Kia Carnival (2007 year). Manual — part 17

(1) Disconnect the No.1/No.2 knock sensor connectors(A,B), the oil pressure switch connector(C), the ignition coil

harness(D) and the No.1 VIS(Variable Induction System) connector(E).

(2) Disconnect the bank 1 front/rear O2 sensor connectors(A).

(3) Disconnect the injection connectors(A,B,C), the ground lines(D), the condenser connector(E) and the Ignition

coil connectors(F).

(4) Disconnect the injection harness connector(A), the No.2 VIS(Variable Induction System) connector(B), the

No.1/No.2 OCV(Oil Control Valve) connectors(C,D) and the OTS(Oil Temperature Sensor) connector(E).

(5) Disconnect the MAPS(Manifold Absolute Pressure Sensor) connector(A), the ETC(Electronic Throttle Control)

connector(B) and the PCSV(Purge Control Solenoid Valve) connector(C).

(6) Remove the cooling fan relay cable(A).

(7) Disconnect the generator connector(A) and the air conditioning compressor connector(B).

(8) Disconnect the bank 2 CMP sensor connector(A) and the WTS(Water Temperature Sensor) connector(B).

(9) Disconnect the bank 2 front/rear O2 sensor connectors(A,B) and the CKP sensor connector(C).

(10) Disconnect the bank 1 CMP sensor connector(A).

11. Disconnect engine wiring.

(1) Remove the engine room fuse and relay box cover(A).

(2) Disconnect the PCM connectors(B).

(3) Disconnect the FAM connectors(C)(Refer to HA group).

(4) Unscrew the FAM mounting bolts(D-3EA) and take the FAM(E) out of the splash shield(F).

(5) Disconnect the connector(G) from the splash shield(B).

12. Remove the heater hoses.

13. Disconnect the brake vaccume hose(A).

14. After draining or gathering power steering fluid, disconnect the power steering hose(A).

15. Remove the radiator grille upper cover(A) for convenience sake.

16. Disconnect the power steering return hose.

17. Remove the radiator support upper member assembly(A) for convenience sake.