Kia Carnival (2007 year). Manual — part 118

2007 > 2.7L V6 GASOLINE >

REMOVAL

1. Raise the vehicle and remove the wheel & tire assembly (A) from the front hub assembly (B).

Tightening torque Nm (Kgf.m, lb-ft):
90 ~ 110 (9.0 ~ 11.0, 65 ~ 80)

2. Remove the wheel speed sensor & wire (A) by loosening the bolts.

3. Disconnect the brake hose (A) from the strut assembly.

4. Unstake the driveshaft lock nut using a chisel and hammer.

5. Remove the driveshaft lock nut (A).

Tightening torque Nm (kgf,m, lb-ft):
245 ~ 275 (24.5 ~ 27.5, 177 ~ 199)

6. Remove the caliper assembly (A) from the knuckle and suspend it with wire.

Tightening torque Nm (kgf,m, lb-ft):
85 ~ 100 (8.5 ~ 10.0, 61 ~ 72)

7. Remove the split pin and castle nut from the tie rod end ball joint.

Tightening torque Nm (Kgf.m, lb-ft):
60 ~ 80 (6.0 ~ 8.0, 43 ~ 58)

8. Disconnect the tie rod end (A) from the knuckle using a SST (09568-4A000).

9. Remove the split pin and lower arm bolt and nut (A).

Tightening torque Nm (Kgf.m, lb-ft):
90 ~ 120 (9.0 ~ 12.0, 65 ~ 87)

10. Using a plastic hammer, disconnect the driveshaft (A) from the front hub assembly (B).

11. Remove the brake disc (A) from the front hub assembly.

12. Remove the knuckle from the strut assembly by loosening the bolts (A).