Kia Carnival (2009+). Manual — part 461

2009 > G 2.7 DOHC >

COMPONENT LOCATION

Body Electrical System

Seat Electrical - Power Seat Motor

Body Electrical System

2009 > G 2.7 DOHC >

REPLACEMENT

FRONT HEIGHT MOTOR

1. Disconnect the negative (-) battery terminal.

2. Remove the seat cushion (Refer to Body group - front seat).

3. Remove the front height motor (A) after loosening the mounting nuts (2EA) , bolt (1EA) and removing connector.

4. Installation is the reverse of removal.

REAR HEIGHT MOTOR

1. Disconnect the negative (-) battery terminal.

2. Remove the seat cushion (Refer to Body group - front seat).

3. Remove the rear height motor (A) after removing the mounting bolt (2EA) and connector.

4. Installation is the reverse of removal.

SLIDE MOTOR

1. Disconnect the negative (-) battery terminal.

2. Remove the seat cushion (Refer to Body group - front seat).

3. Remove the slide motor (A) after removing the mounting bolt (2EA) and connector.

4. Installation is the reverse of removal.

SLIDE MOTOR

1. Disconnect the negative (-) battery terminal.

2. Remove the seat cushion (Refer to Body group - front seat).

3. Remove the slide motor (A) after removing the mounting bolts (2EA) and connector.

4. Installation is the reverse of removal.

RECLINING MOTOR

1. Disconnect the negative (-) battery terminal.

2. Remove the seat back (Refer to Body group - front seat).

3. Remove the seat shaft fixing clip (A) and seat shaft (B).

4. Remove the relining motor (A) after removing the mounting nut (1EA) and connector.