Kia Carens. Manual — part 54
• Do not force tools between cylinder block and oil pan because this damage sealing surfaces.
• Do not damage sealing surfaces when removing old sealant.
7. Remove oil strainer.
INSTALLATION
• If oil pan reused remove all foreign material from sealing surfaces of cylinder block and oil pan.
• If bolts are reused remove old sealant from bolt threads.
1. Install oil strainer.
Tightening torque : 5.8~8.7lb-ft (7.8~11.8N·m, 0.8~1.2kg-m)
2. Apply a continuious bead of silicone sealant to baffle plate along inside of bolt holes on contact surface.
The oil pan nust be installed no longer than 5 minutes after silicone sealant is applied.
3. Install oil pan.
Tightening torque :
(A), (B), (C), (D) : 5.8~8.0lb-ft (7.8~10.8N·m, 0.8~1.1kg-m)
(E) : 28~38lb-ft (38~51N·m, 3.8~5.3kg-m)
4. Install front exhaust pipe.
Tightening torque :
(A), (B) : 27.5~38.3lb-ft (37.3~51.9N·m, 3.8~5.3kg-m)
(C) : 31.1~44.8lb-ft (42.2~60.8N·m, 4.3~6.2kg-m)
5. Install LH and RH side splash shields.
Tightening torque : 12~18lb-ft (16~24N·m, 1.6~2.4kg-m)
6. Fill with specified amount and type of engine oil.
7. Connect negative battery cable.
8. Start engine and check for leaks.
9. Check oil level and add oil if necessary.
Engine Mechanical System
Lubrication System - Oil Pump
Engine Mechanical System
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст