Kia Carnival (2009+). Manual — part 364
• If the pad thickness is out of specilfication, left and right pads must be replaced as a complete set.
• When the thickness difference between the left pad and right pad is large, check the sliding condition of
the piston and the guide rod.
INSPECTION OF REAR DISC BRAKE PAD
1. Check the rear disc brake pad thickness through the caliper body inspection hole.
Pad thickness
Standard value : 10.0 mm (0.39 in)
Service limit : 2.0 mm (0.0787 in)
• If the pad thickness is out of specification, left and right pads must be replaced as a complete set.
• When the thickness difference between the left pad and right pad is large, check the sliding condition of
the piston and the guide rod.
Brake System
Brake System - Brake Booster
Brake System
2009 > G 2.7 DOHC >
COMPONENTS
2009 > G 2.7 DOHC >
Removal
1. Disconnect the vacuum hose (A) from the brake booster (B).
[LHD]
[RHD]
2. Remove the master cylinder (Refer to 'Master cylinder removal').
3. Remove the snap pin (A) and clevis pin (B).
4. Remove the four booster mounting nuts (C).
5. Remove the brake booster (A).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст