Kia Carnival (2009+). Manual — part 74

14. Tighten the transaxle insulator mounting bolt (A).

TORQUE:
90~110 Nm(900~1100 kgf.cm, 65.1~79.5 lb-ft)

15. Tighten the transaxle mounting bolts (A).

TORQUE:
65~85 Nm(650~850 kgf.cm, 47.0~61.5 lb-ft)

[2.9 DSL]

[3.8 GSL]

16. Remove the SST (09200-38001) holding the engine and transaxle assembly.

[2.9 DSL]

[3.8 GSL]

17. Connect the transaxle oil cooler hoses (A) to the tubes (C) by fastening the clamps (B).

18. Install the shift cable by tightening the bolt (A) and clip (B).

TORQUE:
10~14 Nm(100~140 kgf.cm, 7.2~10.1 lb-ft)

19. Connect the transaxle wire harness connectors.

(1) Install the inhibiter switch connector (A).

(2) Install the solenoid valve connector (A).

[2.9 DSL]

[3.8 GSL]

(3) Install the input speed sensor connector (A).

(4) Install the output speed sensor connector (A).

(5) Install the vehicle speed sensor connector (A).

(6) Install the CKP sensor connector (A).

20. Install the battery tray (B) by tightening the four mounting bolts (A).