Kia Carnival (2007 year). Manual — part 134
2007 > 2.7L V6 GASOLINE >
COMPONENTS
2007 > 2.7L V6 GASOLINE >
REMOVAL
1. Loosen the wheel nuts slightly.
Raise the rear of the vehicle, and make sure it is securely supported.
2. Remove the rear wheel and tire (A) from rear hub (B).
Be careful not to damage the hub bolts (C) when removing the rear wheel and tire (A).
3. Remove the rear shock absorber assembly mounting bolts (A) and nut (B) from the baby.
4. Remove the rear shock absorber assembly nut (B) from the rear knuckle, then remove the shock absorber
assembly (A).
5. Remove the rear shock absorber bracket bolt (A).
INSTALLATION
1. Install the connecting bolt (A) between the rear shock absorber and the bracket.
Tightening torque Nm(kgf.m, lb-ft) :
160 ~ 180 (16 ~ 18, 115.7 ~ 130.2)
2. Install the rear shock absorber (A) to the knuckle temporarily.
3. Install the rear shock absorber bracket mounting bolts (A) and nut (B).
Tightening torque Nm(kgf.m, lb-ft) :
Bolt : 80 ~ 110 (8 ~ 11, 59.7 ~ 79.5)
Nut : 90 ~ 120 (9 ~ 12, 65.1 ~ 86.8)
4. Install the rear shock absorber (A) nut (B) to the knuckle.
Tightening torque Nm(kgf.m, lb-ft) :
160 ~ 180 (16 ~ 18, 115.7 ~ 130.2)
5. Install the wheel and the tire (A) to the rear hub (B).
Tightening torque Nm (kgf.m, lb-ft) :
90 ~ 110 (9 ~ 11, 65.1 ~ 79.5)
Be careful not to damage the hub bolts (C) when installing the rear wheel and tire (A).
INSPECTION
1. Check the rubber parts for damage or deterioration.
2. Check the shock absorber for abnormal resistance or unusual sounds.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст