Kia Carens. Manual — part 179

10. Measure 3-4 clutch clearance.

A. Measure clearance between snap ring and retaining plate of 3-4 clutch.

B. If clearance is not within specification, adjust it by selecting correct thickness snap ring.

3-4 clutch clearance : 0.051~0.063 in (1.3~1.6 mm)

3-4 clutch snap ring size in (mm)

0.055 (1.4)

0.063 (1.6)

0.071 (1.8)

0.079 (2.0)

0.087 (2.2)

0.134 (3.4)

11. Check clutch operation as follows :

A. Install SST (0K201 190 016) as shown, and check clutch operation by applying compressed air.

Air pressure : 57 psi (392 kPa, 4.0 kg/cm²) maximum

12. Apply petroleum jelly to thrust bearings and secure them to each side 3-4 clutch drum.

Thrust bearing outer diameter
Planetary carrier side : 2.21 in (56.1 mm)
Output shell side : 2.84 in (72.1 mm)

Automatic Transaxle System

Gear System - Input Shaft

Automatic Transaxle System

2001 > 1.8L DOHC >

Component

Component