Kia Carnival (2009+). Manual — part 424

8. Disconnect the seat cushion pad (B) from the track (A).

9. After removing the hog-ring clips (A) on the front of seat cushion remove the seat cushion cover (B).

10. Installation is the reverse of removal.

A. To prevent wrinkles, make sure the material is stretched evenly over the cover (B) before securing the hogring

clips (A).

B. Replace the hogring clips with new ones using special tool (C).

SEAT BACK FRAME REPLACEMENT

1. Remove the following items.

A. Recliner cover.
B. Seat back panel.
C. Headrest guide.
D. Seat back cover.

2. Remove the pad (A) from frame (B).

- Remove the side air bag for replacing side air bag installation seat.
- Be fore service, be fully aware of precautions and service procedure relevant to air bag (See page RT-

Airbag).

3. Installation is the reverse of removal.

SEAT TRACK REPLACEMENT

1. Remove the recliner cover.

2. Remove the seat cushion cover.

3. Remove the seat track (A).

4. Installation is the reverse of removal.

SEAT BACK HEATER REPLACEMENT

1. Remove the seat back cover.

2. Cut the heater (A) attached to the pad (B), as shown in the picture.

3. Take off the paper from the backside of the heater assembly.

4. Attach the heater to the main part of pad.

5. Install the seat back cover.

SEAT CUSHION HEATER REPLACEMENT

1. Remove the seat back cover.

2. Cut the heater (A) attached to the pad (B), as shown in the picture.

3. Take off the paper from the backside of the heater assembly.

4. Attach the heater to the main part of pad.

5. Install the seat back cover.