Kia Carnival (2009+). Manual — part 180
hinge
Always use Genuine Kia parts and recommedended fluid.
Using any other type of parts and fluid can cause serious damaged if the vehicle.RECOMMENDED LUBRICANTS
LUBRICANTS CAPACITIES
Description
2.7
3.8
2.9
Engine oil
Oil pan
4.2 (4.44, 3.70)
5.5 (5.81, 4.84)
5.4 (5.70, 4.75)
Oil filter
0.3 (0.32, 0.26)
0.4 (0.42, 0.35)
0.6 (0.63, 0.52)
Total
4.5 (4.76, 0.26)
6.4 (6.76, 5.63)
6.0 (6.3, 5.2)
Cooling system
8.2~8.3
(8.66~8.77, 7.22~7.3)
8.6 (9.09, 7.57)
10 (10.56, 8.8)
Manual transaxle
1.85 (1.95, 1.62)
-
1.85 (1.95, 1.62)
Automatic transaxle
10.7 (11.3, 9.41)
10.9 (11.52, 9.59)
10.7 (11.3, 9.41)
Power steering
1.0 (1.06, 0.88)
1.0 (1.06, 0.88)
1.0 (1.05, 0.87)
Capacities : [liter (U.S.qus, lmp.qts)]
SELECTION OF ENGINE OIL (Gasoline-3.8)
RECOMMENDED ILSAC classification : GF-3 OR ABOVE
RECOMMENDED API classification : SL(SJ) OR ABOVE
RECOMMENDED SAE viscosity grades :
For best performance and maximum protection of all types of operation, select only those lubricants which.
1. Satisfy the requirements of the API classification.
2. Have the proper SAE grade number for expected ambient temperature range.
3. Lubricants that do not have both an SAE grade number and API service classification on the container should
not be used.
SELECTION OF ENGINE OIL (Gasoline-2.7)
RECOMMENDED ILSAC classification : GF-3 OR ABOVE
RECOMMENDED API classification : SL(SJ) OR ABOVE
RECOMMENDED SAE viscosity grades :
For best performance and maximum protection of all types of operation, select only those lubricants which.
1. Satisfy the requirements of the API classification.
2. Have the proper SAE grade number for expected ambient temperature range.
3. Lubricants that do not have both an SAE grade number and API service classification on the container should
not be used.
SELECTION OF ENGINE OIL (Diesel)
RECOMMENDED API classification : CH-4 ABOVE
RECOMMENDED SAE viscosity grades :
For best performance and maximum protection of all types of operation, select only those lubricants which.
1. Satisfy the requirements of the API classification.
2. Have the proper SAE grade number for expected ambient temperature range.
3. Lubricants that do not have both an SAE grade number and API service classification on the container should
not be used.
GENERAL SERVICE INFORMATION
PROTECTION OF THE VEHICLE
Always be sure to cover fenders, seats, and floor areas before starting work.
The support rod must be inserted into the hole near the edge of the hood whenever you inspect the engine
compartment to prevent the hood from falling and causing possible injury.
Make sure that the support rod has been released prior to closing the hood. Always check to be sure the hood is
firmly latched before driving the vehicle.
PREPARATION OF TOOLS AND MESURING EQUIPMENT
Be sure that all necessary tools and measuring equipment are available starting work.
SPECIAL TOOLS
Use special tools when they are required.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст