Kia Carnival (2009+). Manual — part 167

4. Install the rear shock absorber (A) nut (B) to the knuckle.

Tightening torque Nm(kgf.m, lb-ft) :
160 ~ 180 (16 ~ 18, 115.7 ~ 130.2)

5. Install the wheel and the tire (A) to the rear hub (B).

Tightening torque Nm (kgf.m, lb-ft) :
90 ~ 110 (9 ~ 11, 65.1 ~ 79.5)

Be careful not to damage the hub bolts (C) when installing the rear wheel and tire (A).

INSPECTION

1. Check the rubber parts for damage or deterioration.

2. Check the shock absorber for abnormal resistance or unusual sounds.

Suspension System

Rear Suspension System - Rear Upper Arm

Suspension System

2009 > G 3.8 DOHC >

COMPONENTS

2009 > G 3.8 DOHC >

REMOVAL

1. Loosen the wheel nuts slightly. Raise the rear of the vehicle, and make sure it is securely supported.

2. Remove the rear wheel and tire (A) from rear hub (B).

Be careful not to damage the hub bolts (C) when removing the rear wheel and tire (A).

3. Remove the brake caliper mounting bolts (A), and then place the brake caliper assembly (B) with wire as shown in

the illustration.

4. Remove the rear upper arm ball joint self-locking nut (A) and the cotter pin.