Kia Carnival (2007 year). Manual — part 534

(12) Disconnect the brake vacuum hose.

(13) Remove the surge tank stay (A).

(14) Remove the connector bracket (A) from surge tank.

(15) Remove the surge tank (A).

Cover the inlet of intake manifold with a clean woven stuff or vinyl cover to prevent foreign materials from
entering.

10. Remove the cylinder head cover.

(1) Remove the connector bracket (A) from LH cylinder head cover.

(2) Disconnect the RH ignition coil connector (A), condenser connector (B) and remove the wiring bracket (C).

(3) Remove the LH, RH ignition coil.

(4) Remove the LH, RH cylinder head cover (A).

11. Using SST (09215-3C000) remove lower oil pan (A).

Be careful not to damage the contact surfaces of upper oil pan and lower oil pan.

12. Set a jack to the upper oil pan.

13. Remove the coolant reservoir tank.

14. Remove the engine mounting bracket (A).

15. Set No.1 cylinder to TDC/compression.

(1) Turn the crankshaft pulley and align its groove with the timing mark "T" of the lower timing chain cover.

Do not rotate engine counterclockwise.

(2) Check that the mark (A) of the camshaft timing sprockets are in straight line on the cylinder head surface as

shown in the illustration.
If not, turn the crankshaft one revolution (360°).

Do not rotate engine counterclockwise.

16. Remove the drive belt (A).

17. Using SST (09231-3C300) remove the crankshaft damper pulley (A).

18. Lift up the engine assembly to using the jack.