Kia Carnival (2009+). Manual — part 16

12. Install the oil pipe(B), hose(C) to generator pressure pump(A).

Oil pipe eyd bolt
Tightening torque :
19.6~24.5Nm (2.0~2.5kgf.m, 14.5~18.1lb-ft)

13. Install the hose(C,D) and the pipe(E) to the ventilation housing(A) and the air separator(B).

14. Install the timing belt.

15. Install the intake manifold.

16. Install the exhaust manifold.

17. Install the injection pipe, injector. (Refer to FL- injector.)

18. Install the wire harness and the clamp to the cylinder head and the intake manifold.

(1) Install the air heater(A), CMP (Camshaft Position Sensor) connector(B).

(2) Install the oil pressure switch connector(A).

(3) Install the air conditioner condenser(A).

(4) Install the knock sensor connector(A), high pressure pump fuel hose(B), high pressure pump connector(C).

(5) Install the ground cable(A) from cylinder head.

(6) Install the injector connector(A), common rail pressure sensor connector(B), wire harness protector(C).

(7) Install the generator connector(A) and the ETC(Engine Coolant Temperature) sensor connector(B).

19. Install the intercooler hose(A,C), pipe(B).

20. Install the PCV(Positive Crankcase Ventilation) hose(A), EGR valve vacuum hose(B), EGR cooler water hose(C),

pump vacuum oil hose(D).

21. Install the reservoir tank hose(A).

22. Install the radiator upper hose(A).

23. Install the intake air hose and air cleaner assembly.

(1) Install the air intake hose(A).