operation (MOP)
MOP Number
Aerodynamic Component Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60–02
Mirror Folding Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60–01
Cab
60
Index, Alphabetical
122SD and Coronado 132 Maintenance Manual, November 2014
60–01 Mirror Folding Check
For vehicles with folding main mirrors, make sure
that the mirrors fold freely on the pivot points. Pivot
each mirror fully forward and backward two times to
break loose any debris that may affect the fold-away
feature of the mirror.
60–02 Aerodynamic
Component Inspection
Inspect aerodynamic components, if equipped, for
structural damage, cracks, or wear. These may in-
clude:
• Chassis fairings
• Battery access kickplate
• Side skirts
• Cab side extenders
• Roof fairing/deflector
• Bumper
• Hood
Replace or repair damaged or missing components
as needed.
Cab
60
122SD and Coronado 132 Maintenance Manual, November 2014
60/1
Title of Maintenance Operation (MOP)
MOP Number
Door Seal, Door Latch, and Door Check Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72–01
Doors
72
Index, Alphabetical
122SD and Coronado 132 Maintenance Manual, January 2010
72–01 Door Seal, Door Latch,
and Door Check
Lubrication
NOTICE
Do not lubricate the door hinges. Lubrication
could adversely affect the performance of the
hinge bushings.
NOTE: Light penetrating oils, such as WD–40,
should not be used because they wash out ben-
eficial factory-installed grease, and they evapo-
rate.
Door Seals
Lightly coat the door seals with a lubricant that is
safe for rubber.
Door Latches
Wipe old grease and dirt from all door latch assem-
blies, then apply liberal amounts of an approved
grease to each moving joint; see
. Use an
appropriate applicator that will not leave material
behind.
Door Checks
Wipe old grease and dirt from door checks. Lubricate
each moving joint of the door checks at installation
and every six months thereafter, with an approved
grease; see
. Use an appropriate applicator
that will not leave material behind.
Approved Grease
Application
Lubricant
NLGI
Grade
Door Latches
ConocoPhillips Triton® 460
1.5
Door Checks
ConocoPhillips Megaplex® XD3
2
Table 1, Approved Grease
Doors
72
122SD and Coronado 132 Maintenance Manual, January 2010
72/1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст