Kia Carens. Manual — part 72
Fuel System
Engine Control System - Idle Speed Control Actuator
(InodeA)
Fuel System
2001 > 1.8L DOHC >
Inspection
Ignition timing and idle speed
Ignition timing
1. Apply parking brake.
2. Warm up engine to normal operating temperature.
3. Turn OFF all electrical loads.
4. Connect timing light to number one spark plug wire.
A rubber inspection plug has been provided in the plastic coil cover (center of the cylinder head
cover)directly over the number one(1) spark plug wire. Remove the inspection plug and connect the
inductive pick-up of your tachometer or timing light to the number one(1) spark plug wire. If your
tachometer/timing light inductive pick-up is too large, the coil cover will have to be removed.
5. Verify that ignition timing marks on crankshaft pulley and timing mark on timing belt cover are aligned.
Ignition timing : BTDC 8° ± 5°(at idle speed)
Ignition timing is not adjustable.
6. If timing is not within the specified range, replace the ECM.
Idle speed
1. Apply parking brake.
2. Warm up the engine to normal operating temperature.
3. Turn OFF all electrical loads.
4. Connect inductive tachometer to number one (1) spark plug wire or connect tachometer pic-up lead to
terminal number three (0) in the data link connector(DLC).
The base idle speed is nor adjustable. The idle speed is automatically controlled by the engine control
module. Incorrect idle speed indicates a potential problem with the IAC system or an intake manifold
leak.
5. Check that idle speed is within specified range.
Idle speed (transaxle in"NEUTRAL") : 800 ± 50rpm
This is a "wasted spark" ignition system, some tachometers will indicate twice the actual engine speed.
6. Disconnect tachometer from DLC or spark plug wire.
7. Turn OFF engine.
Fuel System
Engine Control System - Main Relay
Fuel System
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст