Kia Carnival (2009+). Manual — part 549
2009 > G 2.7 DOHC >
INSPECTION
1. Ignition "ON"
2. Using the scan tool.
3. Check the frequency of humidity sensor between terminals 2 and 3.
Humidity (%)
Frequency between terminals 2and 3 (Hz)
30
6976 ± 5%
50
6728 ± 5%
60
6600 ± 5%
70
6468 ± 5%
80
6330 ± 5%
90
6186 ± 5%
4. If the measured resistance is not specification, substitute with a known-good humidity sensor and check for proper
operation.
5. If the problem is corrected, replace the Humidity sensor.
REPLACEMENT
1. Disconnect the negative (-) battery terminal.
2. Remove the center facia lower panel (A). (Refer to BD group)
3. Disconnect the humidity sensor connector (A).
4. Loosen 2 screws and then remove the humidity sensor (B).
5. Installation is the reverse order of removal.
Heating,Ventilation, Air Conditioning
Heater - Heater Unit
Heating,Ventilation, Air Conditioning
2009 > G 2.7 DOHC >
COMPONENT LOCATION
COMPONENTS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст