Kia Mentor / Sephia Electrical System. Manual — part 210
* DRIVETRAIN SYSTEMS UNIFORM INSPECTION GUIDELINES *
Mounting hole worn,
affecting performance .. A . . . Require replacement.
Mounting hole worn, not
affecting performance .. .. . . No service suggested or
required.
Rubber deteriorated,
affecting performance .. A . . . Require replacement.
Rubber deteriorated, not
affecting performance .. .. . . No service suggested or
required.
Threads damaged . . . A .. Require repair or replacement.
Threads stripped (threads
missing) . . . ... A . . . Require replacement.
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
ODOMETER DRIVES (MECHANICAL)
See SPEEDOMETER/ODOMETER DRIVES (MECHANICAL).
ODOMETER HEADS (MECHANICAL)
See SPEEDOMETER/ODOMETER HEADS (MECHANICAL).
OIL PANS
See TRANSMISSION PANS.
PANS
See TRANSMISSION PANS.
PILOT HOLES
See DOWEL PINS, GUIDES AND PILOT HOLES.
PRESSURE PLATES
PRESSURE PLATE INSPECTION
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Condition Code Procedure
Balance weight missing .. C . . . Require replacement.
Broken . . . . .. A . . . Require replacement.
Contact surface
distorted . . . .. B . . . Require replacement.
Cracks . . . . .. B . . . Require replacement.
Fingers bent . . . A . . . Require replacement.
* DRIVETRAIN SYSTEMS UNIFORM INSPECTION GUIDELINES *
Hard spots . . . .. B . . . Require replacement.
Scored . . . . .. B . . . Require replacement.
Spring rate less than
specifications . . . B . . . Require replacement.
Worn, affecting
performance . . . A . . . Require replacement.
Worn beyond
specifications . . . B . . . Require replacement.
Worn close to the end of
its useful life . . 1 . . . Suggest replacement.
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
PRESSURE SWITCHES
See SWITCHES.
RACES
See BEARINGS AND RACES.
RUBBER JOINTS (METALASTIC)
These joints may be found on half and/or drive shafts. They
are usually found on European vehicles featuring a three-lug drive
flange. They may be equipped with a centering ball or pin.
RUBBER JOINT (METALASTIC) INSPECTION
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Condition Code Procedure
Drive flange bent . ... A . . . . Require repair or
replacement.
Drive flange damaged,
affecting performance .. A . . . Require replacement.
Rubber drive joint
cracked . . . . 2 . . . Suggest replacement.
Rubber drive joint
damaged, affecting
performance . . . A . . . Require replacement.
Rubber drive joint split
between mounting holes . A . . . Require replacement.
Rubber drive joint torn at
mounting holes . . . A . . . Require replacement.
Rubber drive joint weather-
cracked . . . . .. . . No service suggested or
required.
* DRIVETRAIN SYSTEMS UNIFORM INSPECTION GUIDELINES *
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
SCREENS
See FILTERS AND SCREENS.
SEALS
SEAL INSPECTION
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Condition Code Procedure
Leaking . . . . . A . . ... (1) Require repair or
replacement.
(1) - Require inspection of mating and sealing surface and
repair or replace as necessary. Check vent. A plugged
vent may force fluid past the seal.
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
SEALS (METAL-CLAD)
See SEALS.
SELECTOR INTERLOCK SYSTEMS
See
SHIFT INTERLOCK SYSTEMS (SELECTOR AND KEY INTERLOCK SYSTEMS).
SERVOS
See ACTUATORS (VACUUM).
SHIFT INTERLOCK SYSTEMS (SELECTOR AND KEY INTERLOCK SYSTEMS)
See:
ACTUATORS (ELECTRICAL)
CABLES
LINKAGES (EXTERNAL)
SWITCHES
SENSORS
SENSOR INSPECTION
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Condition Code Procedure
* DRIVETRAIN SYSTEMS UNIFORM INSPECTION GUIDELINES *Article Text (p. 41)
1996 Kia SephiaFor 1 1 1 1 1
Attaching hardware
broken . . . . . A ... Require repair or replacement
of hardware.
Attaching hardware
missing . . . . C . . .. Require replacement of
hardware.
Attaching hardware not
functioning . . . A ... Require repair or replacement
of hardware.
Connector broken . . A .. Require repair or replacement.
Connector (Weatherpack
type) leaking . . .. A .. Require repair or replacement.
Connector melted . . A . . ... (1) Require repair or
replacement.
Connector missing . ... C . . . Require replacement.
Inoperative . . . . A . . ... (2) Require repair or
replacement.
Leaking
(vacuum/fluid/air) . . A . . . Require replacement.
Out of adjustment . ... B . . .. (3) Further inspection
required.
Terminal broken . . . A .. Require repair or replacement.
Terminal burned, affecting
performance . . . A . . ... (1) Require repair or
replacement.
Terminal burned, not
affecting performance .. 2 .. Suggest repair or replacement.
Terminal corroded,
affecting performance .. A .. Require repair or replacement.
Terminal corroded, not
affecting performance .. 2 .. Suggest repair or replacement.
Terminal loose, affecting
performance . . . B .. Require repair or replacement.
Terminal loose, not
affecting performance .. 1 .. Suggest repair or replacement.
Threads damaged . . . A .. Require repair or replacement.
Threads stripped (threads
missing) . . . ... A . . . Require replacement.
(1) - Determine cause and correct prior to repair or
replacement of part.
(2) - Inoperative includes intermittent operation or out of
specification.
(3) - Follow OEM recommended adjustment procedures. Repair
or replace if out of specification.
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст