Kia Carnival (2007 year). Manual — part 361
5. Installation is the reverse of removal.
INSTALLATION
1. Install the rear wiper arm and blade to the specified position.
※ Specified position : The first defogger line from bottom of the rear window.
2. Set the rear washer nozzle on the specified spray position.
INSPECTION
1. Remove the 3P connector from the rear wiper motor.
2. Connect battery positive (+) and negative (-) cables to terminals 2 and 1 respectively.
3. Check that the motor operates normally. Replace the motor if it operates abnormally.
Rear Washer
Switch
2007 > 2.7L V6 GASOLINE >
INSPECTION
With the rear wiper & washer switch in each position, make sure that continuity exists between the terminals below. If
continuity is not as specified, replace the multifunction switch.
[LHD]
[RHD]
REAR WIPER & WASHER SWITCH
Rear Washer
Motor
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст