Kia Carnival (2007 year). Manual — part 330

3. Check for continuity between the terminals in each switch position according to the table.

TAILGATE LOCK SWITCH

1. Remove the tailgate trim panel. (Refer to the Body group - tailgate)

2. Disconnect the 6P connector from the actuator.

3. Check for continuity between the terminals in each switch position according to the table.

FRONT DOOR KIEY SWITCH

1. Remove the front door trim panel. (Refer to the Body group - Front door)

2. Disconnect the 3P connector from the actuator.

3. Check for continuity between the terminals in each switch position according to the table.

TAILGATE KEY SWITCH

1. Remove the tailgate trim panel. (Refer to the Body group - tailgate)

2. Disconnect the 3P connector from the actuator.

3. Check for continuity between the terminals in each switch position according to the table.

2007 > 2.7L V6 GASOLINE >

REPLACEMENT

DDM/ADM

1. Disconnect the negative battery terminal.

2. Remove the front door trim panel. (Refer to the Body group - Front door)

3. Remove the door module (A) mounting screws (5EA) after disconnecting the connector (3EA) from the actuator.

4. Remove the front door modules (DDMDM) from the front door trim panel.

INSPECTION

1. The DDM inputs can be checked using the scan tool..

2. To check the Input Value of door lock switch, select option "09. BODY CONTROL MODULE".

3. Select option "04. DRIVER DOOR MODULE".

4. Select option "02. CURRENT DATA".

5. To check the Input Value of door lock switch in force mode, select option "05. ACTUATION TEST".