Kia Carnival / Sedona (2006 year). Manual — part 6

Body

Dimensions

BD

GENERAL

. . . . . . . . . . . . . . . BD - 2

MEASUREMENT METHOD

. . . . . ... BD - 2

PROJECTED DIMENSIONS . . . . . . . BD - 2
ACTUAL-MEASUREMENT DIMENSIONS . .. BD - 3
MEASUREMENT POINT . . . . . . . . .. BD - 3

FRONT BODY

. . . . . . . . . . . . . BD - 4

SIDE BODY (FRONT)

. . . . . . . . ... BD - 6

SIDE BODY (REAR)

. . . . . . . . . . BD - 8

INTERIOR A

. . . . . . . . . . . . . . BD - 10

INTERIOR B

. . . . . . . . . . . . . . BD - 12

INTERIOR C

. . . . . . . . . . . . . . BD - 14

REAR BODY

. . . . . . . . . . . . . BD - 16

UNDER BODY
(PROJECTED DIMENSIONS)

. . . . ... BD - 18

UNDER BODY
(STRAIGHT-LINE DIMENSIONS)

. . . BD - 21

BD-2

BODY DIMENSIONS

GENERAL

1.

Basically, all measurements in this manual are taken
with a tracking gauge.

2.

When a measuring tape is used, check to be sure
there is no elongation, twisting or bending.

3.

For measuring dimensions, both projected dimension
and actual-measurement dimension are used in this
manual.

BMCBD6001

Projected Dimension

Height

MEASUREMENT METHOD

PROJECTED DIMENSIONS

1.

These are the dimensions measured when the
measurement points are projected into the reference
plane, and are the reference dimensions used for body
alterations.

2.

If the length of the tracking gauge probes are
adjustable, make the measurement by lengthening one
probe by the amount equivalent to the difference in
height of the two surfaces.

BODY DIMENSIONS

BD-3

ACTUAL-MEASUREMENT DIMENSIONS

1.

These dimensions indicate the actual linear distance
between measurement points, and are the reference
dimensions for use if a tracking gauge is used for
measurement.

2.

Measure by first adjusting both probes to the same
length (A=A')

CAUTION

Check the probes and gauge itself to make sure
there is no free play.

MEASUREMENT POINT

1.

Measurements should be taken at the hole center.

BMCBD6002

Actually-Measured Dimension

A

A'

BMCBD6003

Hole Center

BD-4

BODY DIMENSIONS

FRONT BODY

Point symbol

Length(mm)

Point symbol

Length(mm)

A-A'

G-G'

A-B

H-H'

A-B'

H-G

B-B'

H-G'

C-C'

D-D'

E-E'

F-F'

1660

1552.1

584.4

1273

584.4

1562.5

1484.8

1562.5

1071.1

1310.5

1104.1

1120

* These dimensions indicated in this figure are actual-measurement dimensions.

BVQBD6100

A

A'

B

B'

G'

H'

H

G

C'

C

D'

D

E'

E

F'

F