Kia Carnival (2007 year). Manual — part 220

INSTALLATION

1. Adjust push rod length of the booster, and then install the seal on the booster assembly.

Standard length (A):
LHD : 112 ± 0.5 mm (4.43 ± 0.019 in.)
RHD : 115 ± 0.5 mm (4.53 ± 0.019 in.)

[LHD]

[RHD]

2. Insert the booster and tighten the nuts (C).

3. Connect the booster push rod and brake pedal with a pin (B) and install a snap clevis pin (A) to the clevis pin (B).

Grease the pin before installing the snap pin.
Always use a new snap pin.

4. Install the master cylinder.

5. Connect the vacuum hose to the brake booster.

6. After filling the brake reservoir with brake fluid, bleed the system (Refer to 'Bleeding of brake system',).

7. Check for fluid leakage.

8. Check and adjust the brake pedal for proper operation.

Master Cylinder

2007 > 2.7L V6 GASOLINE >

COMPONENTS