Kia Carens. Manual — part 256
Body (Interior and Exterior)
Seat Belt - Rear Seat Belt
Body (Interior and Exterior)
2001 > 1.8L DOHC >
Removal
Rear buckle assembly
1. Pull safety belts to rear through seats.
2. Remove one bolt from rear buckle assembly mounting bracket.
Removal
Rear lap/shoulder belt assembly
1. Remove one bolt from lap belt mounting bracket.
2. Remove anchor bolt.
3. Remove rear quarter trim. Refer to "trim" in this section.
4. Remove one bolt and one sheet metal screw to attach retractor assembly.
Installation
Rear buckle assembly
1. Install mounting bolt through bracket.
Tightening mounting : 40~47 Ib·ft (54~64 N·m, 5.5~6.5 kg·m)
2. Feed buckle between seat back and cushion without any twists.
Installation
Rear lap/shoulder belt assembly
1. Install retractor mounting bolt and sheet metal screw.
Tightening torque : bolt : 40~47 lb-ft (54~64 N-m, 5.5~6.5 kg-m)
2. Install rear quarter trim. Refer to "trim" in this section.
3. Install anchor bolt.
Tightening torque : 40~47 lb-ft (54~64 N-m, 5.5~6.5 kg-m)
4. Install one bolt from lap belt mounting bracket.
Tightening torque : 40~47 lb-ft (54~64 N-m, 5.5~6.5 kg-m)
Inspection
1. Inspect three buckle assembly mountings to ensure that they are secure. (This is done from rear of vehicle.)
2. Inspect remaining belt's mounting to ensure that it is secure. (This is done from rear of vehicle.)
3. Pull seat belts to rear between seatback and cushion.
4. Inspect outboard lap belt mountings to ensure that they are secure.
5. Remove rear quarter trim.
6. Inspect retractor assembly mountings to ensure that they are secure.
Body Electrical System
General Information
Body Electrical System
2001 > 1.8L DOHC >
Elelctrical wiring schematic
Ground points
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст