Kia Carnival (2009+). Manual — part 293
2009 > G 2.7 DOHC >
SPECIAL TOOLS
Item(Namber&Name)
Illustration
Use
09452-21200
Oil seal installer
Oil seal installation
09200-38001
Engine supporting fixture
Removal and installation of transaxle
09455-32200
Oil seal puller
Removal of oil seal
09455-21000
Bearing&gear puller
Removal of taper roller vearing
09432-33200
plate
Removal of oil seal
09478-26100
Backing plate remover
Removal of 4WD coupling backing plate
09478-26000
Flange oil seal installer
Installation of 4WD coupling flange oil seal
Manual Transaxle System
Manual Transaxle System
Manual Transaxle System
2009 > G 2.7 DOHC >
SERVICE ADJUSTMENT PROCEDURE
Transmission oil inspection and replacement
1. After parking the vehicle on a plain, stop the engine.
2. After removing the oil filler plug and washer, inspect the manual transaxle fluid condition and quantity.
3. If the manual transaxle fluid is contaminated, drain it out by removing the oil drain plug.
4. Tighten the new oil drain plug and feed manual transaxle fluid to a proper level.
TORQUE:
29.4~34.4 Nm(3.0~3.5kgf.m, 21.7~25.3lb-ft)
Oil type: SAE75W/85
Oil quantity:
1.9 liter(2.0077 US qt, 1.6718 lmp qt)
5. Retighten the oil filler plug with a new washer.
TORQUE:
29.4~34.4 Nm(3.0~3.5kgf.m, 21.7~25.3lb-ft)
Back up lamp switch inspection
1. Disconnect the back up lamp switch connector(B).
2. Inspect the continuity of the switch. When the shift lever is located in reverse range, it should be applied an electric
current.
3. Replace the back up lamp switch, if necessary.
TORQUE:
29.4~34.4 Nm(3.0~3.5kgf.m, 21.7~25.3lb-ft)
2009 > G 2.7 DOHC >
COMPONENTS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст